321-340 of 532
ESGTS20 - Nsi

Easy-Splice Gel Tap Splice Kit With Connector For #14 - 2/0 Awg The Easy-Splice Gel Tap Splice Kit Provides A Fast and Simple Method For Connecting, Insulating, and Environmentally Sealing Low-Voltage Splices. The Splice Kit Is Designed For Underground and Overhead Environments and Is Useful For Street Lighting Applications. The Splice Kit'S Dual-Rated Mechanical Connector Splices A Wide Range Of Cables, Including Copper and Aluminum. The Connector'S Four Port Design Allows Maximum Inventory Flexibility. T

  • MFR Part #: ESGTS-2/0
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($153.72) ·
ESGTS20 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$51.24

Each

QTY:
Each
Add
IPLD7503 - Nsi

The Polaris IPLD750-3 Multi-Tap Dual-Sided Entry Connector Features 3 Ports Sized For 750 - 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays,

  • MFR Part #: IPLD750-3
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($543.93) ·
IPLD7503 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$181.31

Each

QTY:
Each
Add
ISPB202 - Nsi

The Polaris ISPB2/0-2 Multi-Tap Direct Burial Single-Sided Entry Connector Features 2 Ports Sized For 2/0 - 14 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrench, W

  • MFR Part #: ISPB2/0-2
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($127.44) ·
ISPB202 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$42.48

Each

QTY:
Each
Add
ISR600 - Nsi

Insulated Butt Splice, #6 Awg Conductor Size, 600 Kcmil Conductor Size, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, -45 °C (Cold) Operating Temperature, +90 °C Operating Temperature, 5.83 In Overall Length, 600 V, 1 LB

  • MFR Part #: ISR-600
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($195.78) ·
ISR600 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$97.89

Each

QTY:
Each
Add
L1N - Nsi

2 Hole Long Barrel Copper Compression Lug 1 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

  • MFR Part #: L1N
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($748.42) ·
L1N - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$1,496.85

Per 100

QTY:
Each
Add
L750N - Nsi

2 Hole Long Barrel Copper Compression Lug 750 MCM-1/2" Bolt - 1 3/4" Mounting Hole Spacing Long Barrel Copper Compression Lugs Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

  • MFR Part #: L750N
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($195.08) ·
L750N - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$6,502.70

Per 100

QTY:
Each
Add
PTS300 - Nsi

Solid Pin Terminal For Copper and Aluminum Conductors 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTS300
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
PTS300 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$4,451.63

Per 100

QTY:
Each
Add
SPM7L - Nsi

Service Post Connector, #1 Awg (Solid);2/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/4 In (Stud) Overall Length, 600 V Ac, 2.76 LB/Ea

  • MFR Part #: SPM-7L
  • Nacogdoches Availability: In Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($479.16) ·
SPM7L - Nsi Industries

Nacogdoches Availability: In Stock

Total Availability: In Stock

Book Price

$7,986.03

Per 100

QTY:
Each
Add
3350T2 - Nsi

3 Port Aluminum Dual Rated Transformer Lug 350 MCM - 6 Awg With 2 Mounting Holes Aluminum Dual Rated Transformer Lugs Are Versatile and Reuseable Set Screw Connectors Made Of 6061T-6 Aluminum Alloy For Superior Electrical and Mechanical Performance. Two Set Screws Per Wire Hole Ensure An Exceptional Connection. Electro-Tin Plated For Low Resistance. For Use With Copper or Aluminum Conductors. Mounting Hole Spacing Is Nema 1-3/4". Meets or Exceeds Ansi C119.4 Class A. Rated 600 Volts. Temperature Rating 90

  • MFR Part #: 3-350T2
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
3350T2 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$55.24

Each

QTY:
Each
Add
EWDT9HD - Nsi

Easy-Wrap Heavy Duty Duct Tape 1.88 X 60

  • MFR Part #: EWDT-9HD
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
EWDT9HD - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$19.71

Each

QTY:
Each
Add
IPCS1010 - Nsi

Insulation Piercing Connector 1/0 - 8 Awg Insulation Piercing Connectors Are Made For Use With Copper-Copper, Copper to Aluminum and Aluminum to Aluminum Applications. They Are Safe to Use and Are Completely Insulated, No Need to Strip Wire. They Can Be Installed On Energized Conductors With No Contact At Any Point. No Spacer Required Between Connections. Exclusive "Turbo Spacer" Keeps Tap Side Open While Main Conductor Is Being Tightened. Watertight

  • MFR Part #: IPCS1010
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($269.28) ·
IPCS1010 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$4,488.00

Per 100

QTY:
Each
Add
IPLD2508 - Polaris

The Polaris IPLD250-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

  • MFR Part #: IPLD250-8
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Polaris
  • Find: Similar Items
  • Pkg Sizes: 3 ($424.20) ·
IPLD2508 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$141.40

Each

QTY:
Each
Add
IPLD6003 - Nsi

The Polaris IPLD600-3 Multi-Tap Dual-Sided Entry Connector Features 3 Ports Sized For 600 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays

  • MFR Part #: IPLD600-3
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($425.13) ·
IPLD6003 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$141.71

Each

QTY:
Each
Add
L156 - Nsi

1 Hole Long Barrel Copper Compression Lug 1 Awg - 5/16 Inch Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L156
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
L156 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$704.34

Per 100

QTY:
Each
Add
L838 - Nsi

1 Hole Long Barrel Copper Compression Lug 8 Awg - 3/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L838
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
L838 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$352.39

Per 100

QTY:
Each
Add
N500SP - Nsi

All Purpose Split Bolt Connector 500 MCM Is Used For Combinations Of Aluminum to Copper, Aluminum to Aluminum, Steel to Aluminum, Copper to Copper, and Steel to Copper Applications. They Have An Electro-Tinned Body. Ul Listed For Copper and Copperweld Wires Only. Includes Nut, Spacer and Pressure Pad.

  • MFR Part #: N-500SP
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($243.43) ·
N500SP - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$8,114.37

Per 100

QTY:
Each
Add
PT300 - Nsi

Stranded Bi-Metallic Pin Terminal 300 MCM Stranded Bi-Metallic Pin Terminals Is Designed to Facilitate Termination Of Aluminum Conductors. Tin-Plated Stranded Copper Pin. Connector Bores Are Coated With Oxide Inhibitor. Supplied With Epdm Insulating Cover. Ul 486B Listed. Rated 600 Volts.

  • MFR Part #: PT300
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
PT300 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$54.76

Each

QTY:
Each
Add
SPM29L - Nsi

Service Post Connector, #1 Awg (Solid);4/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 2 Conductors, +90 °C Operating Temperature, 1-1/2 In (Stud) Overall Length, 600 V Ac, 1.97 LB/Ea

  • MFR Part #: SPM-29L
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($401.73) ·
SPM29L - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$13,390.86

Per 100

QTY:
Each
Add
ALR1K6 - Nsi

Power Distribution Block, 1 Primary Openings, 6 Secondary Openings, #4 Awg to 500 MCM Primary Opening Wire Size, #14 to #2/0 Awg Secondary Opening Wire Size, 380 A, 600 V, Clear Acrylic, Maximum Of +90 °C, 5.5 In Overall Length, 2.9 In Overall Width, 3.25 In Overall Height, 1.34 LB

  • MFR Part #: AL-R1-K6
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
ALR1K6 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$81.63

Each

QTY:
Each
Add
ALR2K6 - Nsi

Power Distribution Block, 2 Primary Openings, 6 Secondary Openings, #6 Awg to 500 MCM Primary Opening Wire Size, #14 to #2/0 Awg Secondary Opening Wire Size, 760 A, 600 V, Clear Acrylic, Maximum Of +90 °C, 5.5 In Overall Length, 2.9 In Overall Width, 3.25 In Overall Height, 1.49 LB

  • MFR Part #: AL-R2-K6
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($286.26) ·
ALR2K6 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$95.42

Each

QTY:
Each
Add
ESGTS20 - Nsi

Easy-Splice Gel Tap Splice Kit With Connector For #14 - 2/0 Awg The Easy-Splice Gel Tap Splice Kit Provides A Fast and Simple Method For Connecting, Insulating, and Environmentally Sealing Low-Voltage Splices. The Splice Kit Is Designed For Underground and Overhead Environments and Is Useful For Street Lighting Applications. The Splice Kit'S Dual-Rated Mechanical Connector Splices A Wide Range Of Cables, Including Copper and Aluminum. The Connector'S Four Port Design Allows Maximum Inventory Flexibility. T

MFR Part #:
ESGTS-2/0
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($153.72)
IPLD7503 - Nsi

The Polaris IPLD750-3 Multi-Tap Dual-Sided Entry Connector Features 3 Ports Sized For 750 - 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays,

MFR Part #:
IPLD750-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($543.93)
ISPB202 - Nsi

The Polaris ISPB2/0-2 Multi-Tap Direct Burial Single-Sided Entry Connector Features 2 Ports Sized For 2/0 - 14 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Single-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Rated For Temporary Submersion, Wet or Damp Locations and Direct Burial Applications. Installs With A Hex Key and Torque Wrench, W

MFR Part #:
ISPB2/0-2
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($127.44)
ISR600 - Nsi

Insulated Butt Splice, #6 Awg Conductor Size, 600 Kcmil Conductor Size, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, -45 °C (Cold) Operating Temperature, +90 °C Operating Temperature, 5.83 In Overall Length, 600 V, 1 LB

MFR Part #:
ISR-600
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
2 Each ($195.78)
L1N - Nsi

2 Hole Long Barrel Copper Compression Lug 1 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

MFR Part #:
L1N
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
50 Each ($748.42)
L750N - Nsi

2 Hole Long Barrel Copper Compression Lug 750 MCM-1/2" Bolt - 1 3/4" Mounting Hole Spacing Long Barrel Copper Compression Lugs Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

MFR Part #:
L750N
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($195.08)
PTS300 - Nsi

Solid Pin Terminal For Copper and Aluminum Conductors 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTS300
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($44.52)
SPM7L - Nsi

Service Post Connector, #1 Awg (Solid);2/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/4 In (Stud) Overall Length, 600 V Ac, 2.76 LB/Ea

MFR Part #:
SPM-7L
Manufacturer:
Nsi
Local Availability:
In Stock
Total Availability:
Pkg Sizes:
6 Each ($479.16)
3350T2 - Nsi

3 Port Aluminum Dual Rated Transformer Lug 350 MCM - 6 Awg With 2 Mounting Holes Aluminum Dual Rated Transformer Lugs Are Versatile and Reuseable Set Screw Connectors Made Of 6061T-6 Aluminum Alloy For Superior Electrical and Mechanical Performance. Two Set Screws Per Wire Hole Ensure An Exceptional Connection. Electro-Tin Plated For Low Resistance. For Use With Copper or Aluminum Conductors. Mounting Hole Spacing Is Nema 1-3/4". Meets or Exceeds Ansi C119.4 Class A. Rated 600 Volts. Temperature Rating 90

MFR Part #:
3-350T2
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($55.24)
EWDT9HD - Nsi

Easy-Wrap Heavy Duty Duct Tape 1.88 X 60

MFR Part #:
EWDT-9HD
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($19.71)
IPCS1010 - Nsi

Insulation Piercing Connector 1/0 - 8 Awg Insulation Piercing Connectors Are Made For Use With Copper-Copper, Copper to Aluminum and Aluminum to Aluminum Applications. They Are Safe to Use and Are Completely Insulated, No Need to Strip Wire. They Can Be Installed On Energized Conductors With No Contact At Any Point. No Spacer Required Between Connections. Exclusive "Turbo Spacer" Keeps Tap Side Open While Main Conductor Is Being Tightened. Watertight

MFR Part #:
IPCS1010
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
6 Each ($269.28)
IPLD2508 - Polaris

The Polaris IPLD250-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

MFR Part #:
IPLD250-8
Manufacturer:
Polaris
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($424.20)
IPLD6003 - Nsi

The Polaris IPLD600-3 Multi-Tap Dual-Sided Entry Connector Features 3 Ports Sized For 600 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays

MFR Part #:
IPLD600-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($425.13)
L156 - Nsi

1 Hole Long Barrel Copper Compression Lug 1 Awg - 5/16 Inch Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L156
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($7.04)
L838 - Nsi

1 Hole Long Barrel Copper Compression Lug 8 Awg - 3/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L838
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($3.52)
N500SP - Nsi

All Purpose Split Bolt Connector 500 MCM Is Used For Combinations Of Aluminum to Copper, Aluminum to Aluminum, Steel to Aluminum, Copper to Copper, and Steel to Copper Applications. They Have An Electro-Tinned Body. Ul Listed For Copper and Copperweld Wires Only. Includes Nut, Spacer and Pressure Pad.

MFR Part #:
N-500SP
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($243.43)
PT300 - Nsi

Stranded Bi-Metallic Pin Terminal 300 MCM Stranded Bi-Metallic Pin Terminals Is Designed to Facilitate Termination Of Aluminum Conductors. Tin-Plated Stranded Copper Pin. Connector Bores Are Coated With Oxide Inhibitor. Supplied With Epdm Insulating Cover. Ul 486B Listed. Rated 600 Volts.

MFR Part #:
PT300
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($54.76)
SPM29L - Nsi

Service Post Connector, #1 Awg (Solid);4/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 2 Conductors, +90 °C Operating Temperature, 1-1/2 In (Stud) Overall Length, 600 V Ac, 1.97 LB/Ea

MFR Part #:
SPM-29L
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($401.73)
ALR1K6 - Nsi

Power Distribution Block, 1 Primary Openings, 6 Secondary Openings, #4 Awg to 500 MCM Primary Opening Wire Size, #14 to #2/0 Awg Secondary Opening Wire Size, 380 A, 600 V, Clear Acrylic, Maximum Of +90 °C, 5.5 In Overall Length, 2.9 In Overall Width, 3.25 In Overall Height, 1.34 LB

MFR Part #:
AL-R1-K6
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($81.63)
ALR2K6 - Nsi

Power Distribution Block, 2 Primary Openings, 6 Secondary Openings, #6 Awg to 500 MCM Primary Opening Wire Size, #14 to #2/0 Awg Secondary Opening Wire Size, 760 A, 600 V, Clear Acrylic, Maximum Of +90 °C, 5.5 In Overall Length, 2.9 In Overall Width, 3.25 In Overall Height, 1.49 LB

MFR Part #:
AL-R2-K6
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
3 Each ($286.26)

Begin Live Chat