Narrow By:

• Category: Conduit Fittings & Accessories

• Product Type

  

  • 1 1/2 Al SQ Head PLG (1)
  • 1 1/2 GRND Bush 105C Insul 4-14 Al Lug (1)
  • 1 1/2 Inch Ground Bushing Alu (1)
  • 1 1/2 to 1 1/4 Al Reducing Bush (1)
  • 1 1/2" Plastic Bushing (1)
  • 1 1/4 Al Recessed Head PLG (1)
  • 1 1/4 Al SQ Head PLG (1)
  • 1 1/4 Recessed Head PLG (1)
  • 1 1/4 RGD 1 1/2 Emt Hanger With Bolt (1)
  • 1 1/4 to 1 Al Reducing Bush (1)
  • 1 1/4 to 3/4 Al Reducing Bush (1)
  • 1 Al SQ Head PLG (1)
  • 1 CND Exp JNT Int GRD Max CND MVT 4 (1)
  • 1 GRND Bush 105C Insul 4 to 14 Al Lug (1)
  • 1 In GNDG BSHG THD (1)
  • 1 LRG 1/2 SM Reducing Adpt (1)
  • 1 LRG 3/4 SM Reducing Adpt (1)
  • 1 SS316 CNTR Sunk HX PLG (1)
  • 1 SS316 GRD BSHG (1)
  • 1 Threaded Bushing Non Insulated (1)
  • 1 Union Connector Type Unf (1)
  • 1" 1X1/2 Reduc Bushng STL NPS (1)
  • 1" 1X1/2 Reduc Washer STL (1)
  • 1" 1X3/4 Reduc Bushng STL NPS (1)
  • 1" 1X3/4 Reduc Washer STL (1)
  • 1" Cond Locknut STL Ul (1)
  • 1" Non-Metallic Split Bush (1)
  • 1" Plastic Bushing, 150C (1)
  • 1" Sealing Locknut STL (1)
  • 1" Snap In Blank (1)
  • 1" SPLT GND BSH Lug 4-14 Awg (1)
  • 1" SS316 GRD Hub (1)
  • 1" Steel Grounding Locknut (1)
  • 1/2 Al SQ Head PLG (1)
  • 1/2 In THRD Inslg BSHG (1)
  • 1/2 RGD SS Throat Bush Insul 4-14 Al Lug (1)
  • 1/2 RT Ang Cond CLMP Galv (1)
  • 1/2 SQ Head PLG (1)
  • 1/2 SS316 SQ WSH (1)
  • 1/2" Cond Locknut STL Ul (1)
  • 1/2" Plastic Bushing, 150C (1)
  • 1/2" Sealing Locknut (2)
  • 1/2" Sealing Locknut STL (1)
  • 1/2" Spacing Connector (1)
  • 1/2" Steel Grounding Locknut (1)
  • 1-1/2 In GNDG BSHG THD (1)
  • 1-1/2 or 2-1/8INBOX SPRT PLSTC (1)
  • 1-1/2 Snap In Blank (1)
  • 1-1/2 X 3/4 SS316 Face BSH (1)
  • 1-1/2" 1-1/2X1 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X1 Reduc Washer STL (1)
  • 1-1/2" 1-1/2X1/2 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X1/2 Reduc Washer STL (1)
  • 1-1/2" 1-1/2X1-1/4 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X1-1/4 Reduc Washer STL (1)
  • 1-1/2" 1-1/2X3/4 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X3/4 Reduc Washer STL (1)
  • 1-1/2" Cond Locknut STL Ul (1)
  • 1-1/2" GRND BSH STL THRD #14-4 Al Ins (1)
  • 1-1/2" Non-Metallic Split Bush (1)
  • 1-1/2" Sealing Locknut (1)
  • 1-1/2" Sealing Locknut STL (1)
  • 1-1/2" SPLT GND BSH #14-1/0awg (1)
  • 1-1/2" SPLT GND BSH #4-14 Awg (1)
  • 1-1/2" SS316 Hub (1)
  • 1-1/2" to 3/4" Reducing Bushing (1)
  • 1-1/4 In THRD Inslg BSHG (1)
  • 1-1/4" 1-1/4X1 Reduc Bushng STL NPS (1)
  • 1-1/4" 1-1/4X1 Reduc Washer STL (1)
  • 1-1/4" 1-1/4X1/2 Reduc Bushng STL NPS (1)
  • 1-1/4" 1-1/4X1/2 Reduc Washer STL (1)
  • 1-1/4" 1-1/4X3/4 Reduc Bushng STL NPS (1)
  • 1-1/4" 1-1/4X3/4 Reduc Washer STL (1)
  • 1-1/4" Cond Locknut STL Ul (1)
  • 1-1/4" Non-Metallic Split Bush (1)
  • 1-1/4" Sealing Locknut (1)
  • 1-1/4" Sealing Locknut STL (1)
  • 1-1/4'" Snap In Blank (1)
  • 1-1/4" SPLT GND BSH #14-1/0awg (1)
  • 18 X 1-1/2 Nail Plate PG (1)
  • 1IN GRND Bush 14-2/0WIRE Range Al (1)
  • 2 1/2 Al SQ Head PLG (1)
  • 2 1/2 Recessed Head PLG (1)
  • 2 1/2 to 1 Reducing Bush (1)
  • 2 1/2 to 2 Al Reducing Bush (1)
  • 2 Al Recessed Head PLG (1)
  • 2 Al SQ Head PLG (1)
  • 2 GRND Bush 105C Insul 1 to 8 Copp Lug (1)
  • 2 GRND Bush 105C Insul 4 to 14 Al Lug (1)
  • 2 GRND. Bush. Ins. 14-1/0 Mall (1)
  • 2 In GNDG BSHG THD (1)
  • 2 SQ Head PLG (1)
  • 2 SS316 FLX Conn Male 90 (1)
  • 2 to 1 1/4 Al Reducing Bush (1)
  • 2 to 1/2 Al Reducing Bush (1)
  • 2 X 1-1/2 SS316 Face BSH (1)
  • 2" 2X1 Reduc Bushng STL NPS (1)
  • 2" 2X1 Reduc Washer STL (1)
  • 2" 2X1/2" Reduc Bushng STL NPS (1)
  • 2" 2X1/2" Reduc Washer STL (1)
  • 2" 2X1-1/2" Reduc Bushng STL NPS (1)
  • 2" 2X1-1/2" Reduc Washer STL (1)
  • 2" 2X1-1/4 Reduc Bushng STL NPS (1)
  • 2" 2X1-1/4 Reduc Washer STL (1)
  • 2" Cond Locknut STL Ul (1)
  • 2" Non-Insulated Threaded Bushing (1)
  • 2" Non-Metallic Split Bush (1)
  • 2" Plastic Bushing 150 C (1)
  • 2" Sealing Locknut STL (1)
  • 2" Snap In Blank (1)
  • 2" to 1-1/4" Reducing Bushing (1)
  • 2-1/2 In Combo A&BB BSHG (1)
  • 2-1/2 SPLT GND BSH W/LG 14-1/0 (1)
  • 2-1/2" 2-1/2X1 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X1 Reduc Washer STL (1)
  • 2-1/2" 2-1/2X1-1/2 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X1-1/2 Reduc Washer STL (1)
  • 2-1/2" 2-1/2X1-1/4 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X1-1/4 Reduc Washer STL (1)
  • 2-1/2" 2-1/2X2 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X2 Reduc Washer STL (1)
  • 2-1/2" 2-1/2X3/4 Reduc Washer STL (1)
  • 2-1/2" Beam Clamp (1)
  • 2-1/2" Cond STL Locknuts (1)
  • 2-1/2" Non-Metallic Split Bush (1)
  • 2-1/2" Offset Nipple (1)
  • 2-1/2" Plastic Bushing 150C (1)
  • 2-1/2" Sealing Locknut STL (1)
  • 2-1/2"GR.Bush.Lay-Inlg (1)
  • 2-1/5" 2X3/4 Reduc Washer STL (1)
  • 3 1/2 GRND. Bush. Ins. (1)
  • 3 1/2 In Emt CMP CPL Raintight (1)
  • 3 1/2 Recessed Head PLG (1)
  • 3 1/2 RGD 3 1/2 Emt Hanger With Bolt (1)
  • 3 1/2 to 3 Reducing Bush (1)
  • 3 In THRD Inslg BSHG (1)
  • 3 RGD 3 Emt Hanger With Bolt (1)
  • 3 to 1 Reducing Bush (1)
  • 3 to 2 1/2 Al Reducing Bush (1)
  • 3 to 2 Al Reducing Bush (1)
  • 3" 3X1 Reduc Washer STL (1)
  • 3" 3X1-1/2 Reduc Bushng STL NPS (1)
  • 3" 3X1-1/2 Reduc Washer STL (1)
  • 3" 3X1-1/4 Reduc Washer STL (1)
  • 3" 3X2 Reduc Bushng STL NPS (1)
  • 3" 3X2 Reduc Washer STL (1)
  • 3" 3X2-1/2 Reduc Bushng STL NPS (1)
  • 3" 3X2-1/2 Reduc Washer STL (1)
  • 3" Cond STL Locknuts (1)
  • 3" GRND.Bush.Ins.14-1/0 Mall (1)
  • 3" NM Cap (1)
  • 3" Plastic Bushing 150 C (1)
  • 3" Sealing Locknut STL (1)
  • 3" SPLT GND BSH #6-250MCM (1)
  • 3" SPLT GND BSH W/Lug #14-1/0 (1)
  • 3" to 1-1/2" Reducing Bushing (1)
  • 3/4 -1/2 Reducing Washer, RGD/Imc, ST (1)
  • 3/4 Al SQ Head PLG (1)
  • 3/4 In THRD Inslg BSHG (1)
  • 3/4 Inch Nylon Insuliner Sleeve (1)
  • 3/4 SQ Head PLG (1)
  • 3/4 SS316 Drain PLG (1)
  • 3/4 to 1/2IN Female Reducer Iron (1)
  • 3/4" 3/4X1/2 Reduc Bushng STL NPS (1)
  • 3/4" 3/4X1/2 Reduc Washer STL (1)
  • 3/4" Box Support (1)
  • 3/4" Cond Locknut STL Ul (1)
  • 3/4" Extra Long Conduit Nipple (1)
  • 3/4" Plastic Bushing, 150C (1)
  • 3/4" Sealing Locknut STL (1)
  • 3/4" SPLT GND BSH Lug 4-14 Awg (1)
  • 3/8 & 1/2 RGD 1/2 Emt Hanger With Bolt (1)
  • 3-1/2 to 2-1/2" Reduc WSHR (1)
  • 3-1/2" Cond STL Locknuts Non (1)
  • 3-1/2" NM Bushing (1)
  • 3-1/2"3-1/2X1-1/2 Reduc Washer STL (1)
  • 3-1/2"3-1/2X1-1/4 Reduc Washer STL (1)
  • 3-1/2"3-1/2X2 Reduc Washer STL (1)
  • 3-1/2"3-1/2X2-1/2 Reduc Bushng STL NPS (1)
  • 3-1/2"3-1/2X2-1/2 Reduc Washer STL (1)
  • 3-1/2"3-1/2X3 Reduc Bushng STL NPS (1)
  • 3-1/2"3-1/2X3 Reduc Washer STL (1)
  • 3-1/2"GR.Bush.Lay-Inlg (1)
  • 3-1/2"Sealing Locknut STL (1)
  • 3-1/2INCH Ground Bushing Alu (1)
  • 3IN GRND Bush 14-2/0WIRE Range Al (1)
  • 4 Emt CMP CPL Raintight (1)
  • 4 Recessed Head PLG (1)
  • 4 RGD 4 Emt Hanger With Bolt (1)
  • 4 to 2 1/2 Reducing Bush (1)
  • 4 to 2-1/2" Reduc WSHR (1)
  • 4 to 3 Al Reducing Bush (1)
  • 4" 4X1/2 Reduc Washer STL (1)
  • 4" 4X2 Reduc Washer STL (1)
  • 4" 4X2-1/2 Reduc Bushng STL NPS (1)
  • 4" 4X2-1/2 Reduc Washer STL (1)
  • 4" 4X3 Reduc Bushng STL NPS (1)
  • 4" 4X3-1/2 Reduc Bushng STL NPS (1)
  • 4" 4X3-1/2 Reduc Washer STL (1)
  • 4" NM Cap (1)
  • 4" Non-Insulated Threaded Bushing (1)
  • 4" Plastic Bushing 150 C (1)
  • 4" Sealing Locknut STL (1)
  • 4" Steel Grounding Locknut (1)
  • 4.04" 4X3/4" Reduc Washer STL (1)
  • 4IN GRND Bush 14-2/0WIRE Range Al (1)
  • 6 X 1-1/2 Nail Plate PG (1)
  • Anti-Short Bushing 1/2 (1)
  • Anti-Short Bushing 5/16 (1)
  • Bolt (5)
  • Box Support (1)
  • Channel Bar (1)
  • Commercial Fittings (5)
  • Conduit Hub Swing 1" (1)
  • Conduit Strap (1)
  • Emt Insulating Bushing (14)
  • Grounding Bushing (14)
  • Hub (2)
  • Insulated Grounding Bushing (10)
  • Insulating Bushing (11)
  • Knockout Bushing (1)
  • Locknut (13)
  • Multi-Function Clip, Wire Rod F (1)
  • Plastic Bushing (11)
  • Plastic Stud Bushing 1000 (1)
  • Plug (15)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (2)
  • RDC Bush Mall 2-1/2TO2 In NPT (1)
  • RDC Bush Mall 3 to 2 In NPT (1)
  • RDC Bush Mall 3-1/2TO2-1/2 In (1)
  • RDC Bush Mall 3TO2-1/2 In NPT (1)
  • RDC Bush Mall 4TO3 In NPT (1)
  • RDC Bush STL 1 to 3/4 In NPT (1)
  • RDC Bush STL 2TO1-1/2 In NPT (1)
  • RDC Bush STL 2TO1-1/4 In NPT (1)
  • Reducer Bushing (10)
  • Reducing Adapter (1)
  • Reducing Bushing (40)
  • Reducing Coupling (1)
  • Reducing Washer (23)
  • Rigid Conduit Capped Bushing (2)
  • Rigid Conduit Lock Nut (1)
  • Rigid Conduit Nipple (4)
  • Rigid Conduit Reducing Bushing (4)
  • Snap-In Bushing (6)
  • Stronghold™ PK8 Conduit Clip (1)
  • Universal Stud Bushing (1)
  • Universal Stud Bushing 500 (1)
  • Wedge Grip, 2/0-4/0 Acsr, 2/0- (1)
  • Wedge Grip, 4-1/0 Acsr, 1-2/0 (1)
  • Show More...

• Brand

  

  • Adalet-PLM (3)
  • American Fittings Corp (79)
  • Amfico (9)
  • Appleton (53)
  • Appleton/Oz Gedney (1)
  • APPOZGCOMM (1)
  • ARLINGTON (23)
  • Arlington Industries (29)
  • Blackclaw (1)
  • Bridgeport (141)
  • Bridgeport Fittings (34)
  • CALBRITE (16)
  • Calpipe Industries, Inc (2)
  • Carlon(R) (1)
  • CULLY (2)
  • Eaton (87)
  • EATON CROUSE-HINDS SERIES (61)
  • KILLARK (28)
  • LH DOTTIE (3)
  • NSi (2)
  • nVent CADDY (2)
  • O-Z/GEDNEY (38)
  • PANDUIT (1)
  • Patriot Aluminum (4)
  • Patriot Industries (1)
  • Peco Fasteners (1)
  • PLASTIBOND (24)
  • RACO (7)
  • Southwire (1)
  • Southwire Rough Electrical Com (6)
  • Star Teck (1)
  • Steel City (4)
  • T&B Ind Fitting (25)
  • Thomas & Betts (1)
  • Show More...

• Trade Size

  

  • 0.375 (1)
  • 0.5 (4)
  • 0.75 (6)
  • 0.975 x 0.975 x 2.22 (1)
  • 1 (16)
  • 1 in (8)
  • 1 INCH (3)
  • 1 to 1/2 in (4)
  • 1 to 3/4 in (3)
  • 1 x 3/4 in (1)
  • 1.25 (9)
  • 1.5 (10)
  • 1/2 (6)
  • 1/2 in (15)
  • 1/2 INCH (1)
  • 1/2 to 3/4 in (1)
  • -1/4 - 1/2 (1)
  • 1/4 in (1)
  • 1-1/2 (3)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 in (5)
  • 1-1/2 INCH (2)
  • 1-1/2 to 1 in (3)
  • 1-1/2 to 1/2 in (2)
  • 1-1/2 to 1-1/4 in (3)
  • 1-1/2 to 3/4 in (3)
  • 1-1/4 (2)
  • 1-1/4 in (3)
  • 1-1/4 INCH (1)
  • 1-1/4 to 1 in (3)
  • 1-1/4 to 1/2 in (2)
  • 1-1/4 to 3 (1)
  • 1-1/4 to 3/4 in (3)
  • 2 (8)
  • 2 Conduit (1)
  • 2 in (8)
  • 2 INCH (6)
  • 2 to 1 in (3)
  • 2 to 1/2 in (2)
  • 2 to 1-1/2 in (3)
  • 2 to 1-1/4 in (3)
  • 2 to 3/4 in (3)
  • 2 to 4 in (1)
  • 2 x 1-1/2 in (1)
  • 2 x 4 Stud Size (1)
  • 2.5 (11)
  • 2;53 (1)
  • 2-1/2 (3)
  • 2-1/2 IN (3)
  • 2-1/2 to 1-1/2 in (1)
  • 2-1/2 to 1-1/4 in (1)
  • 2-1/2 to 2 in (3)
  • 3 (15)
  • 3 1/2 - 3 (1)
  • 3 in (5)
  • 3 INCH (1)
  • 3 pipe (1)
  • 3 to 1-1/2 in (1)
  • 3 to 1-1/4 in (1)
  • 3 to 2 in (2)
  • 3 to 2-1/2 in (3)
  • 3 to 4 in (2)
  • 3.5 (3)
  • 3/4 (5)
  • 3/4 in (16)
  • 3/4 in EMT to 3/4 in Flex (1)
  • 3/4 INCH (1)
  • 3/4 to 1/2 in (4)
  • 3-1/2 (1)
  • 3-1/2 in (4)
  • 3-1/2 INCH (2)
  • 3-1/2 to 3 in (1)
  • 4 (13)
  • 4 - 3-1/2 (1)
  • 4 in (2)
  • 5 (2)
  • 5 pipe (1)
  • 5/16 (1)
  • 6 (1)
  • 7/16 (1)
  • Large End: 3/4 in;Small End: 1/2 in (1)
  • Show More...

• Model

  

  • FB812M (1)
  • GLL (9)
  • KO (1)
  • METERING CABINET, FORMED STEEL MATERIAL; ANSI/ASA 61 GRAY COLOR; 30 INCH; 30 WIDTH IN INCH; 30 INCH; 30 HEIGHT IN INCH; 10 INCH; 10 DEPTH IN INCH; 762 HEIGHT IN MM; 762 WIDTH IN MM; CSA APPROVAL; 254 DEPTH IN MM; INDOOR METERING APPLICATION (1)
  • PBGLL (4)
  • PBPS (1)
  • PET (1)
  • PLG (8)
  • PV (2)
  • RB (2)
  • RE (29)
  • REA (1)
  • REC (1)
  • RWN (1)
  • Show More...

• Shape

  

  • Round (66)
  • Straight (2)
  • Show More...

• Connection Size

  

  • 1/2 in (1)
  • Large End: 3/4 in;Small End: 1/2 in (1)
  • Show More...

• Connection Type

  

  • Male to Female (1)
  • NPT (2)
  • Rigid (8)
  • Snap-In (8)
  • Threaded (38)
  • Show More...

• Thread Length

  

  • 1/2 in (6)
  • 1-1/8 in (2)
  • 5/8 in (5)
  • 7/16 in (2)
  • Show More...

• Cable Size

  

  • #14 to 1/0 AWG (7)
  • #14 to 4 AWG (9)
  • #6 to 3/0 AWG (1)
  • #8 to 1/0 AWG (2)
  • .250 (1)
  • .375 (1)
  • 0.525 to 0.650 in (1)
  • 3/4 IN Rigid And EMT (1)
  • Show More...

• Hub Size

  

  • 1 in (1)
  • 1" to 1/2" (2)
  • 1" to 3/4" (2)
  • 1/2 in (1)
  • 1/2 in (Male);3/4 in (Female) (1)
  • 1/2 to 3/4 in (1)
  • 1/2 x 3/4 in (1)
  • 1-1/2" (1)
  • 1-1/2" to 1" (2)
  • 1-1/2" to 1/2" (2)
  • 1-1/2" to 1-1/4" (1)
  • 1-1/2" to 3/4" (2)
  • 1-1/4" to 1" (2)
  • 1-1/4" to 1/2" (1)
  • 1-1/4" to 3/4" (1)
  • 2" to 1" (2)
  • 2" to 1/2" (2)
  • 2" to 1-1/2" (2)
  • 2" to 1-1/4" (1)
  • 2" to 3/4" (1)
  • 3" to 1-1/2" (1)
  • 3" to 2" (1)
  • 3/4 in (1)
  • 3/4" to 1/2" (2)
  • Show More...

• Length

  

  • 0.31 in (1)
  • 0.505 in (5)
  • 0.558 in (1)
  • 0.563 in (1)
  • 0.652 (1)
  • 0.74 in (1)
  • 0.743 in (1)
  • 0.84 (2)
  • 0.945 in (1)
  • 0.99 (1)
  • 1 (9)
  • 1.02 (1)
  • 1.05 (1)
  • 1.05 in (2)
  • 1.056 (1)
  • 1.13 in (1)
  • 1.240 in (1)
  • 1.25 (1)
  • 1.278 (1)
  • 1.29 in (1)
  • 1.32 (4)
  • 1.440 in (1)
  • 1.554 (1)
  • 1.6 (1)
  • 1.64 (1)
  • 1.66 (1)
  • 1.66 in (2)
  • 1.72 (1)
  • 1.761 (1)
  • 1.763 (1)
  • 1.77 (1)
  • 1.797 (1)
  • 1.83 in (1)
  • 1.870 in (1)
  • 1.9 (3)
  • 1.9 in (4)
  • 1.915 (1)
  • 12 (1)
  • 1-3/8 (1)
  • 18" (1)
  • 2 (2)
  • 2.07 (1)
  • 2.08 (1)
  • 2.109 (1)
  • 2.240 in (1)
  • 2.327 (1)
  • 2.35 (1)
  • 2.375 in (5)
  • 2.38 (8)
  • 2.384 (1)
  • 2.56 INCH (1)
  • 2.725 in (1)
  • 2.734 (1)
  • 2.875 in (1)
  • 3.062 (1)
  • 3.065 (1)
  • 3.13 (1)
  • 3.28 (1)
  • 3.340 in (1)
  • 3.5 in (4)
  • 3.604 (1)
  • 3.67 (1)
  • 3.69 (1)
  • 3.695 (1)
  • 3.765 in (1)
  • 3.88 (1)
  • 4 (1)
  • 4.008 (1)
  • 4.311 (1)
  • 4.32 (1)
  • 4.5 in (1)
  • 4.652 (1)
  • 4.81 (1)
  • 4.812 (1)
  • 4.815 (1)
  • 5.751 (2)
  • 5.783 (1)
  • 6" (1)
  • 6.282 (1)
  • Strip: 1-1/4 in;Body: 2.530 in (1)
  • Show More...

• Width

  

  • 0.37 in (1)
  • 0.525 in (1)
  • 0.537 in (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.635 in (1)
  • 0.84 in (1)
  • 0.87 (1)
  • 0.94 (1)
  • 0.953 in (1)
  • 1 in (1)
  • 1.05 (1)
  • 1.056 in (1)
  • 1.125 (1)
  • 1.140 in (1)
  • 1.18 (1)
  • 1.205 in (1)
  • 1.21 in (1)
  • 1.218 in (1)
  • 1.23 in (1)
  • 1.235 in (1)
  • 1.24 in (1)
  • 1.278 in (1)
  • 1.32 (4)
  • 1.420 in (1)
  • 1.441 (1)
  • 1.468 in (1)
  • 1.6 (1)
  • 1.770 in (1)
  • 1.875 in (1)
  • 1.88 (1)
  • 1.9 (3)
  • 1.995 (1)
  • 1.997 (1)
  • 1/2 in (2)
  • 1/4 in (1)
  • 1/8 in (2)
  • 11/16 in (1)
  • 1-1/2" (2)
  • 1-1/4 in (1)
  • 1-15/16 in (1)
  • 13/16 in (4)
  • 1-9/16 in (1)
  • 2 (9)
  • 2.125 in (1)
  • 2.2 (1)
  • 2.281 in (1)
  • 2.327 in (1)
  • 2.38 (8)
  • 2.5 in (1)
  • 2.598 in (1)
  • 2.656 in (1)
  • 2.75 (1)
  • 2.8 (1)
  • 2.890 (1)
  • 2.919 in (1)
  • 2-11/16 in (1)
  • 2-3/16 in (1)
  • 3.065 in (1)
  • 3.21 (1)
  • 3.52 (1)
  • 3/16 in (8)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 4 (3)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 7/16 in (1)
  • 7/32 in (1)
  • 9/16 in (1)
  • 9/64 in (1)
  • NA (1)
  • Show More...

• Height

  

  • 0.1 (1)
  • 0.13 (1)
  • 0.22 (1)
  • 0.230 (1)
  • 0.250 (1)
  • 0.37 in;9.4 mm (1)
  • 0.4 (1)
  • 0.45 (1)
  • 0.453 in (5)
  • 0.505 (1)
  • 0.52 (1)
  • 0.52 Inch (1)
  • 0.531 (1)
  • 0.568 (1)
  • 0.59 Inch (1)
  • 0.605 (1)
  • 0.614 (1)
  • 0.625 (1)
  • 0.627 (1)
  • 0.63 (1)
  • 0.675 (1)
  • 0.688 in (2)
  • 0.718 in (1)
  • 0.75 in (1)
  • 0.81 (6)
  • 0.813 in (2)
  • 0.815 (1)
  • 0.82 (1)
  • 0.83 (3)
  • 0.85 Inch (1)
  • 0.875 in (1)
  • 0.99 (3)
  • 1 in (2)
  • 1.01 (2)
  • 1.03 (2)
  • 1.140 in (1)
  • 1.225 (2)
  • 1.23 (3)
  • 1.233 (1)
  • 1.235 in (1)
  • 1.24 (1)
  • 1.27 in;32.3 mm (1)
  • 1.42 in (1)
  • 1.770 in (1)
  • 1.81 in;45.97 mm (1)
  • 1/2 in (4)
  • 1-1/16 INCH (2)
  • 1-3/8 in (2)
  • 2 (9)
  • 2.07 (1)
  • 2.08 (1)
  • 2.281 in (1)
  • 2.598 in (1)
  • 2.919 in (1)
  • 3/4 in (9)
  • 3/8 in (2)
  • 4 (2)
  • 4.5 (1)
  • 5.751 in (1)
  • 5/8 in (2)
  • 6.9 in (1)
  • 7/8 in (5)
  • 9/16 in (1)
  • Show More...

• Diameter

  

  • 0.70 in;17.8 mm (1)
  • 0.88 in;22.4 mm (Inside);1.75 in;44.5 mm (Outside) (1)
  • 1 in (2)
  • 1 in (Inside);1-1/2 in (Outside) (1)
  • 1 in (Inside);1-11/16 in (Outside) (1)
  • 1 in (Inside);2-3/16 in (Outside) (1)
  • 1.03 in;26.2 mm (1)
  • 1.063 in (1)
  • 1.25 in (1)
  • 1.4 in (1)
  • 1.625 in (1)
  • 1.630 in;41.40 mm (1)
  • 1-1/16 in (1)
  • 1-1/16 in (Inside);1-3/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-1/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-1/16 in (Inside);3-1/4 in (Outside) (1)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 1-1/8 in (3)
  • 1-11/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-11/16 in (Inside);3-1/4 in (Outside) (2)
  • 1-13/16 in (1)
  • 1-15/16 in (1)
  • 1-15/16 in (Inside);2-7/8 in (Outside) (1)
  • 1-3/16 in (1)
  • 13/16 in (Inside);1-1/2 in (Outside) (1)
  • 13/16 in (Inside);1-1/8 in (Outside) (1)
  • 13/16 in (Inside);1-11/16 in (Outside) (1)
  • 13/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-3/4 in (1)
  • 1-3/8 in (2)
  • 1-3/8 in (Inside);2-1/4 in (Outside) (1)
  • 1-3/8 in (Inside);2-5/8 in (Outside) (1)
  • 1-3/8 in (Inside);3-1/4 in (Outside) (1)
  • 1-5/16 in (1)
  • 1-5/16 in (Inside);1-11/16 in (Outside) (1)
  • 1-5/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-7/8 in (2)
  • 1-9/16 in (2)
  • 1-9/16 in (Inside);2-3/16 in (Outside) (1)
  • 2 in (2)
  • 2 in (Inside);3-1/4 in (Outside) (2)
  • 2 in;50.80 mm (1)
  • 2.093 Inch (1)
  • 2.125 in (1)
  • 2.21 in (1)
  • 2.313 in (1)
  • 2.68 Inch (1)
  • 2.75 in (1)
  • 2.95 Inch (1)
  • 2-1/16 in (1)
  • 2-1/2 in (Inside);4-1/2 in (Outside) (2)
  • 2-1/2 in (Inside);5-1/2 in (Outside) (1)
  • 2-1/8 in (2)
  • 2-11/16 in (2)
  • 2-15/16 in (1)
  • 2-15/16 in (Inside);4-1/2 in (Outside) (1)
  • 2-3/16 in (1)
  • 2-3/8 in (1)
  • 2-5/16 in (Inside);3-1/2 in (Outside) (1)
  • 2-5/8 in (2)
  • 2-7/8 in (2)
  • 3.313 in (1)
  • 3.855 Inch (1)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 3-3/16 in (2)
  • 3-9/16 in (Inside);5-1/2 in (Outside) (1)
  • 4 in (1)
  • 4.5 INCH (1)
  • 4-1/8 in (1)
  • 4-13/16 in (2)
  • 4-3/8 INCH (2)
  • 4-5/16 in (2)
  • 4-5/8 in (1)
  • 5/8 in (Inside);1-1/8 in (Outside) (1)
  • 5/8 in (Inside);2-3/16 in (Outside) (1)
  • 5/8 in (Inside);7/8 in (Outside) (1)
  • 5-1/4 in (1)
  • 7/8 in (Inside);1-1/2 in (Outside) (1)
  • 7/8 in (Inside);1-3/4 in (Outside) (1)
  • 7/8 in (Inside);2-1/4 in (Outside) (1)
  • 7/8 in (Inside);2-5/8 in (Outside) (1)
  • 7/8 in (Inside);3-1/4 in (Outside) (1)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 2 Group A B, Class II Div 1 Group E F G, Class II Div 2 Group F G, Class III (1)
  • Class I Div 1 and 2 Group A B (27)
  • Class I Div 1 and 2 Group A B C D, Class Ii Div 1 Group E F G, Class Ii Div 2 Group F G, Class Iii (1)
  • Class I Div 1 and 2 Group B (3)
  • Class I Group A B (1)
  • NEMA 3/4/7c/7d/9e/9f/9g;Class I Div 1 and 2 Group C D;Class II Div 1 Group E F G Div 2 Group F G;Class III (1)
  • Show More...

• For Use With

  

  • 3/4 in Knockout (1)
  • Box;Enclosure (30)
  • Electrical;Telecommunications Cable (6)
  • EMT and Rigid Conduits (1)
  • EMT Conduit (14)
  • EMT Conduit;Boxes and Enclosures (1)
  • Fasten Threaded Connectors/Nipples to Box/Enclosure (1)
  • Fasten Threaded Rigid/IMC Conduit to Box/Enclosure (10)
  • Knockout (5)
  • Locknut;Box or Connector (10)
  • Punched Panel Holes;Knockout (1)
  • Rigid and IMC Conduit (20)
  • Rigid Conduit (2)
  • Rigid Conduit;IMC Conduit (2)
  • Rigid Service Entrance Conduit to Box or Enclosure (1)
  • Rigid/Imc Conduit (1)
  • Rigid/IMC Conduit;Solar and other Outdoor Installations (1)
  • Sheet Metal Box and Enclosure/Cabinet (1)
  • Terminate Service Conduit to Cabinet (10)
  • Threaded Conduit Hub (8)
  • Threaded Heavy Wall Conduit (21)
  • Threaded Heavy Wall Conduit Systems (3)
  • Threaded Rigid/IMC Conduit to Provide a Means of Grounding Conduit Through (9)
  • Show More...

• Sub Brand

  

  • CADDY (1)
  • Neer(TM) (1)
  • Ocal (1)
  • Pentair (1)
  • Star Teck(R) (1)
  • Show More...

• Special Features

  

  • 1 1/4 To 3IN Mast Size, 2.25IN Lag Bolt (1)
  • 1 Hub Size - 10 SOL - 3/0 STR (1)
  • 1.03 IN Dia X 0.37 IN Thick, For Threaded Conduit/Connector (1)
  • 1.62 IN Dia X 0.71 IN Length, For Rigid Conduit And IMC (1)
  • 1.62 IN Dia X 0.82 IN Length, For Rigid Conduit And IMC (1)
  • 1.75IN Width X 0.4IN Depth (1)
  • 1/2 Hub Size - 10 SOL - 2/0 STR (1)
  • 1-13/16 In Diameter X 2-7/16 In Length (1)
  • 3-5/8" steel studs 1-1/2" or 2-1/8" Boxes (1)
  • 4 In Width X 1-1/4 In Depth X 2-5/8 In Height (1)
  • 4 Teeth (1)
  • 6 Holes (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation;UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Expansion unions compensate for expansion and contraction of conduit;Explosionproof, dust-ignitionproof;Internal phosphor bronze bonding jumper ring assures positive ground between telescoping cylinders;One-piece design eliminates need for disassembly during installation;Small external diameters excellent in restricted areas in wiring of pumps, motors and other equipment;Smooth, rounded integral bushing in each hub protects co (3)
  • Allows easy insertion of grounding conductor for through or end connection;Copper conductor only for #14-4 lug;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechan (4)
  • Allows easy insertion of grounding conductor for through or end connection;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechanical vibration;Provides voltage grad (1)
  • An insulating coupling with a substantial center shoulder to prevent butting of conduit sections, ensuring a definite break in the metallic path;Dielectric strength of 220 V/MIL;Recommended for use where high strength or resistance to moisture or acid conditions is required;Temperature rating 150 DEG C;Will not melt, soften or burn (1)
  • Black Color, rated 150 degree C. (9)
  • Bonded with neoprene gasket (2)
  • Can be used with a locknut to terminate conduit at an enclosure;Fasten and ground threaded rigid, IMC metal conduit to an enclosure, copper or aluminum conductors;Insulating liner material is self-extinguishing;Lug used to connect bonding jumper to a neutral bus bar;Lugs not sold separately;Provides a compact means of grounding conduit through an insulated bushing;The plastic liner is tough, It resists corrosion, chemicals and temperature extremes, surface friction is so low that wires can be pulled with v (3)
  • Clean Tapered Thread (8)
  • Comes with Carriage Bolt and Nut (1)
  • Concrete Tight, Raintight (2)
  • Concrete-Tight;Raintight (1)
  • Conduit & Fitting Locknut (1)
  • Conduit and Fitting Locknut (1)
  • Corrosion Resistant (9)
  • Dual rated CU-AL C-clamp grounding lug (8)
  • Eliminates Conduit Rattling;Provides a Quick Means of Support for Horizontal Runs of Rigid, EMT, MC/AC or ENT Through Metal Stud;Installs with Screw Gun (1)
  • Especially Suited for use with Flexible Metallic Conduit (1)
  • Explosionproof;Dust Ignitionproof (5)
  • Features: Bolts and Nuts Attached (1)
  • Features: High Strength, Used with Rigid/IMC Conduit (2)
  • Features: Reusable (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 1-1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 3/4 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 3/4 IN (1)
  • For Rigid and IMC Conduit (19)
  • Galvanized (1)
  • Grounding Bushings & Accessories (2)
  • Grounding Lug Wire Capacity # 14 - #4 (4)
  • Grounding Lug Wire Capacity # 4 - #1/0 (3)
  • Grounding Lug Wire Capacity # 6 - #250 (1)
  • Grounding Lug Wire Capacity # 6 - 250 MCM (1)
  • Grounding Lug Wire Capacity #14 - #1/0 (2)
  • Grounding Lug Wire Capacity #14 - #1/0;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (7)
  • Grounding Lug Wire Capacity #14 - #4;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (3)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • Hardened Steel, Malleable Iron, Copper-Free Aluminum Construction (4)
  • Hcf/Hcfmci-A (2)
  • Heavy duty material and zinc plating thickness (13)
  • Heavy duty U-bolts, hex bolts, and hex nuts. Capable of supporting heavy loads. (1)
  • Hexagonal/Splined Body And Locknut Enables Fast And Easy Installation;Corrosion Resistant (1)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC (20)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC;Type ABB is a combination of type A and BB bushings for insulating cables passing through metal boxes or troughs (2)
  • Hole Diameter 3/16" (2)
  • Hubs & Accessories (1)
  • Insulated Bushing (10)
  • Insuliner rated at 150 degrees C, zinc electro plated, lay-in lug (1)
  • Integral Bushing Which Prevents Damage to Wires;Full, Clean Cut Tapered Threads (21)
  • Integral bushings in both ends which prevents damage to wires;Funnel shaped interior to guide the wires from large to small conduit, making it easy to pull wire (1)
  • Killark’s reducing bushings and adapters assist in reducing the trade size of tapped holes and its smooth internal bushing protects conductors. The wide variety of reducing ranges allow for almost any combination of size changes. It is available in copper-free aluminum and zinc plated steel. (27)
  • Knockout Bushing (6)
  • Liquidtight (1)
  • Load Capacity 30 Lb, Weight 37 Lb per 100 (1)
  • Malleable Iron (3)
  • Max load is 1000 lbs (3)
  • Miscellaneous Fittings, Switch Box Supports, Knockout Seals, Knock Out Plug (1)
  • MULTI-FUNCTION CLIP,WIRE ROD FLNG W/3/4 EMT (1)
  • Non-grounding;Provides a smooth pulling surface (1)
  • Powergrip Grounding Ring;Built-in Sealing Device;Gland Nut Can be Tightened with Hammer and Screwdriver (1)
  • Press Fit Holds Firmly in Place when Pulling Cable (9)
  • Provide a 90 DEG change of direction in a conduit run (1)
  • Provides an economical method of sleeving through (1)
  • Provides raintight seal (10)
  • Reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size; Two reducing washers of the same size are required for each knockout; Knockout closures are used to close unused opening or knockout in sheet metal box, enclosure or cabinet (6)
  • Reducing fitting (30)
  • Right Angle (1)
  • Rounded Surface of Bushing (10)
  • Rounded surface of bushing prevents damage to wire insulation (1)
  • Rugged metallic construction (1)
  • Smooth integral bushing to protect wire insulation;Knurled body for easy wrenching (1)
  • Smooth rounded integral bushing protects conductor insulation (22)
  • Smooth Rounded Integral Bushing Protects Conductor Insulation;Full Machine Tapered Threads (NPT) (1)
  • Solid rivet through head (1)
  • Stackable for extra deep pours (1)
  • Standard NPT Threads for Easy Installation (1)
  • Tapered threads (NPT) and furnished plastic K.O. seal provide "raintight" resistance. (1)
  • Tapered Threads (NPT) and Furnished Plastic KO Seal Provide "Raintight" Resistance (1)
  • Threaded Flush Mount (1)
  • Threaded;Grounding;Corrosion Resistant (1)
  • Used in Harsh Vibration Environment (1)
  • Used in harsh vibration environments (8)
  • Used To Secure An Ordinary Nut From Working Loose By Locking, Itself When Screwed Down Tight (1)
  • Weight 13 Lb per 100 (1)
  • Weight 19 Lb per 100 (1)
  • Weight 2 Lb per 100 (3)
  • Weight 200 Lb per 100 (1)
  • Weight 22 Lb per 100 (2)
  • Weight 30 Lb per 100 (2)
  • Weight 37 Lb per 100 (1)
  • Weight 7 Lb per 100 (3)
  • Weight 70 Lb per 100 (1)
  • Weight 75 Lb per 100 (1)
  • Weight 85 Lb per 100 (1)
  • Weight 92 Lb per 100 (1)
  • Weight 95 Lb per 100 (1)
  • wet or dry locations, pregalvanized finish provides corrosion protection (2)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 12 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 24 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 26 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 5 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 100 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 110 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 140 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 160 Lb per 100 (1)
  • With 8 To 1/0 AWG Copper Lug for Copper Grounding Conductor, Weight 40 Lb per 100 (1)
  • With Bolt (5)
  • With Bolt, Weight 6 Lb per 100 (2)
  • With dual rated CU-AL C-clamp grounding lug (1)
  • Without nipple (1)
  • Zinc electro plated (3)
  • Show More...

• Application

  

  • 2 X 4 in Metal Stud (2)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (1)
  • Adapters Enlarge Drilled and Tapped Openings By 1 NPT Size (1)
  • Beam Clamp (3)
  • Commercial (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (54)
  • Connects Two Different Sizes of Conduit Together or is Used to Replace a Coupling and Reducer in an Installation (1)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Designed to secure rigid metal conduit, IMC or EMT across, parallel or perpendicular to channel, beam, and angle supports. (1)
  • Electrical (7)
  • Electrical Box (1)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (2)
  • Female Reducer to Connect Two Different Sizes of Rigid/IMC Conduit (1)
  • For AC - MCI-A - HCF steel and aluminum cable (7)
  • For Connecting Conduit To Conduit (1)
  • For Connecting Conduit To Enclosure (3)
  • For Connecting Threaded Rigid Conduit Or IMC To Box Or Enclosure (1)
  • For EMT And Rigid Conduits (3)
  • For EMT Conduit (6)
  • For Reducing Conduit Entries To A Smaller Size In Threaded Rigid And IMC Conduit Systems (22)
  • For Rigid And EMT Conduit (1)
  • For Rigid And IMC Conduits (1)
  • For Rigid Conduit And IMC (2)
  • For Service Entrance Cable (6)
  • For Threaded Rigid Conduit And IMC (27)
  • For two or three parts 613 or 617 porcelain wire holders (1)
  • For use in wet or dry locations to support runs of rigid/IMC and EMT conduit from ceilings and walls (2)
  • For Use With Locknut To Terminate Rigid Metal Conduit Or IMC To A Box Or Enclosure (1)
  • For use with rigid/IMC conduit (15)
  • For Use With Threaded Rigid Metal Conduit and IMC (3)
  • For Used To Reduce The Size Of A Knockout Or Slip Hole (6)
  • Galvanized Steel Reducing Washers Used in Pairs to Reduce Size of Knockout Holes in Box or Enclosure (22)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure. (9)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure.. (1)
  • Grounding Wire (2)
  • Hazardous Location (5)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (59)
  • Knockout (6)
  • Mast Support (1)
  • New work and Retrofit (1)
  • One hole strap for steel or Aluminum Tubing or Coaxial cable. (2)
  • Passing Jacketed Metal Clad Cables Through a Bulkhead or enclosure in Industrial Hazardous Location (1)
  • Petrochemical Refining and Processing (1)
  • Provides a Well Rounded Insulating Surface Over Which Conductors May Be Pulled or on Which Conductors May Bear While In Service (3)
  • Provides Positive Seal Against Water and Oil (1)
  • RB Reducing Bushings are Designed to Reduce Conduit Entriesto a Smaller Size and are Used in Threaded Rigid and IMC Conduit Systems (1)
  • Recommended cable types 14/2 to 10/2 with cable range O.D. Steel or Aluminum .38 to .59 AC/MC/MCIA and Steel or Aluminum 3/8" FMC. Simply snap cables into connector and snap assembly into electrical box. No tools required! Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. (1)
  • Recommended cable types used to secure Steel or Aluminum Flexible Metal Conduit or Armored, Metal Clad Cable to box or enclosure. Diameter for .70 - .855. 8/3 - 6/3 AC/MC/MCI-A (1)
  • Reduce Knockout Size On Sheet Metal Box and Enclosure/Cabinet (1)
  • Reduce strain and sagging of overhead type ACSR Service Entrance Cable. Max load is 1000 lbs. (3)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Rigid/IMC/PVC Conduit (1)
  • Sealing locknuts provide a raintight seal when securing threaded conduit or connectors with tapered or straight thread to a knockout or unthreaded slip hole. (2)
  • Serves as a short raceway between enclosures when used with a locknut. (1)
  • Snaps Into a Regular Bushin to Make a UL Listed Insulated Bushing (1)
  • Steel Locknut With PVC Seal Used to Provide Raintight Seal When Fastening Threaded Conduit to Unthreaded Opening in a Box or Enclosure (1)
  • Steel locknut with PVC seal used to provide raintight seal when fastening threaded conduit to unthreaded opening in a box or enclosure. (9)
  • steel plug used to cap unused knockout holes in box or enclosure. (6)
  • Support Conduit or Cable From Flange or Drop Wire (1)
  • Support FS Box and Outdoor Lighting Fixture or Similar Devices, per NEC Article 370-23 (1)
  • Telephone;Computer;Single or Multiple Voice Cables;Video or Data Cables (10)
  • The holding of wires (1)
  • Threaded Heavy Wall Conduit Systems (22)
  • To Close Unused Opening or Knockout in Sheet Metal Box, Enclosure/Cabinet (1)
  • To Connect Externally Threaded Conduit or Connector to a Threadless Opening In a Box or Enclosure (4)
  • To connect threaded stainless conduit to a threadless opening in a box or enclosure in an outdoor or indoor location. To positively bond conduit to a box or enclosure. (1)
  • To Help Connector Conduit and Cable Fittings to Larger Knockouts (2)
  • To positively bond conduit to box or enclosure (1)
  • To reduce the trade size of a taped hole or hub. (27)
  • To Reduce the trade size of a tapered entry (7)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • Used as a short raceway between two boxes. (1)
  • Used for Closing Threaded Conduit Hubs (8)
  • Used in Harsh Vibration Environments to Fasten Threaded Conduit to Unthreaded Opening in a Box or Enclosure (1)
  • Used in harsh vibration environments to fasten threaded conduit to unthreaded opening in a box or enclosure. (8)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 60610-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (4)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to fasten threaded conduit to unthreaded opening in a box or enclosure. (1)
  • Used to fasten threaded connectors or nipples to box or enclosure. (2)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (12)
  • Used to reduce a knockout or sliphole in a sheet metal enclosure to a smaller trade size. (8)
  • Used to reduce the size of internal female threads. 1/2" thru 2" steel, 2 1/2" thru 4" malleable iron. (4)
  • Used to secure and hang conduit (1)
  • Used to secure conduit perpendicular to beam or channel. (1)
  • Used to support FS box, outdoor lighting fixture, or similar devices, per NEC article 370-23. (1)
  • Used With Locknut to Terminate Service Conduit to Cabinet (10)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. (2)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. (9)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Wire protection (2)
  • Show More...

• Package Quantity

  

  • 1 ct (2)
  • 1 CT;10 PK (2)
  • 1 CT;2 Pk (1)
  • 1 CT;25 PK (2)
  • 1 CT;50 Pk (2)
  • 1 PK (1)
  • 10 PK (5)
  • 10 PK;1 CT (24)
  • 100 PK (13)
  • 100 PK;1 CT (10)
  • 100 PK;10 CT (1)
  • 100 PK;25 CT (2)
  • 1000 PK (6)
  • 1000 PK;100 CT (8)
  • 15 PK;1 CT (1)
  • 2 PK (Inner);20 PK (Outer) (1)
  • 2 PK;1 CT (5)
  • 20 PK;1 CT (6)
  • 200 PK (4)
  • 200 PK;20 CT (1)
  • 200 PK;50 CT (4)
  • 2000 PK;20 CT (1)
  • 25 CT (5)
  • 25 PK (7)
  • 25 PK;1 CT (12)
  • 25 PK;5 CT (1)
  • 250 PK;25 CT (4)
  • 250 PK;50 CT (1)
  • 5 PK (1)
  • 5 PK;1 CT (3)
  • 50 CT (3)
  • 50 CT;200 PK (1)
  • 50 PC (1)
  • 50 PK (5)
  • 50 PK;1 CT (9)
  • 50 PK;10 CT (1)
  • 500 PK (4)
  • 500 PK;50 CT (4)
  • Show More...

• Weight

  

  • 0.004 lb/EA (3)
  • 0.005 lb/EA (1)
  • 0.0054 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.0071 lb/EA (1)
  • 0.008 lb/EA (2)
  • 0.0089 lb (1)
  • 0.01 lb/EA (3)
  • 0.0100 lb/EA (1)
  • 0.0108 lb/EA (1)
  • 0.012 lb/EA (1)
  • 0.0132 lb (1)
  • 0.014 lb/EA (1)
  • 0.015 lb/EA (2)
  • 0.0151 lb (1)
  • 0.016 lb/EA (1)
  • 0.0167 lb/EA (1)
  • 0.017 lb (1)
  • 0.0179 lb (1)
  • 0.018 lb/EA (1)
  • 0.0183 lb/EA (1)
  • 0.0196 lb/EA (1)
  • 0.02 lb/EA (2)
  • 0.0234 lb (2)
  • 0.0282 lb (1)
  • 0.0282 lb/EA (1)
  • 0.0295 lb (1)
  • 0.03 lb (1)
  • 0.03 lb/EA (1)
  • 0.0315 lb (1)
  • 0.0396 lb (1)
  • 0.04 lb (1)
  • 0.04 lb/EA (3)
  • 0.0400 lb/EA (1)
  • 0.041 lb (1)
  • 0.0415 lb (1)
  • 0.0435 lb (1)
  • 0.045 lb/EA (1)
  • 0.046 lb (1)
  • 0.0475 lb/EA (1)
  • 0.05 lb (1)
  • 0.06 lb/EA (1)
  • 0.0625 lb (1)
  • 0.067 lb (1)
  • 0.069 lb (1)
  • 0.0692 lb (1)
  • 0.07 lb (1)
  • 0.07 lb/EA (2)
  • 0.074 lb (1)
  • 0.075 lb/EA (1)
  • 0.0839 lb/EA (1)
  • 0.084 (1)
  • 0.085 lb (1)
  • 0.091 lb (1)
  • 0.094 lb/EA (1)
  • 0.1 lb/EA (1)
  • 0.102 lb (1)
  • 0.107 lb (1)
  • 0.11 lb/EA (1)
  • 0.113 lb (1)
  • 0.12 lb (1)
  • 0.1200 lb (1)
  • 0.1240 lb (1)
  • 0.1320 lb (1)
  • 0.14 lb (1)
  • 0.1600 lb/EA (1)
  • 0.17 (1)
  • 0.18 lb/EA (1)
  • 0.19 lb/EA (1)
  • 0.2 lb (1)
  • 0.2190 lb (1)
  • 0.22 lb/EA (2)
  • 0.23 lb/EA (1)
  • 0.25 lb/EA (1)
  • 0.2700 lb (1)
  • 0.29 lb/EA (1)
  • 0.31 (1)
  • 0.33 lb/100 (1)
  • 0.3300 lb (1)
  • 0.35 lb/EA (1)
  • 0.3580 lb (1)
  • 0.37 lb (1)
  • 0.38 (1)
  • 0.42 lb/EA (1)
  • 0.430 lb/EA (1)
  • 0.45 lb/EA (1)
  • 0.47 lb/EA (1)
  • 0.4840 lb (1)
  • 0.4920 lb (1)
  • 0.55 lb/EA (1)
  • 0.57 lb/EA (1)
  • 0.64 lb/EA (1)
  • 0.6580 lb (1)
  • 0.69 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.7600 lb (1)
  • 0.78 (1)
  • 0.82 lb/EA (1)
  • 0.8260 lb (1)
  • 0.85 lb/EA (1)
  • 0.9 lb/EA (1)
  • 1 lb/EA (1)
  • 1.17 (1)
  • 1.20 lb/EA (1)
  • 1.3 lb (1)
  • 1.3 lb/EA (1)
  • 1.68 lb/EA (2)
  • 11.0 lb (2)
  • 110 lb/100 (1)
  • 12 lb/100 (1)
  • 12.0 lb (1)
  • 19 lb/100 (1)
  • 2.1 lb/EA (1)
  • 2.2 lb/EA (1)
  • 2.35 (1)
  • 2.45 lb/EA (1)
  • 2.48 lb/EA (1)
  • 23.5 lb/100 (1)
  • 24 lb/100 (1)
  • 26 lb/100 (1)
  • 5 lb/100 (1)
  • 53 lb/100 (1)
  • 70 lb/100 (1)
  • 9 lb/100 (1)
  • 9.0 lb (1)
  • 92.00 lb pe 100 Pieces;41.7 kg per 100 Pieces (1)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (2)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (194)
  • DIECAST EMT FITTINGS (1)
  • DIECAST OFFSET & CHASE NIPPLES (5)
  • FORM 5 CONDULETS, COVERS, & GASKETS (1)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (1)
  • Fuses & Fuse Accessories (8)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (420)
  • PVC ELBOWS (4)
  • PVC SPACERS (32)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (13)
  • SLB'S & JAKE ELL'S (1)
  • STEEL EMT FITTINGS (2)
  • Show More...

• Color

  

  • Black (48)
  • Blue (3)
  • Gray (33)
  • Grey with Black Insulator (25)
  • Metallic (1)
  • Polished Silver (7)
  • Red (6)
  • Red;Silver (1)
  • Silver (41)
  • White (20)
  • Yellow (15)
  • Show More...

• Cable Entry

  

  • Does not Apply (2)
  • Through the fitting or conduit that the locknut is attached to (34)
  • Show More...

• Temperature Rating

  

  • 105 DEG C (25)
  • 105 Degree C (7)
  • 105?°C (17)
  • 150 DEG C (2)
  • 150?° (9)
  • 150?°C (25)
  • 90?°C (10)
  • Show More...

• Material

  

  • 0.002 Inch Red Urethane Ferrous Metal Interior, 0.04 Inch Gray PVC Coated Ferrous Metal Exterior (1)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior/Exterior (4)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (2)
  • 2 Mil Red Urethane Coated Interior/Exterior Ferrous Metal (2)
  • 2 MIL Red Urethane Ferrous Metal Interior, 40 MIL Gray PVC Ferrous Metal Exterior (4)
  • 20 Mil Gray PVC Coated Malleable Iron (1)
  • 316 Stainless Steel (3)
  • Aluminum (18)
  • Aluminum/Stainless Steel (3)
  • Copper Free Aluminum (4)
  • Copper-Free Aluminum (36)
  • Copper-Free Aluminum Body, Stainless Steel Screws (5)
  • Die-Cast Zinc Body, Steel Cap (2)
  • ELECTROGALVANIZED STEEL (1)
  • Feraloy Iron (6)
  • FERALOY IRON ALLOY (12)
  • Ferrous Metal (2)
  • Galvanized Steel (1)
  • Gray iron alloy (8)
  • High Carbon Steel/Spring Tempered (1)
  • IRON (3)
  • MACHINED PAPER LAMINATED PHENOLIC (2)
  • Malleable Iron (25)
  • Malleable Iron Body, Plastic Throat Liner (21)
  • Metal (1)
  • Non-Metallic (2)
  • Nylon (2)
  • Nylon Plastic (7)
  • Phenolic (22)
  • Plastic (65)
  • Plated Steel (6)
  • Polypropylene (PP) (1)
  • POLYURETHANE COATED FERROUS (4)
  • Porcelain, Steel (1)
  • PVC Coated Zinc (1)
  • Spring Steel (1)
  • Stainless Steel - 316 (7)
  • Steel (177)
  • Thermoplastic (3)
  • Zinc (6)
  • Zinc Alloy (9)
  • Zinc Die Cast (22)
  • Show More...

• Finish

  

  • #4 Polished Finish (7)
  • 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (2)
  • 20 MIL GRAY PVC COATED (5)
  • 20 Mil Gray PVC Coated (Exterior) (1)
  • Ball burnish (30)
  • Black (2)
  • Caddy Armour (1)
  • Caddy?® Armour (1)
  • Electro Zinc Plated (1)
  • Electrogalvanized with Aluminum Acrylic Paint (3)
  • Electrogalvanized With Aluminum Acrylic Painted (20)
  • Electrogalvanized With Chromate Treatment (7)
  • Galvanized (12)
  • Hot Dip Galvanized (3)
  • Natural (6)
  • NO FINISH (37)
  • POLISHED (2)
  • Pre-Galvanized Zinc (6)
  • Silver (1)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (1)
  • UL and CSA (1)
  • Unfinished (7)
  • Untreated (16)
  • Zinc Electroplate (20)
  • Zinc Electroplated (55)
  • Zinc Electroplated Body, Tin Plated Lug (3)
  • Zinc Plated (29)
  • Show More...

• Type

  

  • 1-HOLE (1)
  • 1-Hole Aluminum Strap (6)
  • 90 DEG Short Bushed Elbow (1)
  • ADAPTER (3)
  • Anti Short Bushing (4)
  • BLANK (6)
  • BOX CONNECTOR (1)
  • Box Support (1)
  • Box Supports (2)
  • BUSHING (82)
  • Bushings (1)
  • Cable and conduit hanger (7)
  • Channel Bar (1)
  • CLAMP (1)
  • Compression Connector (1)
  • Compression, Flex to EMT (1)
  • Concrete Pipe Sleeve (1)
  • Conduit bushed (chase) nipple (5)
  • Conduit Bushing (1)
  • Conduit Clamps (1)
  • Conduit Clip (1)
  • CONDUIT HANGER (1)
  • CONDUIT HANGER WITH BOLT (1)
  • Conduit Hangers (1)
  • Conduit Locknut (1)
  • Conduit Nipples (1)
  • Conduit plug (31)
  • CONNECTOR (1)
  • COUPLING (1)
  • Double Snap (1)
  • ELBOW (1)
  • Expansion coupling (4)
  • Female Reducer (1)
  • FEMALE/FEMALE (1)
  • Flex (1)
  • Ground Hub Swing Type (2)
  • Grounding bushing (18)
  • Grounding Bushings & Accessories (10)
  • Grounding Hub (1)
  • Grounding, Rigid/IMC, Insulated (1)
  • Hub Connector (1)
  • Insulated Bushing (4)
  • Insulated Grounding Bushing With Aluminum Lay-In-Lug (3)
  • Insulating Bushing (11)
  • Insulating Sleeve (1)
  • Knockout Bushing (1)
  • Knockout Plugs (6)
  • Knockout Seal (3)
  • Knockout snap-in blank (4)
  • LOCKNUT (1)
  • Locknut for Conduit Fitting (2)
  • Locknuts (39)
  • NAIL PLATE (2)
  • Non Metallic Bushing (1)
  • Offset Nipple (1)
  • PLUG (1)
  • Push-In Connector (2)
  • Raintight compression coupling (3)
  • REDUCER (56)
  • Reducing Bushing (58)
  • Reducing Flush Bushing (3)
  • Reducing Washer (22)
  • Reducing Washer for Conduit Systems (2)
  • Reducing Washers (25)
  • Right Angle Conduit Clamp (1)
  • Right angle type conduit clamp (1)
  • RIGID (4)
  • Rigid/IMC and EMT conduit (2)
  • Rigid/IMC Conduit Fittings (1)
  • Rod/Wire (1)
  • ROUND BEND (5)
  • Sealing Locknut (2)
  • Snap In Blank (1)
  • Snap-on (1)
  • SPLIT (9)
  • Stainless Steel LINE TERMINATION HUB (1)
  • Stainless Steel MINI HANGER (1)
  • STANDARD RADIUS (2)
  • Straps (2)
  • Teck Cable Fittings (1)
  • TEE (1)
  • THREADED (11)
  • Threaded Bushing (9)
  • THREADED FEMALE (1)
  • Threaded Female, Capped (2)
  • Threaded Reducer (1)
  • Throat bushing (6)
  • Through Bulkhead Fitting (5)
  • Through Stud Cable/Conduit Supports (1)
  • Type A Non-Grounding Insulating Bushing (10)
  • Type ABB Insulating Bushing (2)
  • Type ABLG Insulated Grounding Bushing (5)
  • Type BB Non-Grounding Insulating Bushing (10)
  • Type ICC Phenolic Insulating Coupling (1)
  • UNF Standard Expansion Union (3)
  • UNF Union (1)
  • Union (1)
  • Universal Pipe Support (1)
  • Wedge Grip Clamps (3)
  • Wire Holder with Hanger (1)
  • Show More...

• Size

  

  • 0.282 in x 1.050 in x 1.050 in (1)
  • 0.287 in x 1.21 in x 1.21 in (1)
  • 0.329 in x 1.48 in x 1.48 in (1)
  • 0.969 in x 1.75 in x 2.125 in (1)
  • 1 (18)
  • 1 - 1/2 (2)
  • 1 - 3/4 (2)
  • 1 1/2 (4)
  • 1 1/4 (5)
  • 1 in (13)
  • 1 To 1/2 In (1)
  • 1 To 3/4 In (1)
  • 1 X 0.75 (1)
  • 1 X 1/2 (1)
  • 1 X 3/4 (2)
  • 1" (1)
  • 1.25 X 0.5 (1)
  • 1.25 X 0.75 (1)
  • 1/2 (14)
  • 1/2 in (8)
  • 1/2 INCH (3)
  • 1/2 To 3/8 In (1)
  • 1/2 X 3/8 (1)
  • 1-1/2 (12)
  • 1-1/2 - 1 (2)
  • 1-1/2 - 1/2 (2)
  • 1-1/2 - 1-1/4 (2)
  • 1-1/2 - 3/4 (2)
  • 1-1/2 3/4 (1)
  • 1-1/2 in (6)
  • 1-1/2 INCH (1)
  • 1-1/2 To 1 In (1)
  • 1-1/2 To 1/2 In (1)
  • 1-1/2 To 1-1/4 In (1)
  • 1-1/2 To 3/4 In (1)
  • 1-1/2 X 1 (1)
  • 1-1/2 x 1-1/4 (2)
  • 1-1/4 (9)
  • 1-1/4 - 1 (2)
  • 1-1/4 - 1/2 (2)
  • 1-1/4 - 3/4 (2)
  • 1-1/4 in (5)
  • 1-1/4 INCH (1)
  • 1-1/4 To 1 In (1)
  • 1-1/4 To 1/2 In (1)
  • 1-1/4 To 3/4 In (1)
  • 1-1/4 X 1 (1)
  • 1-1/4 X 1/2 (1)
  • 1-1/4 X 3/4 (2)
  • 1-2/2 x 1/2 (1)
  • 18" x 1-1/2" (1)
  • 1-Inch (3)
  • 2 (16)
  • 2 - 1 (2)
  • 2 - 1 1/2 (1)
  • 2 - 1 1/4 (1)
  • 2 - 1/2 (2)
  • 2 - 1-1/2 (1)
  • 2 - 1-1/4 (1)
  • 2 - 3/4 (1)
  • 2 1/2 (4)
  • 2 1/2 - 1 (1)
  • 2 1/2 - 1 1/2 (1)
  • 2 1/2 - 1 1/4 (1)
  • 2 1/2 - 1/2 (1)
  • 2 1/2 - 2 (1)
  • 2 1/2 - 3/4 (1)
  • 2 1/2 Inch (1)
  • 2 -3/4 (1)
  • 2 in (12)
  • 2 INCH (2)
  • 2 To 1 In (1)
  • 2 To 1/2 In (1)
  • 2 To 1-1/2 In (1)
  • 2 To 1-1/4 In (1)
  • 2 To 3/4 In (1)
  • 2 X 1 (1)
  • 2 x 1/2 (2)
  • 2 X 1-1/2 (2)
  • 2 X 1-1/4 (1)
  • 2 x 3/4 (1)
  • 2.063 in x 0.875 in x 1.063 in (1)
  • 2.438 in x 0.875 in x 1.203 in (1)
  • 2-1/2 (12)
  • 2-1/2 - 2 (1)
  • 2-1/2 in (1)
  • 2-1/2 To 1 In (1)
  • 2-1/2 To 1-1/2 In (1)
  • 2-1/2 To 1-1/4 In (1)
  • 2-1/2 To 2 In (1)
  • 2-1/2 X 1 (1)
  • 2-1/2 X 2 (1)
  • 3 (16)
  • 3 - 1 1/4 (1)
  • 3 - 2 (1)
  • 3 - 2 1/2 (1)
  • 3 - 2-1/2 (1)
  • 3 -1 1/2 (1)
  • 3 1/2 (2)
  • 3 1/2 - 2 (1)
  • 3 1/2 - 2 1/2 (1)
  • 3 1/2 - 3 (1)
  • 3 in (3)
  • 3 INCH (2)
  • 3 To 1 In (1)
  • 3 To 1-1/2 In (1)
  • 3 To 1-1/4 In (1)
  • 3 To 2 In (1)
  • 3 To 2-1/2 In (1)
  • 3 x 2 (2)
  • 3 X 2-1/2 (1)
  • 3/4 (15)
  • 3/4 - 1/2 (2)
  • 3/4 in (6)
  • 3/4 In (Rigid/EMT) (1)
  • 3/4 INCH (3)
  • 3/4 Inch/21mm (1)
  • 3/4 Rigid, 3/4 EMT (1)
  • 3/4 X 1/2 (2)
  • 3/8 (3)
  • 3/8 In, 1/2 In (Rigid), 1/2 In (EMT) (1)
  • 3-1/2 (4)
  • 3-1/2 - 3 (1)
  • 3-1/2 in (3)
  • 3-1/2 Inch (1)
  • 3-1/2 To 3 In (2)
  • 3-1/2 x 2 (1)
  • 3-1/2 X 2-1/2 (1)
  • 3-1/2 X 3 (1)
  • 4 (15)
  • 4 - 2 (1)
  • 4 - 2 1/2 (1)
  • 4 - 3 (1)
  • 4 - 3 1/2 (1)
  • 4 - 3-1/2 (1)
  • 4 in (4)
  • 4 INCH (1)
  • 4 To 2-1/2 In (1)
  • 4 To 3 In (1)
  • 4 To 3-1/2 In (1)
  • 4 x 3 (1)
  • 4.25 Inch Diameter (1)
  • 5 (4)
  • 5 in (1)
  • 6 (1)
  • 6 In (1)
  • 6" x 1-1/2" (1)
  • L(0.652) x W(0.652) x H(0.568) (1)
  • L(0.840) x W(0.840) x H(0.520) (1)
  • L(0.840) x W(0.840) x H(0.605) (1)
  • L(1.020) x W(1.020) x H(0.675) (1)
  • L(1.056) x W(1.056) x H(0.531) (1)
  • L(1.070) x W(1.070) x H(0.310) (1)
  • L(1.125) x W(1.125) x H(0.230) (1)
  • L(1.140) x W(1.140) x H(0.505) (1)
  • L(1.235) x W(1.235) x H(0.310) (1)
  • L(1.250) x W(1.250) x H(0.815) (1)
  • L(1.278) x W(1.278) x H(0.625) (1)
  • L(1.420) x W(1.420) x H(0.505) (1)
  • L(1.480) x W(1.480) x H(0.310) (1)
  • L(1.554) x W(1.441) x H(1.548) (1)
  • L(1.640) x W(1.640) x H(0.614) (1)
  • L(1.761) x W(1.997) x H(1.893) (1)
  • L(1.763) x W(1.995) x H(1.904) (1)
  • L(1.770) x W(1.750) x H(0.400) (1)
  • L(1.770) x W(1.770) x H(0.505) (1)
  • L(1.800) x W(1.800) x H(0.310) (1)
  • L(1.915) x W(1.915) x H(0.630) (1)
  • L(11.000) x W(1.750) x H(0.525) (1)
  • L(2.109) x W(1.333) x H(1.070) (1)
  • L(2.215) x W(2.215) x H(0.360) (1)
  • L(2.281) x W(2.281) x H(0.505) (1)
  • L(2.327) x W(2.327) x H(0.627) (1)
  • L(2.384) x W(1.607) x H(1.070) (1)
  • L(2.598) x W(2.598) x H(0.505) (1)
  • L(2.675) x W(2.675) x H(0.360) (1)
  • L(2.734) x W(1.944) x H(1.496) (1)
  • L(2.890) x W(2.890) x H(0.250) (1)
  • L(2.919) x W(2.919) x H(0.563) (1)
  • L(3.062) x W(3.062) x H(1.225) (1)
  • L(3.065) x W(3.065) x H(1.230) (1)
  • L(3.130) x W(2.184) x H(1.385) (1)
  • L(3.604) x W(2.665) x H(1.385) (1)
  • L(3.690) x W(3.690) x H(1.225) (1)
  • L(3.695) x W(3.695) x H(1.230) (1)
  • L(4.008) x W(3.258) x H(3.950) (1)
  • L(4.311) x W(4.311) x H(1.230) (1)
  • L(4.652) x W(3.425) x H(1.735) (1)
  • L(4.810) x W(4.022) x H(1.790) (1)
  • L(4.812) x W(4.812) x H(1.240) (1)
  • L(4.815) x W(4.815) x H(1.233) (1)
  • L(5.751) x W(2.500) x H(0.505) (2)
  • L(5.783) x W(4.545) x H(1.741) (1)
  • L(6.282) x W(5.040) x H(1.725) (1)
  • L(7.069) x W(2.269) x H(1.255) (1)
  • L(7.286) x W(5.350) x H(0.627) (1)
  • L(8.500) x W(4.125) x H(5.625) (1)
  • L(8.500) x W(6.125) x H(7.625) (1)
  • Show More...