Fluorescent Ballast, Instant, 32 W, 277 V ac, 0.71 A, Non Dimmable, 3 Lamps, 9.5 in Length, 1.3 in Width, 1 in Height, 0.88 Ballast Factor, 0.98 Power Factor, 50 Hz;60 Hz, Metal Housing Material, 10 % Total Harmonic Distortion, 0.441 kg/EA

Key KT-EMRG-LED-5-500-AC-IP LED Eme

Ballast, Programmed, 26 W, 277 V ac, 0.54 A, CFQ26W/G24Q Shape, Non Dimmable, 2 Lamps, 4.98 in Length, 2.4 in Width, 1 in Height, 1 Ballast Factor, 0.98 Power Factor, 50 to 60 Hz, Metal Housing Material, 10 % Total Harmonic Distortion, 5 yr Warranty, 0.250 kg/EA

Landscape Flood Light, 50 W, Non Dimmable, 1 Lamps, 6.25 in Length, 2.75 in Width, Stainless Steel Housing Material, 1 yr Warranty

Reliable performance. Vacuum-pressure impregnation is used to re-enforce the electrical insulation of the ballast, preclude moisture, inhibit noise, and dissipate heat. Pre-insulated voltage leads reduce the risk of shock and shrink installation time. The basic ballast is the open core and coil which is most often used as a component within a lighting luminaire. The core and coil also forms the nucleus of Philips Advance's five other ballast configurations. Vacuum-pressure impregnated with a silica-filled

The right fit for your high-output applications. Programmed Start Operation - Helps to extend lamp life in frequent switching applications such as occupancy sensors or daylight harvesting. Starting Capability at -20F - Suited for cold temperature applications (54W models only). High-Low Switching - One ballast can easily switch from 4-lamp to 2-lamp fixtures. No matter what the conditions require, operating at a variety of line voltages between 120V to 480V, whether located in high ambient temperature envi

The right fit for your high-output applications. Programmed Start Operation - Helps to extend lamp life in frequent switching applications such as occupancy sensors or daylight harvesting. Starting Capability at -20F - Suited for cold temperature applications (54W models only). High-Low Switching - One ballast can easily switch from 4-lamp to 2-lamp fixtures. No matter what the conditions require, operating at a variety of line voltages between 120V to 480V, whether located in high ambient temperature envi

LED Power Supply, 60 W, 120 V ac, 24 V ac, Dimmable, 6-1/2 in Length, 1-5/8 in Width, 1-1/4 in Height, 0.25 lb

Fluorescent Ballast, Instant, 32 W, 120 V/277 V, Non Dimmable, 4 Lamps, 9.5 in Length, 1.7 in Width, 1.18 in Height, 0.95;0.84;0.87;0.77;0.77 Ballast Factor, 0.99;0.91;0.94 Power Factor, 50 Hz;60 Hz, 13 % (120 V);19 % (277 V) Total Harmonic Distortion, -22 °F Starting Temperature, 1.40 lb/EA