Filter Your Results

Anchors, Connectors, & Fasteners

• Categories
• Anchors & Connectors

---

• Category Description

  

  • ADHESIVES (1)
  • ANCHORS & ANCHOR KITS (163)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (47)
  • BOX SUPPORT (36)
  • CABLE & PIPE TRANSITS (49)
  • CADDY (STRAPS ONLY) (30)
  • Commercial switches (1)
  • Comp & Mech Lugs and Butt Splices (734)
  • CONDUIT HANGERS/STAND OFF STRAPS (4)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (2)
  • Datacom Wiring Devices and Accessories (19)
  • DECORATIVE RESIDENTIAL (1)
  • Disconnect Accessories (3)
  • DISCONNECTS (9)
  • EXOTHERMIC GROUNDING PRODUCTS (6)
  • FASTENERS (72)
  • FLEX & MC FITTINGS (13)
  • Fluorescent Fixtures & Accessories (1)
  • Fuses & Fuse Accessories (33)
  • HAND TOOLS (41)
  • HEAT/COLD SHRINK (189)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (7)
  • MISC FITTINGS (8)
  • Miscellaneous residential devices (2)
  • MOLDED CASE BREAKERS (1)
  • POWER TOOL ACCESSORIES (3)
  • POWER TOOLS (1)
  • Powerdefense Breakers (11)
  • PULL LINE, ROPE, CARRIERS (1)
  • Residential cord connectors (2)
  • Residential Switches (1)
  • SAFETY PRODUCTS (9)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (932)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (95)
  • SPLICE KITS (46)
  • SPLIT BOLTS (247)
  • SPRING NUTS & TWIRL NUTS (9)
  • STEEL BOXES & COVERS (3)
  • T&B C TAP LUGS (41)
  • TAPE (188)
  • TERMINAL BLOCK ACESSORIES (44)
  • TERMINAL BLOCKS POWER DIST BLOCKS (96)
  • TERMINALS (455)
  • THREAD RODS (2)
  • TOOL BAG/POUCHES (1)
  • WIRE LUBE, MARKERS, & TIES (151)
  • WIRE NUTS (142)
  • Show More...

• Brand

  

  • 3M (158)
  • 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS (1)
  • 3M(TM) (1)
  • 3M[T] (1)
  • ABB (1)
  • Abb Installation Products, Inc (1)
  • AMERICAN INDUSTRIAL (1)
  • ARLINGTON (2)
  • Arlington Industries (2)
  • AUSTIN BOLT (2)
  • BERTREM PRODUCTS INC (1)
  • Blackburn Grounding (13)
  • Blackburn Mechanical (160)
  • Blueline (1)
  • Brady® (66)
  • Bridgeport (2)
  • BRISCON (2)
  • Buchanan (42)
  • BURNDY (352)
  • Burndy LLC (8)
  • CADDY (1)
  • CALBRITE (7)
  • Catamount (32)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (162)
  • Connector Bloks(TM) (16)
  • Cooper B-Line/Cable Tray (1)
  • COOPER WIRING DEVICES (1)
  • CULLY (1)
  • Deltec (2)
  • Dottie (8)
  • DOTTIE L H COMPANY (1)
  • Dual Lock (1)
  • EASYHEAT (1)
  • Easy-Twist (2)
  • Eaton (166)
  • EATON B-LINE SERIES (1)
  • Eaton Corp (8)
  • EATON CROUSE-HINDS SERIES (2)
  • EATON CUTLER-HAMMER (46)
  • Engineered Products CO. (1)
  • Erico, Inc. Eritec-Caddy (11)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • FASTENERS, INC. (4)
  • Gardner Bender (29)
  • Hellermanntyton (4)
  • Highland (14)
  • Homac (7)
  • HYLUG[TM] (1)
  • Ideal (128)
  • Ilsco (20)
  • Ilsco Corporation (38)
  • Impact Staples (3)
  • King (1)
  • Klein Tools (10)
  • L.H. Dottie CO. (34)
  • LEGRAND-PASS & SEYMOUR (1)
  • LH DOTTIE (432)
  • Metallics (1)
  • milwaukee (2)
  • Milwaukee Electric Tool (8)
  • Milwaukee® (8)
  • Minnesota Mining (3M) (70)
  • Newell (Dymo) (5)
  • NSi (344)
  • Nsi Industries (149)
  • nVent CADDY (71)
  • nVent ERICO (6)
  • PANDUIT (348)
  • Panduit Corporation (10)
  • Panduit® (84)
  • Pass & Seymour (1)
  • Pass and Seymour (1)
  • Peco Fasteners (215)
  • Peco Fasteners, Inc. (175)
  • Performance Plus (2)
  • Platinum Tools (7)
  • Polaris (48)
  • Rack-A-Tiers (6)
  • Rectorseal (1)
  • Scotch (48)
  • Scotchcast (5)
  • ScotchCode (4)
  • Scotchfil (1)
  • Scotchlok (41)
  • Scotchlok[TM] (1)
  • Scotchrap (1)
  • Scotch-Seal (2)
  • Selecta Products (20)
  • Shrink-Kon (3)
  • Southwire (6)
  • Southwire Rough Electrical Com (2)
  • Sta-Kon (170)
  • Steel City (2)
  • Super 33+ (2)
  • T&B Elec Suppl (9)
  • T&B Ind Fitting (6)
  • Tartan (2)
  • TE CONNECTIVITY / ENERGY (3)
  • Temflex (10)
  • Thomas & Betts (23)
  • Thomas Lighting (1)
  • Thomas&Betts-Abb Ins Prod (16)
  • Tiffin Insulators CO. (2)
  • Tools & Accessories (1)
  • Tork(R) (1)
  • TRINITY ELECTRIC SUPPLY (1)
  • Ty-Fast (1)
  • Ty-Grip (1)
  • Ty-Rap (78)
  • UNISTRUT (1)
  • Unistrut Corp. (3)
  • W.W. Cross Inc. (7)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (4)
  • Show More...

• Poles

  

  • 1 (187)
  • 2 (1)
  • 3 (4)
  • 3 in (2)
  • 4 (1)
  • 600 V (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 12 VDC (1)
  • 120/277 (2)
  • 1k/5k (4)
  • 2 (1)
  • 2000 (11)
  • 24 VDC (2)
  • 250 (1)
  • 300 (11)
  • 300 kV (1)
  • 300 V (46)
  • 300, 400 (2)
  • 300/600 V (1)
  • 300V (1)
  • 35 (131)
  • 35 kV (151)
  • 35000 V (1)
  • 35kV (2)
  • 600 (173)
  • 600 A (1)
  • 600 V (527)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (8)
  • 600 V ac (28)
  • 600 V ac/dc (1)
  • 600 V Max (1)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (11)
  • 600 V to 35 KV (2)
  • 600 Volt (4)
  • 600V (4)
  • EN 550V, UL 600V, 800V connection (2)
  • IEC 1000V, EN 726V, UL 600V (1)
  • IEC 250V, UL 300V (1)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 550V, UL 600V (1)
  • IEC 800V, EN 700V, UL 600V (12)
  • IEC 800V, UL 300V (1)
  • NA (19)
  • UL 300,600V, 500V connection (1)
  • UL 300V (1)
  • Show More...

• Minimum Qty

  

  • 10 (11)
  • 100 (469)
  • 1000 (38)
  • 15 (7)
  • 150 (4)
  • 15000 (1)
  • 2 (2)
  • 20 (8)
  • 200 (8)
  • 20000 (1)
  • 225 (1)
  • 25 (48)
  • 250 (13)
  • 30 (1)
  • 300 (4)
  • 3000 (1)
  • 30000 (1)
  • 350 (1)
  • 35000 (1)
  • 40 (3)
  • 4000 (1)
  • 5 (2)
  • 50 (199)
  • 500 (64)
  • 5000 (7)
  • 6000 (3)
  • 75 (4)
  • 750 (2)
  • 7500 (1)
  • 8000 (1)
  • Show More...

• Number Of Conductors

  

  • 1 (91)
  • 1 to 6 (2)
  • 10 (2)
  • 12 (2)
  • 2 (182)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 4 (1)
  • 2 to 6 (7)
  • 3 (32)
  • 4 (19)
  • 5 (7)
  • 6 (8)
  • 8 (4)
  • Show More...

• Color

  

  • Aluminum (18)
  • Black (235)
  • Black (BK) (1)
  • Black Lettering - Orange Background (1)
  • Black on Bright Red (1)
  • Black on Orange (1)
  • Black on Red (1)
  • Black on White (5)
  • Black Print on White (2)
  • Black, Blue, Red Printed on White (1)
  • Black, Red on White (1)
  • BLACK, YELLOW (1)
  • Blue (190)
  • Blue Light (1)
  • Blue/Gray (2)
  • Brass (1)
  • Bronze (3)
  • Brown (80)
  • Brown, Orange, Yellow Print on White (1)
  • Chromated steel (2)
  • Clear (23)
  • Clear/White (1)
  • Colorless (6)
  • Colorless/White (1)
  • Copper (25)
  • Gold (2)
  • Gray (69)
  • Gray 0 (2)
  • Green (48)
  • GREEN/YELLOW (6)
  • Grey (18)
  • Ivory (23)
  • Light Blue (1)
  • Light Grey (1)
  • Matte Black Finish (3)
  • Metallic (46)
  • Miscellaneous (2)
  • Multiple Colors (1)
  • Natural (24)
  • OLIVE (5)
  • Orange (39)
  • Pink (36)
  • Polished Silver (6)
  • Purple (32)
  • Red (166)
  • Red (Main) - Red (Tap) (1)
  • Red and Black Header on White (1)
  • Red Striped Background (2)
  • Red, Blue, Yellow (1)
  • Red/Silver/Black (1)
  • Red/Tan (3)
  • RUBY (4)
  • Silver (19)
  • Stainless (3)
  • Steel (2)
  • Tan (15)
  • Tan, Yellow, Red, & Blue (1)
  • Tin Plated Copper (12)
  • Ultraviolet Black (1)
  • Various (4)
  • Violet (3)
  • White (82)
  • WHITE GLOSS (1)
  • Yellow (158)
  • Yellow Handle (2)
  • ZINC PHOSPHATE (1)
  • Show More...

• Stud Size

  

  • #10 (4)
  • 1/2 (60)
  • 1/2 in (45)
  • 1/2 INCH (1)
  • 1/4 (57)
  • 1/4 in (25)
  • 1/4 INCH (1)
  • 3/8 (57)
  • 3/8 in (31)
  • 5/16 (7)
  • 5/16 in (14)
  • 5/16 INCH (1)
  • 5/8 (2)
  • 5/8 in (9)
  • 8 (1)
  • NA (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (6)
  • 18-8 Stainless (15)
  • Acrylic (3)
  • Aluminum (18)
  • Anodized (2)
  • Bare (1)
  • Black Annealed (2)
  • Black Oxide (15)
  • Black Phosphate (3)
  • blank (8)
  • Blue (3)
  • Bronze (10)
  • Caddy?® Armour (32)
  • CADDY® ARMOUR (5)
  • Ceramic Coated (3)
  • Ceramic Coated Blue (4)
  • CHROME (1)
  • COPPER (28)
  • DETENTE ASSEMBLY (1)
  • Electro Galvanized (4)
  • Electro Plated (1)
  • Electro -Tin Plated (14)
  • Electro Tinned (10)
  • Electro-galvanized (4)
  • ELECTROGALVANIZED (2)
  • Electrogalvanizing (1)
  • EPDM Rubber Insulated (8)
  • Galvanized (11)
  • Gloss (21)
  • Graphite Metallic (12)
  • Green (4)
  • Green Zinc Plated (1)
  • Matte (36)
  • Nickel (1)
  • Nickel Plated (2)
  • Nickel-Plated (3)
  • nVent CADDY Armour (3)
  • NYLON (2)
  • Painted (4)
  • Plain (17)
  • PLAIN (NO FINISH) (1)
  • Plastisol (2)
  • Plastisol Insulated (84)
  • POLISHED (1)
  • Polycarbonate (3)
  • Polypropylene (2)
  • Pre-Galvanized (17)
  • Pre-galvanized; CADDY® ARMOUR (1)
  • Red (1)
  • Silicon Bronze (3)
  • Smooth (1)
  • Stainless (3)
  • STAINLESS STEEL (1)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (28)
  • Tin Plated (178)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tinned (133)
  • Tin-Plated (79)
  • Uncoated (2)
  • Untreated (3)
  • Weather Resistant Coated (1)
  • white (2)
  • YELLOW (1)
  • Yellow Zinc (8)
  • Yellow Zinc Plated (4)
  • Zinc (54)
  • Zinc electro-plate (1)
  • Zinc Phosphate (72)
  • Zinc Plated (382)
  • Zinc-Plated, Tin-Plated Steel Sleeves (2)
  • Show More...

• Material

  

  • 1 (1)
  • 18-8 STAINLESS STEEL (23)
  • 304 Grade Stainless Steel (2)
  • 6061-T6 Aluminum Connector, Santoprene Body (1)
  • ABS (6)
  • Acrylonitrile butadiene styrene (3)
  • Aluminum (334)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum Alloy-Tin Plated (4)
  • Aluminum body -Glass Filled Polyester Base (5)
  • Aluminum, Glass Filled Polyester Base (1)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • ASTM A36/A575/A576/A635/A1011 Grade 33 Low Carbon Steel (2)
  • Body - Modified Neoprene Elastomer, Straps - Nylon (1)
  • Brass (48)
  • Brass and Nickel Plated (1)
  • Brass with Copper Sleeve (9)
  • Brass-Alloy (1)
  • Bright Dipped Cast High Copper Alloy Body, Durium Silicon Bronze Hardware (1)
  • Bronze Alloy (16)
  • Bronze Alloy, Leaded (11)
  • Bronze, Leaded, Commercial (12)
  • Carbon Steel (19)
  • Carrying Case is Plastic (1)
  • CASE HARDENED ASTM A576, ASTM A570 1015, 45 MILD STEEL (2)
  • Clear Acrylic (3)
  • Cold Rolled High Carbon Steel (51)
  • Copper (814)
  • COPPER ALLOY (40)
  • Copper Alloy, Cast (11)
  • Copper Sleeves (2)
  • Copper, Beryllium (1)
  • Copper, Nylon (2)
  • Copper, PVC (1)
  • Copper/PVC (1)
  • Copper;Copper alloy (1)
  • Cotton (1)
  • Cotton Cloth (1)
  • Economy Vinyl (1)
  • Electro-Tin Plated Copper (1)
  • Engineered Plastic (1)
  • EPDM RUBBER (1)
  • Extruded Polymer (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Fiberglass (1)
  • Flame-retardant Polypropelene (50)
  • Flame-retardant polypropelene shell (10)
  • Flame-Retardant Polypropylene (2)
  • FLEXIBLE POLYOLEFIN (1)
  • Galvanized Steel (4)
  • Glass Filled Nylon (1)
  • Glass Filled Polyester (1)
  • GMV3 Self-Laminating Vinyl (1)
  • Grade 5 Steel (8)
  • Graphite Metallic Steel (8)
  • HEAT SHRINK (1)
  • Heat-shrink Polyolefin (18)
  • High Conductivity Copper (1)
  • HIGH CONDUCTIVITY WROUGHT COPPER (1)
  • High copper content hard drawn rod (1)
  • Hot Dip Galv (2)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (3)
  • Insulated Nylon (2)
  • Lead (2)
  • LEADED BRONZE ALLOY (2)
  • Linerless EPR (4)
  • Linerless;Rubber (1)
  • Low Carbon Cold Drawn Steel (3)
  • Low Carbon Steel (25)
  • Lumber (2)
  • Malleable Iron (2)
  • Metal (1)
  • Metal/Polypropylene (1)
  • Metal;Polyethylene (Insulator) (1)
  • Natural Nylon 6/6 (1)
  • Nickel Alloy (1)
  • NICKEL PLATED STEEL (1)
  • Non-Adhesive Polyethylene (1)
  • Non-Metallic (1)
  • Nylon (34)
  • NYLON 6 (1)
  • Nylon 6.6 (14)
  • Nylon 6/6 (13)
  • Nylon 66 (3)
  • Nylon 6-6 (3)
  • Nylon 66, Vydyne® 21SPF thermoplastic (1)
  • Nylon Housing, Copper Alloy Contacts (3)
  • Nylon Insulation (15)
  • Nylon Zipper (1)
  • Nylon/Polyamide 6.6 (38)
  • PET (4)
  • Plastic (18)
  • Plastic Housing (3)
  • Plastic/Foil (1)
  • Plastic-Impregnated Cloth (8)
  • Plastisol (1)
  • Poly coated Cloth, Rubber adhesive (1)
  • Polycarbonate (3)
  • Polyester (14)
  • Polyester with Polyester Overlaminate (1)
  • Polyethylene (20)
  • Polyethylene (PE);Polyamide 6 (PA6) (1)
  • Polyethylene Coated Cloth (1)
  • Polyethylene Film (2)
  • Polyethylene with Cotton Webbing (1)
  • Polymer, Butyl Rubber (1)
  • Polyolefin (38)
  • Polypropylene (12)
  • Polyvinyl Chloride (3)
  • Porcelain (1)
  • Pre-Galvanized Steel (5)
  • PVC (1)
  • PVC insulated (1)
  • Rubber (2)
  • Rubber (Adhesive);Polyethylene Over Cloth Scrim (Backing) (1)
  • Rubber Based Elastic Putty (1)
  • Self-Laminating Vinyl (3)
  • Sheet Metal (1)
  • Silicon Bronze (23)
  • Silicone Adhesive (1)
  • Silicone Bronze (1)
  • SILICONE RUBBER (1)
  • Silicone Rubber;Easy Strip Liner;Easy Tear Liner (1)
  • Smooth Plastic (8)
  • Solid Aluminum Foil Core (1)
  • Spring Steel (3)
  • Stainless Steel (56)
  • Stainless Steel - 316 (4)
  • Stainless Steel Type 316 (1)
  • Steel (551)
  • Steel (Blade) (2)
  • Steel (Screw) (5)
  • Steel/Zinc (1)
  • Steel; Spring Steel (1)
  • Thermoplastic (25)
  • THERMOPLASTIC POLYESTER (1)
  • Thermoplastic Rubber (1)
  • TIN PLATED BRASS (1)
  • TIN PLATED COPPER (12)
  • Tin-Plated Aluminum (2)
  • Tin-Plated Copper (77)
  • UV Polyethylene (2)
  • Varnished Cambric (1)
  • Vinyl (71)
  • Vinyl Cloth (12)
  • Vinyl Coated White Cloth (4)
  • Vinyl Film (1)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (2)
  • Vinyl Insulation (36)
  • Vinyl-Impregnated Cloth (7)
  • Weatherable Polyethylene (1)
  • Weather-Resistant Nylon 6.6 (16)
  • Zamac Alloy (10)
  • Zamac Metal (2)
  • Zinc (32)
  • Zinc-Plated Steel Screw (2)
  • Show More...

• Head Style

  

  • Bugle (16)
  • Flat (24)
  • Hex (89)
  • Mushroom (4)
  • Open Eye (3)
  • Pan (3)
  • Round (32)
  • Slotted (4)
  • Slotted;Mushroom (1)
  • Square (5)
  • Wafer (17)
  • Show More...

• Wire Type

  

  • 2 Conductor With Ground (1)
  • 3 Conductor With Ground (1)
  • Al/Cu (4)
  • ALUMINUM/COPPER (4)
  • B,C,D,K,M,I (12)
  • Class A & B (32)
  • Class B & C (85)
  • COPPER (22)
  • CU Wire Only (21)
  • Cu/Cu (2)
  • SOLID (1)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • STRANDED (1)
  • Show More...

• Temperature Rating

  

  • 105 C (32)
  • 105 DEG C (1)
  • 105 DEG C Shell Rated (11)
  • 105° C (3)
  • 122 (10)
  • 131 TO 275 DEG F (1)
  • 135 °C (2)
  • 150 (1)
  • 150 C (3)
  • 150 DEG C (4)
  • 170 (4)
  • 194 (28)
  • 194 Degrees Fahrenheit (90 Degrees Celsius) (1)
  • 194° F (6)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (75)
  • 230 (1)
  • 230 Degrees Fahrenheit (110 Degrees Celsius) (1)
  • 257 (4)
  • 257 Deg F (3)
  • 266 Degrees Fahrenheit (130 Degrees Celsius) (1)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (12)
  • 32 TO 120 DEG F (1)
  • -40 °F - 158 °F (3)
  • -40 F to 250 F (2)
  • -40 To 180 (7)
  • -40 To 300 Deg F (1)
  • -40° C to 135 °C (1)
  • 75 C (9)
  • 90 (13)
  • 90 °C (3)
  • 90 C (190)
  • 90°C (1)
  • 900 DEG F (1)
  • 90c (1)
  • B7613 (1)
  • THREADING MACHINE PIPE PLUG, 1/8 INCH NPT DESIGNATED SIZE; PIPE PLUG; 535, 535-A, 535-M USED ON MODEL/BRAND; PIPE AND BOLT THREADING MACHINE USED ON POWER TOOL; NUMBER OF QUANTITY 2; WARRANTY LIFETIME (1)
  • to 221 F , 105 C (1)
  • up to 90 C (10)
  • Show More...

• Insulation Material

  

  • Copper (1)
  • EPDM Rubber (4)
  • Flame Retardant Polycarbonate (3)
  • Nylon (8)
  • Plastisol (36)
  • Polypropylene (1)
  • PVC (2)
  • Silicon Bronze (1)
  • Silicone Bronze (4)
  • Thermoplastic (17)
  • Vinyl (48)
  • Wemid (10)
  • Show More...

• Thread Size

  

  • #10 (27)
  • #10-12 (1)
  • #10-24 (7)
  • #10-32 (9)
  • #12 (14)
  • #12-24 (2)
  • #14 (5)
  • #6 (23)
  • #6-32 (33)
  • #8 (34)
  • #8-32 (16)
  • 1/2 (1)
  • 1/2 in - 13 (8)
  • 1/2-13 (13)
  • 1/4 (15)
  • 1/4 in - 20 (20)
  • 1/4-20 (29)
  • 10-32 (1)
  • 13 (1)
  • 16 (1)
  • 20 (4)
  • 3/16 (3)
  • 3/4-10 (1)
  • 3/8 (8)
  • 3/8 in - 16 (15)
  • 3/8-16 (25)
  • 32 (17)
  • 5/16 (2)
  • 5/16-18 (2)
  • 6-32 (1)
  • 8-32 (1)
  • Show More...

• Color Code

  

  • BLACK (18)
  • BLUE (18)
  • BROWN (20)
  • GRAY (12)
  • GREEN (11)
  • OLIVE (1)
  • ORANGE (7)
  • PINK (13)
  • PURPLE (7)
  • RED (21)
  • RUBY (1)
  • TAN (2)
  • WHITE (9)
  • YELLOW (11)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Adjoining Terminal (1)
  • Block Fork (1)
  • Butt Splice (3)
  • Compression (38)
  • Compression Lug (3)
  • Compression;Crimp (22)
  • Crimp (6)
  • Disconnect Terminal (7)
  • Distribution Terminal (1)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (18)
  • Insulation Displacement Connector (3)
  • Male Tab (1)
  • Push-In (3)
  • Ring Terminal (9)
  • Ring Tongue (7)
  • Screw (69)
  • Spade Terminal (1)
  • Splice Connector (4)
  • Split (29)
  • Spring (2)
  • Tension (2)
  • Tongue (38)
  • TUBULAR WIRE CLAMP WITH SCREW (1)
  • Twist-On (12)
  • Winged (10)
  • Wire Joints (1)
  • Wire Terminal Disconnect (2)
  • Show More...

• Insulation Color

  

  • Black (44)
  • Black (Code) (3)
  • Black (Die Color) (6)
  • Blue (37)
  • Blue (Code) (13)
  • Blue (Die Color) (5)
  • Blue/Gray (2)
  • Brown (3)
  • Brown (Code) (6)
  • Brown (Die Color) (8)
  • Clear (2)
  • Copper (1)
  • Dark Beige (9)
  • Gray (22)
  • Gray (Code) (5)
  • Gray (Die Color) (5)
  • Green (10)
  • Green (Code) (1)
  • Green (Die Color) (3)
  • Green/Yellow (2)
  • Light Blue (1)
  • Metallic Silver (2)
  • Olive (Code) (1)
  • Orange (12)
  • Orange (Code) (2)
  • Orange (Die Color) (3)
  • Orange/Blue (2)
  • Orange;Red (1)
  • Pink (1)
  • Pink (Code) (3)
  • Pink (Die Color) (3)
  • Purple (6)
  • Purple (Code) (3)
  • Purple (Die Color) (3)
  • Red (29)
  • Red (Code) (2)
  • Red (Die Color) (7)
  • Red/Yellow (3)
  • Red;Blue;Yellow (1)
  • Silver (3)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • Tan;Yellow;Red;Blue (1)
  • White (1)
  • White (Code) (1)
  • Yellow (40)
  • Yellow (Code) (2)
  • Yellow (Die Color) (2)
  • Yellow (Handle) (1)
  • Yellow;Gray (1)
  • Show More...

• Diameter

  

  • #10 (1)
  • #10 AWG (31)
  • #12 AWG (7)
  • #14 AWG (3)
  • #6 AWG (36)
  • #8 (1)
  • #8 AWG (35)
  • 0.105 (3)
  • 0.125 (1)
  • 0.125 in Diameter as Supplied (1)
  • 0.135 (1)
  • 0.16 - 0.44 (1)
  • 0.187 (2)
  • 0.187 in Diameter as Supplied (5)
  • 0.25 (1)
  • 0.25 - 0.75 (1)
  • 0.25 in (1)
  • 0.25 in Diameter as Supplied (3)
  • 0.375 (1)
  • 0.375 in (1)
  • 0.375 in Diameter as Supplied (2)
  • 0.38 (2)
  • 0.5 in (1)
  • 0.5 in Diameter as Supplied (1)
  • 0.63 - 1.0 (1)
  • 0.75-0.75;19.1-19.1 (1)
  • 1 (1)
  • 1.00 - 1.50 (1)
  • 1.27 (1)
  • 1/2 (21)
  • 1/2 in (16)
  • 1/2 in (ID) (7)
  • 1/2 in (ID);1-1/2 in (OD) (2)
  • 1/2 in (ID);1-1/4 in (OD) (1)
  • 1/2 in (ID);1-3/8 in (OD) (1)
  • 1/2 INCH (1)
  • 1/4 (43)
  • 1/4 in (43)
  • 1/4 in (ID) (6)
  • 1/4 in (ID);1 in (OD) (2)
  • 1/4 in (ID);1-1/2 in (OD) (2)
  • 1/4 in (ID);1-1/4 in (OD) (3)
  • 1/4 in (ID);3/4 in (OD) (1)
  • 1/4 in (ID);5/8 in (OD) (1)
  • 1/8 (2)
  • 2.390 x 1.188 x 1.375 in (1)
  • 3/16 (4)
  • 3/16 in (6)
  • 3/16 in (ID);1-1/4 in (OD) (1)
  • 3/8 (36)
  • 3/8 in (18)
  • 3/8 in (ID) (8)
  • 3/8 in (ID);1 in (OD) (1)
  • 3/8 in (ID);1-1/2 in (OD) (2)
  • 3/8 in (ID);1-1/4 in (OD) (2)
  • 3/8 in (ID);7/8 in (OD) (1)
  • 5/16 (5)
  • 5/16 in (1)
  • 5/8 (1)
  • 6 mm (ID) (1)
  • Show More...

• Type

  

  • 2- Nail (4)
  • 2-Wire Standard Version (3)
  • ADHESIVE (3)
  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Pin Adapters (3)
  • Aluminum Splice (15)
  • Aluminum Split Bolts (4)
  • AMS, Dual Rated (5)
  • Anchor (56)
  • Anchor Kit (9)
  • Anchor Setting Tool (5)
  • ATR nut (3)
  • Barricade Tape (7)
  • Beam fasteners (7)
  • BIBD, Multi-Port (4)
  • Bolt (21)
  • Bolted Lugs & Terminals (27)
  • Bracket fastener (3)
  • Braided Expandable Sleeving (4)
  • Breatout Boot (3)
  • Bugle Head Drywall Screw (8)
  • Bugle Head Wood Rocket Drywall Screw (12)
  • Butt Splice (15)
  • Butted (4)
  • CABLE CLAMP (3)
  • Cable Staples (3)
  • Cable Tie (66)
  • Cable Tie Mount (14)
  • Cable/Conduit to Stud (4)
  • Cap Screw (23)
  • Cold Shrink End Cap (4)
  • Cold Shrink Splice (5)
  • Combo nut washer (3)
  • Compression Lug (97)
  • Compression Splice (12)
  • Compression Splice Service Entrance (50)
  • Compression Tap (13)
  • Conduit and Box Support Fastener (8)
  • Conduit fastener (4)
  • Conduit Locknut (4)
  • Conduit to beam fastener (27)
  • Conduit to conduit fastener (3)
  • Conduit to rod fastener (4)
  • Conduit to stud fastener (5)
  • Copper C Taps (3)
  • Copper Connectors (8)
  • Copper Split Bolts (11)
  • Corrugated Loom Tubing (5)
  • Covered Single Wire Ferrule (8)
  • Covers (3)
  • C-Tap (8)
  • C-Taps (5)
  • C-Type Compression Tap (5)
  • Deck Screw (5)
  • DETECTABLE (6)
  • Disconnect (26)
  • Disconnect Connectors (3)
  • Double Primary (6)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Drop in Anchor (5)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • Eye Bolt (5)
  • FENDER WASHER (20)
  • Finished Hex Nut (13)
  • FLAT WASHER (15)
  • Fork Terminal (20)
  • Full Thread Wedge Anchor (14)
  • GAR (24)
  • GB (4)
  • GC (5)
  • GD (4)
  • GENERAL PURPOSE (18)
  • GRC, High Strength (3)
  • Ground Machine Screw (3)
  • Grounding Connector (4)
  • Hammer-On Flange Clips (4)
  • Hanger (12)
  • Hardware & Rough-In (8)
  • HEAT (4)
  • Heat Shrink Label (14)
  • Heat-Shrink Tubing (25)
  • HEAVY DUTY (9)
  • Heavy Wall (17)
  • Hex Bolt (63)
  • Hex Head Concrete Anchor System (6)
  • Hex Head Lag Screw (27)
  • Hex Head Tap Bolt (21)
  • HEX NUT (7)
  • Hex Washer (3)
  • Hexagonal Nut Sleeve Anchor (4)
  • HIGH PERFORMANCE (48)
  • H-Type Compression Tap Connector (11)
  • Inline (7)
  • Inline Splice (10)
  • IN-Line Splicer/Reducer (8)
  • Installation Tool (3)
  • INSULATED (4)
  • Insulated Conductor Connectors (4)
  • Insulating Sleeve (13)
  • Insulation Displacement (10)
  • Insulation Piercing Connectors (3)
  • Integrated Mounting Hole (6)
  • INTERMEDIATE (10)
  • Jack Chain (6)
  • KC and K2C Series (30)
  • K-Lath Screw (6)
  • KS (7)
  • KS, Compact (7)
  • KSU, Universal (9)
  • Label Printers and Labels (4)
  • linerless Ethylene Propylene Rubber (3)
  • LOCK WASHER (12)
  • LOCKING (5)
  • Locking Fork Terminal (12)
  • Long Barrel (62)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (27)
  • Long Barrel - Two Hole (19)
  • Long Barrel, Tin Plated (41)
  • Low Voltage Mounting Plates (8)
  • MACHINE SCREW (102)
  • Machine Screw Hex Nut (4)
  • Machine Screw Kit (4)
  • Mechanical Grounding (13)
  • Mechanical Lug (10)
  • Mechanical Splicer/Reducer (3)
  • Mechanical Split Bolt Connector (15)
  • MINIATURE (4)
  • Molded case circuit breaker accessory (16)
  • Motor Lead Pigtail Splice (6)
  • MOUNTING BASE (13)
  • Multi Cable (16)
  • Mushroom Head with Spring Wing (9)
  • Non-Insulated Ring Terminal (24)
  • Nut (15)
  • Nylon Fully Insulated Female Disconnect (9)
  • Nylon Fully Insulated Male Disconnect (5)
  • Nylon Insulated Butt Connectors (3)
  • Nylon Insulated Butt Splice (4)
  • Nylon Insulated Female Disconnect (7)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (3)
  • Nylon Insulated Ring Terminal (13)
  • Nylon Insulated Wire Joint (4)
  • Offset Pin (7)
  • Oval Head Wall Plate Screw (3)
  • Pan Head Self Drilling Screw (9)
  • PIGTAIL (6)
  • Pipe Wrap (3)
  • Polypropylene Insulated Ferrule (9)
  • Premium (11)
  • Premium Cable Tie (13)
  • Pre-printed Books (4)
  • Pre-Printed Wire Marker Book (4)
  • Printer Ribbon (6)
  • Pull Line Measuring Tape (5)
  • Purlin hanger (5)
  • Push-In (11)
  • QT-III (31)
  • Rejacketing Sleeve (6)
  • RING (11)
  • Ring Terminal (41)
  • Ring Tongue (9)
  • Rod and wire fastener (7)
  • Rod Coupling (12)
  • Rod/Wire (7)
  • ROOF FLASHING (4)
  • Rubber Insulating and Splicing (3)
  • SCREW (6)
  • Screw Gun Brackets and Accessories (5)
  • Secure Grip Wire Connectors (6)
  • Select Purpose (10)
  • Self Drill (24)
  • Self-Laminating Label (3)
  • Service (3)
  • Service Post Connectors (8)
  • Sheet Metal Screw (40)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (16)
  • Single (Thin) Wall (29)
  • Single cable hook (4)
  • Single Primary (5)
  • Single Sided Entry (22)
  • SLEEVE (18)
  • Solid Pin (10)
  • SP (3)
  • Spiral Wrap (13)
  • SPLICE (13)
  • Splice Connector (14)
  • Splicer/Reducer (7)
  • Split-Bolt (27)
  • Spring Nut (4)
  • Square washer (5)
  • Stable (7)
  • Stainless Steel (5)
  • STANDARD (4)
  • Standard Barrel (63)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Barrel, Tin Plated (49)
  • Standard Wire Connectors (9)
  • Strong Tack Adhesive (3)
  • Submersible Pedestal Connectors (9)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (10)
  • Tapping Screw (18)
  • Taps (20)
  • T-bar fastener and spacers (4)
  • Terminal Block (55)
  • Terminal block accessory (12)
  • Terminal block relay (3)
  • Terminals (7)
  • T-Grid Box Hanger Accessories (4)
  • Thin-Wall Flexible Polyolefin (9)
  • Tin Plated Copper Split Bolt (9)
  • Toggle Bolt (4)
  • TP-F (5)
  • Twist-On (20)
  • VINYL (25)
  • Vinyl Insulated Butt Splice (12)
  • Vinyl Insulated Female Disconnect (12)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Locking Spade Terminal (7)
  • Vinyl Insulated Male Disconnect (10)
  • Vinyl Insulated Ring Terminal (52)
  • Vinyl Insulated Spade Terminal (8)
  • Voltage And Conduit, Large (3)
  • Voltage And Conduit, Medium (4)
  • Wafer Head Self Drilling Screw (6)
  • Wall Board Kit (6)
  • Wall Dog Kit (3)
  • WASHER (37)
  • Washer Head Self Drilling Screw (20)
  • Winged Wire Connectors (10)
  • WIRE (4)
  • Wire Marker (4)
  • Wire Marker Books (13)
  • Write-On Dispenser with Tape & Pen (3)
  • Y style toggle hook termination and kit (3)
  • YA-A (5)
  • YAEV, Heavy Duty (5)
  • YC-C Series (5)
  • YS, Long Barrel (18)
  • YS-L, Standard Barrel (10)
  • Zamac Anchor (9)
  • Show More...

• Application

  

  • "For Grounding CFS-1.00/2.20, Jacketed Cable, 1.00 in 2.20 in" (1)
  • "For use with Miniature, Intermediate, & Standard Cable Ties" (1)
  • "Moisture sealing and physical protection for cables, pipes or other cylindrical objects" (4)
  • (1) Clips on Sheet Metal Edges for Fast Mounting of Harness With Cable Ties(2) Allows Cable Tie Entry From All Four Sides for Easy Harness Orientation;Indoor (1)
  • Acoustical, Ceiling and Partitioning; Electrical Fixing and Fastening (4)
  • Appliance and Fixture;Commercial Construction;Communication;Industrial Construction;Maintenance and Repair Operation;Mining;Solar;Utility;Wind Power;Applicable Stand;Motor Leads;Jacket Repairs;Bus Bar Insulation;Moisture-Sealing Electrical Connections (1)
  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kVÂ¥ (25)
  • Asset Tracking;Circuit Board Labeling;Component and Equipment Labeling;Data and Telecommunications Labeling;Electrical Labeling;General Identification;Laboratory Labeling;Wire and Cable Labeling;Facility Identification;Safety Identification (1)
  • BALL-TYPE SWIVEL FIXTURE COVERS FOR PENDANT MOUNTED FIXTURES (2)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Brick, Concrete (2)
  • Brick, Concrete, Mortar, Wood (27)
  • Bricks (5)
  • Bundling;Patching;Sealing (1)
  • Buried Pipes;Cables and Conduits (1)
  • Cable & Wire Marking;Panel Labeling (1)
  • Cable Bundling (9)
  • Cable Tie Entry from All Four Sides, Used with Miniature, and Intermediate Cables Ties;Indoor (2)
  • Caulks, Sealants, Adhesives (1)
  • Clear Insulated Multiple Tap Connectors (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (20)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (33)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (7)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (6)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (26)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (11)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsDatacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (6)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (6)
  • Commercial Construction;Communications;Industrial Construction;Irrigation;Maintenance and Repair Operations;Mining;Residential Construction;Solar;Utility;Wind Power (1)
  • Concrete (1)
  • Concrete Anchor (1)
  • Concrete, Block, Brick, Stone (4)
  • Concrete, Block, Brick, Stone, Light Duty Work (5)
  • Concrete, Brick or Block (1)
  • Concrete, Pipe Hanging, Conduit, Eye Rod, Cable Trays, Lighting Systems, Strut Channels, Overhead Utilities, Sprinkler Systems, Drop Ceilings, HVAC Duct, Electrical, Refrigeration (5)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction;Industrial;Military (12)
  • Corrosion Protection on Conduits;Fittings and Joints (2)
  • Covers wire and cable to protect from abrasion (5)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (23)
  • Datacom and Low Voltage; HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening (2)
  • Datacom and Low Voltage;Electrical Fixing and Fastening (2)
  • Dead-End Self-supporting Drop Wire (3)
  • Decorative Lighting;Flood Light;Patio Lamp (1)
  • designed to seal the jacket end of power cables where elbows or other cable accessories are installed (1)
  • Developing Personal Identification Systems (1)
  • DIRECT BURIAL (1)
  • Drop Ceiling (2)
  • Drywall, Concrete, Brick, Block (3)
  • Drywall, Particle Board, Wood (12)
  • Drywall, Wood, Aluminum (8)
  • Dual-Rated Connector (1)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (37)
  • Electrical (17)
  • Electrical Fixing and Fastening (6)
  • Electrical Fixing and Fastening; Acoustical, Ceiling and Partitioning (5)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (19)
  • Electrical Fixing and Fastening; HVAC, Plumbing and Refrigeration; Datacom and Low Voltage (2)
  • Electrical Labeling;Wire and Cable Labeling (16)
  • Electrical Maintenance;Appliance and Fixture;Automotive and Marine;Commercial Construction;Industrial Construction;Irrigation;Maintenance and Repair Operations;Mining;Solar;Utility;Wind Power (1)
  • Electrical Maintenance;Appliance And Fixture;Commercial Construction;Industrial Construction;Irrigation;Maintenance (1)
  • Facility Identification;Safety Identification (1)
  • Fastens to surface with a hammer. (2)
  • For 1/2 IN Drywall, Ceiling (1)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For All Combinations Of Copper, Aluminum, ACSR, AAAC, 5005, And Steel (9)
  • For Aluminum And Copper Conductors (17)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (15)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors. Use as a low tension reducing sleeve for Insulated Conductor (6)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (7)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (12)
  • For Device Grounding Applications (2)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (6)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Applications In Earth Or Concrete, Copper (7)
  • For Direct Burial Cables (15)
  • For Direct Burial In Earth And Concrete (11)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (7)
  • For Dry Locations (16)
  • For Dry Locations;Insulating and protecting wires and cables (8)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For flat applications (1)
  • For Grounding And Bonding Applications (5)
  • For hanging rod (2)
  • For high temperature applications over 105 degree C (1)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (5)
  • For Indoor And Outdoor Use (2)
  • For Indoor Use Only (2)
  • For Indoor Use Only, Copper Or Stranded Aluminum (5)
  • For Joining A Range Of Cable To Copper Clad, Galvanized Steel, And Stainless Steel Ground Rods, Direct Burial Applications In Earth And Concrete (3)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (22)
  • For Joining A Range Of Parallel Copper Cables Perpendicular To Rod, Pipe Or Column, Direct Burial In Earth Or Concrete (2)
  • For Joining A Range Of Two Parallel Copper Cables To Rod Or Pipe And Burial In Ground Or Concrete (4)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Joining Three Equal Copper Cables To Rod Or Tube, Direct Burial In Earth Or Concrete (2)
  • For MA5 Machine Screw Anchor (1)
  • For Making Tap Or Parallel Copper Connections (3)
  • For quickly connecting or disconnecting a terminal (3)
  • For Range Of Copper And Making Tap Or Parallel Copper Connections (2)
  • For Removing Metal And Can Be Used In Heavier Gauge Metals (33)
  • For Roof Line and Service Entrance Conduit or Ventilation Pipe (2)
  • For securing Contractor, DIY, Landscape Maintenance, recreational loads and more. (1)
  • For Service Entrance Cable And Conduit (5)
  • For Standard Conductor Splice (13)
  • For Suspending Fixtures (2)
  • For Two Copper Cables To Bar And Direct Burial In Concrete Or Ground (1)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use on aluminum conductors (6)
  • For use on copper conductors (1)
  • For use on Type AN aircraft cable, extra flexible conductors and commercial (Code) conductors.;Aircraft, Industrials, Hospitals, Utilities, Marine, Computer industries (1)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (1)
  • For Use With Copper And Aluminum Conductors (5)
  • For use with inline compression connectors (1)
  • For use with non-metallic cable (8)
  • For Used To Couple Threaded Rod For Extended Lengths (3)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (24)
  • For Used To Hang Fixtures Suspended From Chain (2)
  • For Used To Write On Cardboard, Concrete, Lumber (Rough Or Smooth), Metal, Paper And Plastic (2)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (6)
  • General (14)
  • General Purpose (55)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • General Purpose;Indoor;Outdoor;Cable Harnessing;Wire Harnessing (4)
  • General Use (2)
  • Grounding and Bonding Applications (9)
  • Grounding Application (3)
  • Grounding Wire (8)
  • Hardware For Lugs (4)
  • Harness Multiple Cables Into a Single Manageable Bundle; Allows Breakouts of Single/Multiple Cables; Provides Abrasion Protection for Wire, Cables, Hoses, and Tubing (6)
  • Harsh Environment (6)
  • Hazardous Area (1)
  • Hazardous Area;Industrial Construction;Residential Construction;Maintenance and Repair Operations;Communications;Irrigation;Commercial Construction;Mining;Wind Power;Solar;Utility (2)
  • Heavy Duty (1)
  • Hollow Walls (9)
  • Home Use;Do-It-Yourself Home Improvements;Automotive;Plumbing;Sporting Equipment;Equipment Identification (1)
  • Ideal for in-line splicing applications (1)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Ind Facilities & Factories - Industrial Facilities/Factories - OtherGeneration - Conventional Energy - Conventional EnergyInd Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketOther IT and Datacom - Other InfrastructuresCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherGeneration - Renewable Energ (1)
  • Ind Facilities & Factories - Mfg. Process Electrification and Control (1)
  • Indoor (20)
  • Indoor/Outdoor (3)
  • Indoor;Low Profile Super-Grip ™ Adhesive Backed Cable Tie Mounts, Used Where Space is Limited, to Keep Bundle Close to Mounting Surface and with Super-Grip ™ Cable Ties (1)
  • Indoor;Outdoor (8)
  • Indoor;Outdoor;Industrial (1)
  • Indoor;Right Angle Mounts Holds Cable Bundles Away from the Sharp Edges of Bulkheads or Cabinet Holes. Can Also be used to Mount Cable Bundles Adjacent to Any Surface (1)
  • Indoor;Used with Miniature, Intermediate, and Standard Cables Ties (4)
  • Industrial (4)
  • Industrial Construction;Residential Construction;Maintenance And Repair Operation;Communication;Automotive And Marine;Irrigation;Commercial Construction;Mining;Appliance And Fixture;Wind Power;Solar;Utility (1)
  • Industrial Spec Grade (2)
  • Industrial;Labeling Wire;Cable and Rounded Surface (2)
  • Industrials, Hospitals, Utilities, Marine, Computer (6)
  • Insulate Connections Up to 600V. Smooth Bus Bar Irregularities. (1)
  • Insulate Moisture-Seal;Pad Connections Up to 600 V;Indoor;Outdoor (2)
  • Insulate motor stub splices quickly and dependably (1)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (38)
  • Insulating or Joining 2 or more conductors (19)
  • insulating wire splices, split bolt connections, and motor leads up to 600V (1)
  • Light Duty Aluminum and Steel Metal to Metal Applications (1)
  • Light Fixtures (2)
  • Low Voltage;Electrical Insulation;Harnessing of Wire/Cable (1)
  • MARINE (2)
  • Marking Wire and Cable (4)
  • Measuring Conduit (1)
  • Metal into Concrete (2)
  • Military Specification No. Mil-I-19166C;UL Recognized Component listing for 200°C (Guide OANZ2;File E17385);CSA Accepted Component 180°C;File LR93411 (1)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (1)
  • Mortar Joints, Poured Concrete, Brick, Concrete Blocks (2)
  • Multi-Purpose (1)
  • NA (2)
  • Non-Galvanized Metal;Steel;Masonry;Wood;Machinery;Motors;Tools;Cabinets;Toolboxes;Steel Bars;Pipelines;Drums;Conduit;Ducts;Furniture and Ideal for Marking Hazard Area (1)
  • Non-Indicating (1)
  • NSI (58)
  • one-piece self drilling anchor designed for use ni hollow gypsum wallboard for light to medium dury loads (2)
  • OSB;Cinder Block;Concrete (4)
  • Other (29)
  • OtherInd Facilities & Factories - Facility: Power Distribution and Control (1)
  • Outdoor (14)
  • Overhead Tension Connection (2)
  • PanTher(TM) LS8E;Cougar(TM) LS9 Hand-Held Thermal Transfer Printers (1)
  • Paper;Food And Beverage;Medical;General Industrial;Mro;Electronics;Print;371 Model (1)
  • Patching;Bundling;Reinforcing;Tabbing;Taping/Splicing Insulation;Capping Pipe;Securing Conduit End;Marking;Labeling;Temporary Repair;Heating;Ventilating and Air Conditioning (1)
  • Pipe Joint;Conduit;Coupling (2)
  • Pipe, Joints, Conduit and Couplings (1)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (7)
  • Power Control;Fiber Optic;Electronic Telecommunications;Instrumentation;Automotive (1)
  • Premium (10)
  • Premium Grade (2)
  • Premium Grade;Phase Identification and Marking. (8)
  • Primary Electrical Insulation for Splicing all Solid Dielectric Cables Through 69 kV. (3)
  • Primary Insulation for Splices Up to 600v. Protective Jacketing (3)
  • Professional;Premium Grade (2)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (6)
  • Protective Jacketing and Harnessing;General Purpose;Indoor/Outdoor;Cable/Wire Harnessing (1)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (3)
  • Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; Highly Flexible Open Weave will not Trap Heat or Humidity; Allows for Use with Irregular Shapes (2)
  • Provides terminating point for a group of wires running in one direction (4)
  • Residential (1)
  • Residential and commercial wiring jobs (6)
  • Residential or Commercial (1)
  • Screws, Bolts, General Use (12)
  • Sealing;Holding;Bundling (2)
  • Snaps into a Regular Bushing to make a UL Listed Insulated Bushing (12)
  • Soft Concrete (4)
  • Splicing Cable;Building Stress;Jacketing;Bus Bar;Sealing (1)
  • Splicing Wire (36)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (27)
  • Stranded Aluminum or Copper Code Conductor (9)
  • Switchboards;Panel Boards;Industrial Control Panels;Motor Control Centers (1)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (2)
  • Terminate "upsized" conductor and/or fine strand conductor into mechanical connectors found in molded case circuit breakers, panel board equipment, and other switchgear. (2)
  • Terminate, Splice, Tap Power Connectors (140)
  • Terminate-Splice-Tap (3)
  • The conical plastic anchor is a light-duty part that can be used in drywall, concrete, and hollow block or brick. (1)
  • They Are a Reliable and Cost Effective Solution for Securing Wire Harnesses in The Automotive, Marine, White Goods, Heavy Equipment and Mass Transit-Rail Markets (1)
  • To Protect and Prevent Wires and Cables from Chafing Against Sharp Edges of Panel Walls and Knockouts. (1)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (1)
  • Use with MA7 (1)
  • Use with MA8 (1)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (5)
  • Used to Attach Non Metallic Cable or BX (Armored) Cable, RX Series is used for Romex(R) (1)
  • Used to bundle and secure wire and cable. (2)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Used to Strap or Support Pipe, Ducts & Other Fastening Applications (2)
  • Utility/Ground Grid (13)
  • Wall Plates (3)
  • Wallboard, Plywood, Concrete, Hollow or Grout Filled Block, Brick and Plaster (3)
  • Wire and Cable Labeling (4)
  • Wire Identification (2)
  • Wire Labeling (3)
  • Wire Marking (6)
  • Wire Retainer (3)
  • Wire Splice (28)
  • Wire Splicing (6)
  • Wire Termination (336)
  • Wire Termination and Insulation (1)
  • Wood (3)
  • Writing Instrument (1)
  • Show More...

• Mounting

  

  • # 10 Mounting Hole (1)
  • .114 Mounting Holes (1)
  • .142 Mounting Holes (1)
  • .225 Mounting Holes (1)
  • 0.25 (2)
  • 0.28 (3)
  • 0.31 (15)
  • 0.37 (1)
  • 0.38 (1)
  • 0.39 (1)
  • 0.47 (1)
  • 0.62 (2)
  • 0.63 (1)
  • 1 (5)
  • 1.1 cm Oval Mounting Hole (1)
  • 1.13 (2)
  • 1/2 Mounting Hole (14)
  • 1/2 Mounting Holes (24)
  • 1/2 Mountng Holes (1)
  • 1/4 (1)
  • 1/4 Mounting Hole (8)
  • 1/4 Mounting Holes (4)
  • 1/4 Mountinng Hole (1)
  • 11/16 (1)
  • 1-1/16 (4)
  • 1-1/2 (2)
  • 1-1/4 (9)
  • 1-1/8 (18)
  • 1-11/16 (3)
  • 1-13/16 (1)
  • 1-3/16 (2)
  • 15/16 (11)
  • 15/32 (3)
  • 1-5/8 (5)
  • 1-7/16 (4)
  • 17/32 (1)
  • 1-9/16 (7)
  • 1932-09-01 (10)
  • 2 Mounting Holes (18)
  • 2-15/16 (1)
  • 2-3/4 (1)
  • 2-5/16 (1)
  • 2-5/8 (1)
  • 3/4 (3)
  • 3/8 (6)
  • 3/8 Mountign Hole (1)
  • 3/8 Mounting Hole (17)
  • 3/8 Mounting Holes (1)
  • 5/16 (41)
  • 5/16 Mounting Hole (4)
  • 5/8 (6)
  • 5/8 Mounting Hole (2)
  • 7/16 (10)
  • 7/32 (5)
  • 7/8 (9)
  • 9/16 (4)
  • 9/32 (13)
  • Adhesive (4)
  • Adhesive Tape (11)
  • Adhesive/Screw (1)
  • Beam (3)
  • Bottom Mount (2)
  • Ceiling Grid (1)
  • CHANNEL (11)
  • Clamp (3)
  • DIN 3 (1)
  • DIN RAIL (1)
  • Edge Clip (1)
  • End-Section (Channel Mount) (1)
  • Fir Tree Mount (1)
  • Hammer-in (3)
  • Heavy Cross Section MLT Cable Ties (1)
  • None (60)
  • One screw (1)
  • SCREW (3)
  • Screw or Nail fastening (1)
  • Screw-on (4)
  • Self Adhesive (2)
  • Self Stick (1)
  • Self-Adhesive (7)
  • Side Mount (2)
  • Snap In Mount (2)
  • Stick (1)
  • SURFACE (1)
  • Switch (2)
  • Three screw (1)
  • Top Mount (1)
  • UL (Canada and US) (1)
  • Wooden Stud (7)
  • Yes (3)
  • Show More...

• Tensile Strength

  

  • 10 lb (1)
  • 11 (1)
  • 11 lb/in (1)
  • 11;50 (1)
  • 12 lb/in (1)
  • 120 (23)
  • 120 lb (1)
  • 120 lb/530 N (7)
  • 120 lb/534 N (4)
  • 120;534 (6)
  • 1250 (1)
  • 1250 lb (1)
  • 14 lb/in (1)
  • 140 (1)
  • 144 (2)
  • 1475 (1)
  • 15 (10)
  • 15 lb (1)
  • 1500 psi (2)
  • 17 (10)
  • 17 lb/in (14)
  • 175 (3)
  • 175 lb/778 N (2)
  • 175 lb;800 Nm;79.379 kg (1)
  • 18 (14)
  • 18 lb/80 N (4)
  • 18 lb;8.165 kg (3)
  • 18 lb;80 Nm;8.165 kg (1)
  • 180 lb/in (1)
  • 1800 (1)
  • 19.8 (10)
  • 20 (2)
  • 20 lb/in (4)
  • 200 (4)
  • 2200 psi;15.0 MPa (1)
  • 2400 psi (20)
  • 25 (1)
  • 25 lb/in (1)
  • 250 (8)
  • 250 psi;1.72 MPa (1)
  • 250;1112 (1)
  • 2500 lb (3)
  • 29 (1)
  • 30 (2)
  • 30 lb (1)
  • 30 lb/135 N (5)
  • 30;135 (1)
  • 300 (1)
  • 333.6 (3)
  • 35 lb/in;15000 psi (1)
  • 40 (25)
  • 40 lb (1)
  • 40 lb/178 N (8)
  • 40;178 (2)
  • 40;180 (1)
  • 400 (1)
  • 42 lb/in (4)
  • 4400 psi (4)
  • 450 (2)
  • 450;2002 (2)
  • 47.3 N/cm;432 oz/in (1)
  • 50 (41)
  • 50 lb (1)
  • 50 lb/220 N (8)
  • 50 lb/222 N (4)
  • 50 lb;220 Nm;22.68 kg (7)
  • 50;222 (6)
  • 580 (1)
  • 7 (1)
  • 7.5 lb/in (3)
  • 74 (2)
  • 90;400 (1)
  • Show More...

• Die Index

  

  • 10 (11)
  • 1011 (4)
  • 11 (7)
  • 12 (10)
  • 13 (11)
  • 14 (8)
  • 15 (8)
  • 16 (5)
  • 17 (4)
  • 18 (7)
  • 19 (3)
  • 19/470 (1)
  • 20 (9)
  • 22 (5)
  • 24 (6)
  • 27 (1)
  • 296 (2)
  • 297 (1)
  • 298 (2)
  • 299 (2)
  • 300 (2)
  • 348 (1)
  • 38 (1)
  • 39 (1)
  • 40 (2)
  • 41 (1)
  • 43 (1)
  • 435 (2)
  • 44 (1)
  • 45 (1)
  • 467 (1)
  • 472 (1)
  • 473 (1)
  • 49 (8)
  • 7 (11)
  • 8 (12)
  • 9 (2)
  • 997 (9)
  • 997;998 (1)
  • 998 (3)
  • BG OR 5/8 (1)
  • C (3)
  • E or O (1)
  • F or D3 (1)
  • KR (1)
  • O (2)
  • Show More...

• Length

  

  • 0.33 (1)
  • 0.37 (1)
  • 0.5 in (3)
  • 0.56 INCH (1)
  • 0.6 (1)
  • 0.6 in (2)
  • 0.75 in (2)
  • 0.75 in;19.05 mm (1)
  • 0.8 (3)
  • 0.94 (1)
  • 0.99 in (1)
  • 0.99 in;25 mm (1)
  • 1 (72)
  • 1 in (25)
  • 1.06 (2)
  • 1.12 in;28.6 mm (1)
  • 1.125 in;28.58 mm (2)
  • 1.16 (1)
  • 1.25 (2)
  • 1.26 in (1)
  • 1.37 (1)
  • 1.37 in (4)
  • 1.375 in;34.9 mm (1)
  • 1.38 (3)
  • 1.38;34.9 mm (2)
  • 1.5 (2)
  • 1.5 m (3)
  • 1.75 in;44.45 mm (1)
  • 1.82 (1)
  • 1.85 (17)
  • 1/2 (28)
  • 1/2 in (23)
  • 1/4 in (1)
  • 10 (3)
  • 10 ft (1)
  • 10 ft;3 m (1)
  • 10.9 (3)
  • 100 (21)
  • 100 ft (6)
  • 100 ft , 30.48 m (3)
  • 100 ft;30.5 m (1)
  • 100 m (1)
  • 1000 (1)
  • 1000 ft (2)
  • 1000 ft;304.8 m (4)
  • 1000 ft;305 m (1)
  • 102 mm (1)
  • 11 (1)
  • 11.000000000000000 (3)
  • 11.08 in;284.4 mm (2)
  • 11.1 (1)
  • 11.1 in (1)
  • 11.1 in;282 mm (2)
  • 11.3 (2)
  • 11.400000000000000 (1)
  • 11.5 (2)
  • 11.6 (2)
  • 11.64 mm (1)
  • 11.75 (1)
  • 11.77 in;299 mm (2)
  • 11.8 (2)
  • 11.81 (3)
  • 11/16 in (1)
  • 1-1/16 INCH (2)
  • 1-1/2 (54)
  • 1-1/2 in (7)
  • 1-1/2 INCH (1)
  • 1-1/4 (53)
  • 1-1/4 in (17)
  • 1-1/8 (5)
  • 1-1/8 in (3)
  • 11-1/2 ft (2)
  • 12 (2)
  • 12 ft (2)
  • 12.000000000000000 (1)
  • 12.5 ft (1)
  • 120 (2)
  • 1200 (3)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 (6)
  • 1-3/4 (3)
  • 1-3/4 in (1)
  • 1-3/8 in (3)
  • 14 (3)
  • 14.2 (7)
  • 14.2 in;360.5 mm (2)
  • 14.284 in;362.81 mm (1)
  • 14.287 in;362.9 mm (2)
  • 14.3 (5)
  • 14.49 (3)
  • 14.57 (2)
  • 14.570000000000000 (1)
  • 14.6 in;371 mm (2)
  • 14.655 in;372.24 mm (2)
  • 14.9 (4)
  • 144 (2)
  • 15 ft;4.6 m (1)
  • 15.1 (3)
  • 15.1 in;384 mm (1)
  • 1-5/16 INCH (1)
  • 1-5/8 (6)
  • 1-5/8 INCH (2)
  • 1500 ft (2)
  • 17.611 in;447.32 mm (1)
  • 1-7/16 in (1)
  • 1-7/8 in (2)
  • 18 in;457 mm (2)
  • 18.000000000000000 (1)
  • 18.1 (1)
  • 180 in (1)
  • 1-9/16 (1)
  • 2 (45)
  • 2 in (25)
  • 2.37 (2)
  • 2.390 in (1)
  • 2.5 in (2)
  • 2.75 (2)
  • 20.5 (3)
  • 200 (6)
  • 2-1/2 (14)
  • 2-1/2 in (4)
  • 2-1/4 (4)
  • 2-1/4 in (2)
  • 22 ft;6.7056 m (1)
  • 22.2 (1)
  • 23.4 (1)
  • 23.611 in;599.72 mm (1)
  • 23.62 (2)
  • 23.946 in;608.22 mm (1)
  • 2-3/4 (4)
  • 24 in;610 mm (1)
  • 24.3 in;617 mm (1)
  • 24.4 (1)
  • 24.900000000000000 (1)
  • 2400 (1)
  • 25 ft (3)
  • 25 ft (Tape);3.5 in;88.9 mm (1)
  • 25 ft (Tape);6.5 in;165.1 mm (1)
  • 25.250000000000000 (1)
  • 27 (1)
  • 3 (14)
  • 3 in (13)
  • 3.5 (1)
  • 3.6 (5)
  • 3.62 in;91.95 mm (2)
  • 3.94 in;100.08 mm (2)
  • 3/32 in (1)
  • 3/4 (45)
  • 3/4 in (13)
  • 3/8 (4)
  • 3/8 in (5)
  • 30 (5)
  • 30 ft;9 m (1)
  • 30 ft;9.1 m (5)
  • 30.34 in;770.61 mm (1)
  • 30.7 (3)
  • 3000 ft (2)
  • 3-1/2 (3)
  • 3-1/4 (3)
  • 3-1/4 in (1)
  • 3-3/4 (2)
  • 36 yd;32.9184 m (2)
  • 36.376 in;923.37 mm (1)
  • 39.3 (1)
  • 4 (18)
  • 4 ft (12)
  • 4 ft;1.2 m (3)
  • 4 in (2)
  • 4.1 in (1)
  • 4.1 in;104 mm (1)
  • 4.5 (4)
  • 400 (2)
  • 4-1/2 (3)
  • 4-1/2 in;0.1 m (1)
  • 44 ft;13.4112 m (1)
  • 4500 (1)
  • 48 in;121.9 mm (5)
  • 5 (9)
  • 5 in (2)
  • 5.4 (6)
  • 5.51 (2)
  • 5.51 in;140 mm (2)
  • 5.6 (1)
  • 5.6 in (1)
  • 5/16 (1)
  • 5/8 in (2)
  • 50 (1)
  • 50 yd (1)
  • 50 yd;45.7 m (1)
  • 5-1/2 in (5)
  • 55 m;60 yd (2)
  • 55 yd (1)
  • 6 (4)
  • 6 in;15.2 mm (1)
  • 6 INCH (1)
  • 6.1 (4)
  • 6.1 in (2)
  • 6.38 (1)
  • 6.5 (1)
  • 6.6 (1)
  • 60 (22)
  • 60 ft (4)
  • 60 ft;18.288 m (1)
  • 60 ft;18.3 m (1)
  • 60 in (1)
  • 60 yd (2)
  • 600 (1)
  • 609.9 m;2000 ft (1)
  • 66 (11)
  • 66 ft (4)
  • 66 ft;20.1 m (9)
  • 66 ft;20.1168 m (4)
  • 7 (2)
  • 7.2 (7)
  • 7.31 in;185.67 mm (2)
  • 7.31 in;186 mm (1)
  • 7.4 (4)
  • 7.435 in;188.85 mm (2)
  • 7.5 in (2)
  • 7.6 in;193 mm (3)
  • 7.800000000000000 (3)
  • 7.87 (2)
  • 7.9 (3)
  • 7.99 (1)
  • 7/16 (2)
  • 7/16 in (1)
  • 7/8 (4)
  • 7/8 in (2)
  • 72 (1)
  • 72513 (2)
  • 75 (2)
  • 8 (14)
  • 8 ft;2.4 m (1)
  • 8 in (2)
  • 8.000000000000000 (1)
  • 8.1 in;205.70 mm (2)
  • 8.2 (2)
  • 8.350000000000000 (1)
  • 8.4 in (1)
  • 8.46 (2)
  • 8.46 in;215 mm (2)
  • 8.5 (2)
  • 80 in (1)
  • 82.5 ft (1)
  • 9 (3)
  • 9 in;22.9 mm (2)
  • 9/16 in (2)
  • 96 in;2.43 m (1)
  • NA (10)
  • Show More...

• Minimum Conductor Size

  

  • #1 AWG (Stranded) (1)
  • #1/0 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (3)
  • #10 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (Stranded and Solid) (1)
  • #10 AWG (Stranded) (1)
  • #10 AWG (Stranded);#10 AWG (Solid);6 sq.mm (Stranded) (1)
  • #12 AWG (25)
  • #12 AWG (Solid);#14 AWG (Stranded) (1)
  • #14 AWG (30)
  • #14 AWG (Copper Tap Range);#1 AWG (CopperWeld Solid Run Size);#6 AWG (Copper Stranded Run);#3 #7-5D (CopperWeld Stranded Tap Size);#14 AWG (Copper Solid Tap);#1 AWG (CopperWeld Solid Tap Size);#6 AWG (Copper Solid Run Size);#3 #7-5D (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap Range);2/0 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Stranded Run);#5D (CopperWeld Stranded Tap Size);#14 AWG (Copper Solid Tap);2/0 AWG (CopperWeld Solid Tap Size);#4 AWG (Copper Solid Run Size);#4 AWG (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap);#2 AWG (CopperWeld Solid Run Size);#6 AWG (Copper Stranded Run);#14 AWG (Copper Solid Tap);#2 AWG (CopperWeld Solid Tap Size);#6 AWG (Copper Solid Run Size);3#8 AWG (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap);#8 AWG (CopperWeld Solid Run Size);#8 AWG (Copper Stranded Run);#14 AWG (Copper Solid Tap);#8 AWG (Copper Solid Run Size) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#12 AWG (Stranded Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#8 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Solid) (1)
  • #14 AWG (Stranded) (9)
  • #14 AWG (Stranded);#12 AWG (Solid) (2)
  • #16 AWG (12)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #18 AWG (6)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Range of Equal Main and Tap-Solid) (1)
  • #2 AWG (Run and Tap-Stranded or Solid) (1)
  • #2 AWG (Stranded) (3)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #20 AWG (1)
  • #20 AWG (Stranded) (1)
  • #22 AWG (9)
  • #22 AWG;#18 AWG (1)
  • #22 AWG;0.34 mm2 (1)
  • #24 AWG (3)
  • #26 AWG (9)
  • #3 AWG (1)
  • #4 AWG (12)
  • #4 AWG (Range for Equal Main and Tap-Solid) (1)
  • #4 AWG (Stranded) (7)
  • #6 AWG (36)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Range of Equal Main and Tap-Solid) (1)
  • #6 AWG (Run and Tap1);16 sq.mm (Run and Tap1);#14 AWG (Tap2 and Tap3);2.5 sq.mm (Tap2 and Tap3) (1)
  • #6 AWG (Stranded Main);#6 AWG (Stranded Tap);#8 AWG (Stranded Main) (1)
  • #6 AWG (Stranded) (18)
  • #8 AWG (6)
  • #8 AWG (Range for Equal Main and Tap);#12 AWG (Minimum Tap with Maximum Main) (1)
  • #8 AWG (Range for Equal Main and Tap-Solid) (1)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #10 AWG;(1) #12 AWG (1)
  • (2) #12 AWG (1)
  • (2) #14 AWG (5)
  • (2) #16 AWG (2)
  • (2) #18 AWG (12)
  • (2) #20 AWG (2)
  • (2) #22 AWG (3)
  • (3) #12 AWG (1)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (3)
  • (4) #14 AWG (1)
  • 0.08 mm^2;28 AWG (2)
  • 14 AWG STRANDED (1)
  • 16 AWG (1)
  • 2/0 AWG (Run and Tap-Stranded) (1)
  • 2/0 AWG (Run-Stranded);#8 AWG (Tap-Stranded) (1)
  • 20 AWG (1)
  • 22 AWG (1)
  • 250 kcmil (Main);150 m2 (Main);70 m2 (Tap);1/0 AWG (Stranded-Tap) (1)
  • 250 kcmil (Range for Equal Main and Tap) (1)
  • 250 MCM (6)
  • 26 AWG (5)
  • 3/0 AWG (Run and Tap-Stranded or Solid) (1)
  • 4/0 AWG (1)
  • 4/0 AWG (Run-Stranded);#6 AWG (Tap-Stranded or Solid) (1)
  • 4/0 AWG (Run-Stranded);2/0 AWG (Tap-Stranded) (1)
  • 400 kcmil (Range for Equal Main and Tap) (1)
  • 6/1 AWG (ASCR);2/0 AWG (AAAC);2/0 AWG (AAC) (1)
  • Show More...

• Wire Size

  

  • #10 (36)
  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG (1)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • #14 (28)
  • #14 AWG (1)
  • #14 AWG/2.5 mm2 (1)
  • #14-1/0 AWG (1)
  • #16 (2)
  • #18 (13)
  • #18 AWG (2)
  • #20-6 AWG (1)
  • #24-16 AWG (1)
  • #24-8 AWG (3)
  • #26-10 AWG (11)
  • #26-12 AWG (1)
  • #26-8 AWG (1)
  • #4 to 4/0 AWG (Main);#14 to #4 AWG (Tap) (1)
  • #6 (4)
  • #8 (4)
  • (1) 1000-250 MCM(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(LINE) - (1) 2/0-14 AWG(LOAD) (1)
  • (1) 2/0-14 AWG(Line) - (4) 4-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 2-14 AWG(Line) - (1) 2-14 AWG(Load) (1)
  • (1) 250 MCM-6 AWGG(Line) - (1) 250 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (1) 350 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (1) 500 MCM-4 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (4) 4/0-6 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) #26-12 AWG (1)
  • (2) 2/0-14 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (2) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 2-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (2) 350 MCM-6 AWG(Line) - (2) 350 MCM-6 AWG(Load) (1)
  • (2) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(Line) - (2) 500 MCM-4 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(LINE) - (4) 4/0-6 AWG(LOAD) (1)
  • (2) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (3) #26-12 AWG (5)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.125 in Dia x 2 in W (1)
  • 0.125 in Dia x 7 ft L (1)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.187 in Dia x 2 in W (1)
  • 0.25 in Dia x 1 in W (1)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 2 in W (1)
  • 0.375 in Dia x 1 in W (1)
  • 0.375 in Dia x 2 in W (1)
  • 0.375 in Dia x 7 ft L (1)
  • 0.38 (3)
  • 0.5 in Dia x 1 in W (1)
  • 1 in Dia x 2 in W (1)
  • 1 SOL - 2/0 STR (1)
  • 1 SOL - 4/0 STR (1)
  • 1.27 (1)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (10)
  • 1/0-8 AWG (1)
  • 10 (1)
  • 10 AWG (1)
  • 10 SOL - 2 STR (1)
  • 10 SOL - 6 SOL (1)
  • 10 STR - 6 STR (1)
  • 11 (1)
  • 12 (3)
  • 12 - 10 AWG (2)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (3)
  • 12 AWG (2)
  • 12-10 AWG (1)
  • 12-10 AWG (65)
  • 12-14 AWG (2)
  • 14 (1)
  • 14 AWG (1)
  • 14 STR - 8 STR (1)
  • 14-8 AWG (1)
  • 16 (2)
  • 16 - 14 AWG (1)
  • 16 AWG (2)
  • 16 STR - 8 STR (1)
  • 16-10 AWG (3)
  • 16-14 AWG (29)
  • 18 AWG (1)
  • 18 TO 6 AWG (CE), 18 TO 4 AWG (COPPER) (1)
  • 18-10 AWG (1)
  • 18-14 AWG (25)
  • 18-17 AWG (1)
  • 1mm2 (2)
  • 2 AWG (2)
  • 2 SOL - 2 STR (1)
  • 2 SOL - 2/0 STR (2)
  • 2 SOL - 3/0 STR (1)
  • 2/0 STR - 350 MCM (1)
  • 2/0-14 AWG (5)
  • 20 (1)
  • 20 AWG (1)
  • 22 - 10 (6)
  • 22 - 12 (2)
  • 22 - 18 (3)
  • 22 - 18 AWG (1)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-10 (1)
  • 22-10 AWG (1)
  • 22-10 AWG (30 Amp) - 18-14 AWG (20 Amp) (1)
  • 22-10, 22-18 (1)
  • 22-12 AWG (20 Amp) - 20-18 AWG (10 Amp) (1)
  • 22-14 AWG (2)
  • 22-16 AWG (22)
  • 22-18 AWG (15)
  • 22-18, 16-14, 12-10 AWG (1)
  • 24 (1)
  • 250 - 500 MCM (1)
  • 250 MCM-6 AWG (13)
  • 3/0 SOL - 4/0 STR (1)
  • 3/0 STR - 350 MCM (1)
  • 3/0 STR - 500 MCM (1)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 4 AWG (3)
  • 4 SOL - 1/0 STR (2)
  • 4 STR - 2 STR (1)
  • 4 STR - 3/0 STR (1)
  • 4 to 14 AWG (1)
  • 4/0 STR - 350 MCM (1)
  • 4-14 AWG (9)
  • 500 MCM-4 AWG (11)
  • 6 AWG (10)
  • 6 SOL - 1/0 STR (2)
  • 6 SOL - 2 SOL (1)
  • 6 SOL - 2 STR (1)
  • 6 STR - 2/0 SOL (1)
  • 6 STR - 4/0 SOL (1)
  • 600 MCM-6 AWG (5)
  • 7 (1)
  • 750-250 MCM (7)
  • 78181040872 (1)
  • 8 AWG (11)
  • 8 SOL - 1/0 STR (1)
  • 8 SOL - 2 STR (1)
  • 8 SOL - 4 SOL (1)
  • Main .204 to .162 in , Tap .128 to .204 in (1)
  • Main 2 ACSR 1-2 STR - Tap 2 ACSR 1-2 STR (1)
  • Main: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG (1)
  • Main: #3 to #6 ACSR or #2 to #6 STR or #1 to #4 SOL AWG , Tap: #8 to #14 STR or #8 to #14 SOL AWGp: #8 to #14 STR AWG , #8 to #14 SOL AWG (1)
  • Main: 1/0 to #2 ACSR or 2/0 to #1 STR AWG , Tap: 1/0 to #2 ACSR or 2/0 to #2 STR AWG (1)
  • Main: 1/0 to #3 ACSR or 2/0 to #2 STR or 3/0 to #1 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 1/0 to #4 ACSR or 2/0 to #3 STR or 2/0 to #2 SOL AWG , Tap A: #8 to #10 STR or #6 to #10 SOL AWG , Tap B: #12 to #14 STR or #12 to #14 SOL AWG (1)
  • Main: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 4/0 to 2/0 SOL AWG , Tap: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Main: 2/0 to 1/0 ACSR or 3/0 to 2/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Main: 4/0 to 3/0 ACSR or 4/0 to 3/0 STR AWG , Tap: 2/0 to #1 ACSR or 2/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Show More...

• Thickness

  

  • .007 (30)
  • .0085 (1)
  • 0.003 in;0.07 mm (1)
  • 0.006 (1)
  • 0.007 (1)
  • 0.007 in (2)
  • 0.01 (2)
  • 0.01 in (1)
  • 0.02 (6)
  • 0.02 in;0.51 mm (5)
  • 0.025 (11)
  • 0.025 in (2)
  • 0.025 in;0.64 mm (5)
  • 0.03 (3)
  • 0.03 in;0.75 mm (2)
  • 0.03 in;0.76 mm (1)
  • 0.035 (4)
  • 0.035 in (1)
  • 0.035 in;0.89 mm (1)
  • 0.035 in;1 mm (1)
  • 0.04 (25)
  • 0.04 in;1 mm (1)
  • 0.04 INCH (2)
  • 0.040000000000000 (3)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.047 (2)
  • 0.047 in (1)
  • 0.048 in;1.22 mm (1)
  • 0.049 in;1.25 mm (1)
  • 0.049000000000000 (1)
  • 0.05 (36)
  • 0.05 in;1.2 mm (6)
  • 0.05 in;1.3 mm (9)
  • 0.05 in;1.31 mm (4)
  • 0.052 (1)
  • 0.052000000000000 (3)
  • 0.053 (1)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.057 in (1)
  • 0.06 (22)
  • 0.06 in;1.52 mm (1)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.060000000000000 (1)
  • 0.062 in (2)
  • 0.062500000000000 (1)
  • 0.07 (13)
  • 0.07 in;1.7 mm (1)
  • 0.070 in (1)
  • 0.075 (1)
  • 0.075 in;1.91 mm (4)
  • 0.076000000000000 (1)
  • 0.08 (7)
  • 0.08 in (6)
  • 0.080000000000000 (4)
  • 0.085 in;2.15 mm (2)
  • 0.09 (2)
  • 0.09 in;2.3 mm (1)
  • 0.090000000000000 (1)
  • 0.094 in (2)
  • 0.104 in (1)
  • 0.12 (1)
  • 0.125 in (3)
  • 0.132 in (1)
  • 0.198 in;5.03 mm (1)
  • 0.205 in (1)
  • 0.229 in;5.817 mm (1)
  • 0.5 mil (3)
  • 0.508 in (1)
  • 0.89 in (1)
  • 022 (1)
  • 057 (2)
  • 1.125 in (1)
  • 1.13 in (2)
  • 1.26 in (1)
  • 1/16 (7)
  • 1/16 in (1)
  • 1/4 in (2)
  • 1/4 INCH (2)
  • 1/8 (1)
  • 1/8 in (1)
  • 10 (4)
  • 10 mil (3)
  • 10 mil;0.25 mm (5)
  • 11 ga (2)
  • 12 (2)
  • 12 ga (2)
  • 12 mil;0.3 mm (1)
  • 125 (1)
  • 125 mil (2)
  • 15 (1)
  • 18 mm (1)
  • 2.25 in;57.2 mm (1)
  • 20 (2)
  • 22 (1)
  • 26 (1)
  • 3 mil (1)
  • 3 mil;0.08 mm (1)
  • 3.313 in;84.2 mm (1)
  • 3.5 mil (1)
  • 3/32 (3)
  • 3/64 (4)
  • 3/8 in (1)
  • 30 (3)
  • 30 mil (3)
  • 30 mil;0.76 mm (3)
  • 30 mil;0.762 mm (1)
  • 4 (1)
  • 4 mil (2)
  • 4 mil;0.004 in;0.102 mm (2)
  • 4.5 mil (1)
  • 5 (1)
  • 5 mil;0.005 in;0.127 mm (1)
  • 5.0 (1)
  • 5/64 in (2)
  • 6 mil (2)
  • 7 mil (9)
  • 7 mil;0.177 mm (10)
  • 7/32 in (2)
  • 7/64 in (1)
  • 8 mil (1)
  • 8.5 mil (3)
  • 9 mil (2)
  • 9/64 (1)
  • 90 mil (1)
  • NA (1)
  • Thin (2)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1 AWG (Copper Tap Range);#1 AWG (Copper Stranded Run);#1 AWG (Copper Solid Tap);#1 AWG (Copper Solid Run Size) (1)
  • #1 AWG (Copper Tap Range);#1 AWG (Copper Stranded Run);#1 AWG (Copper Solid Tap);#1 AWG (Copper Solid Run Size);#2 A AWG (CopperWeld Stranded Tap Size);#2 A AWG (CopperWeld Stranded Run Size) (1)
  • #1 AWG (Solid);2/0 AWG (Stranded) (1)
  • #1 AWG (Solid);4/0 AWG (Stranded) (1)
  • #1 AWG (Stranded) (1)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (2)
  • #1/0 AWG (Stranded) (2)
  • #10 AWG (24)
  • #10 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #10 AWG (Solid Equal Main and Tap) (1)
  • #10 AWG (Solid);#2 AWG (Stranded) (2)
  • #10 AWG (Stranded);#10 AWG (Solid) (1)
  • #10 AWG/4 sq.mm (6)
  • #10 AWG;6.00 mm2 (1)
  • #12 AWG (5)
  • #12 AWG/2.5 sq.mm (3)
  • #14 AWG (18)
  • #14 AWG/1.5 sq.mm (1)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (4)
  • #2 AWG (17)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (ASCR );#1 and #2 AWG (Stranded );#1 AWG (Solid ) (1)
  • #2 AWG (Copper Tap);#2 AWG (Copper Stranded Run);#4 AWG (CopperWeld Stranded Tap Size);#2 AWG (Copper Solid Tap);#2 AWG (Copper Solid Run Size);#6D AWG (CopperWeld Stranded Run Size) (1)
  • #2 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #2 AWG (Run and Tap1);25 sq.mm (Run and Tap1);#8 AWG (Tap2 and Tap3);6 sq.mm (Tap2 and Tap3) (1)
  • #2 AWG (Run and Tap-Stranded or Solid) (1)
  • #2 AWG (Run);35 sq.mm (Run);#4-#2 AWG (Tap);25-35 sq.mm (Tap);#1 AWG (Run);35 sq.mm (Run);#4-#3 AWG (Tap);25 sq.mm (Tap);1/0 AWG (Run);50 sq.mm (Run);#12-#4 AWG (Tap);4-25 sq.mm (Tap) (1)
  • #2 AWG (Solid);#2/0 AWG (Stranded) (1)
  • #2 AWG (Stranded) (7)
  • #2/0 AWG (1)
  • #2/0 AWG (Stranded) (1)
  • #3 AWG (Range for Equal Main and Tap-Solid);#16 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #3 AWG (Stranded);#2 AWG (Solid) (3)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (13)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (ASCR);#2 AWG (Solid ) (1)
  • #4 AWG (Copper Tap);#4 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Stranded Run);#4 AWG (Copper Solid Tap);#4 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Solid Run Size);3#10-8D AWG (CopperWeld Stranded Run Size) (1)
  • #4 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #4 AWG (Run and Tap);25 sq.mm (Run and Tap);#3 AWG (Run);25 sq.mm (Run);#5 AWG (Tap);16 sq.mm (Tap);#2 AWG (Run);35 sq.mm (Run);#12-#6 AWG (Tap);4-16 sq.mm (Tap) (1)
  • #4 AWG (Stranded Main);#4 AWG (Stranded Main) (1)
  • #4 AWG (Stranded) (4)
  • #4 AWG (Stranded);#14 AWG (Solid) (1)
  • #4/0 AWG (1)
  • #5 AWG (Stranded);#4 AWG (Solid);16 sq.mm (Stranded) (1)
  • #6 AWG (28)
  • #6 AWG (ASCR );#4 AWG (Solid ) (1)
  • #6 AWG (Range for Equal Main and Tap);#4 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #6 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #6 AWG (Solid Equal Main and Tap) (1)
  • #6 AWG (Solid);#4 AWG (Stranded) (1)
  • #6 AWG (Stranded) (6)
  • #8 AWG (12)
  • #8 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #8 AWG (Solid Equal Main and Tap) (1)
  • #8 AWG (Stranded) (2)
  • #8 AWG/6 sq.mm (1)
  • #8 AWG;#10 AWG (1)
  • (1) #10 AWG;(2) #14 AWG;(1) #16 AWG (1)
  • (1) #8 AWG;(3) #10 AWG (1)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #12 AWG (1)
  • (2) #14 AWG (2)
  • (2) #16 AWG (1)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (7)
  • (3) #16 AWG (4)
  • (4) #10 AWG (1)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (17)
  • 1/0 AWG (ACSR);1/0 AWG (Stranded) (1)
  • 1/0 AWG (ASCR );1/0 AWG (Stranded );#1 AWG (Solid ) (1)
  • 1/0 AWG (ASCR);1/0 AWG (Stranded);2/0 AWG (Compact Conductor-Stranded) (1)
  • 1/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 1/0 AWG (Run and Tap-Stranded) (1)
  • 1/0 AWG (Run-Stranded);#2 AWG (Tap-Stranded) (1)
  • 1/0 AWG (Stranded) (5)
  • 1/0 AWG (Stranded);#4 AWG (Solid) (1)
  • 1/0 AWG (Stranded);1/0 AWG (Solid);50 sq.mm (Stranded) (1)
  • 10 AWG (1)
  • 12 AWG (5)
  • 12 AWG STRANDED (1)
  • 14 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (16)
  • 2/0 AWG (ASCR);2/0 AWG (Stranded);3/0 AWG (Compact Conductor-Stranded) (1)
  • 2/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 2/0 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 2/0 AWG (Stranded ) (1)
  • 2/0 AWG (Stranded) (5)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 2/0 to 4/0 AWG (Solid);1/0 AWG to 250 kcmil (Stranded) (1)
  • 250 kcmil (9)
  • 250 kcmil (Stranded) (2)
  • 250 kcmil to #1AWG (Range of Equal Main and Tap);#8 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 250 MCM (12)
  • 250 MCM (Range of Equal Main and Tap-Stranded);1/0 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 3/0 AWG (11)
  • 3/0 AWG (Run-Stranded);#2 AWG (Tap-Stranded or Solid) (1)
  • 3/0 AWG (Run-Stranded);1/0 AWG (Tap-Stranded) (1)
  • 3/0 AWG (Stranded) (1)
  • 300 kcmil (2)
  • 300 MCM (1)
  • 350 kcmil (8)
  • 350 kcmil (Range for Equal Main and Tap);1/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 350 kcmil (Stranded) (1)
  • 350 MCM (6)
  • 4/0 AWG (6)
  • 4/0 AWG (ASCR);4/0 AWG (Stranded) (1)
  • 4/0 AWG (Range for Equal Main and Tap-Stranded);#6 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 4/0 AWG (Run and Tap-Stranded or Solid) (1)
  • 500 kcmil (4)
  • 500 kcmil (Main);240 m2 (Main);120 m2 (Tap);250 kcmil (Tap) (1)
  • 500 kcmil (Range for Equal Main and Tap);2/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 500 kcmil (Stranded) (1)
  • 500 MCM (9)
  • 600 kcmil (4)
  • 600 kcmil (Stranded) (1)
  • 600 MCM (3)
  • 750 MCM (2)
  • 8 AWG (2)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:#3, #4, #6 AWG (ACSR), #2, #3, #4, #6 AWG (Stranded), #1, #2, #3, #4 AWG (Solid);Standard Conductor-Tap A:#8, #10, #12, #14 AWG (Stranded), #8, #10, #12, #14 AWG (Solid) (1)
  • Standard Conductor-Main:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2, #3, #4 (ASCR), 2/0, 1/0, #1, #2, #3 (Stranded), #1, #2 (Solid);Standard Conductor-Tap A:#8, #10 (Stranded), #6, #8, #10 (Solid);Standard Conductor-Tap B:#12, #14 (Stranded), #12, #14 (Solid) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (4)
  • # 2 AWG (STR) (7)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (6)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (4)
  • #12 AWG (1)
  • #12 to #6 AWG (2)
  • #16 to 10 AWG (1)
  • #2 to 4/0 AWG (2)
  • #3/0 AWG to 400 kcmil (1)
  • #4 AWG (1)
  • #6 to #2 AWG (ASCR);#6 to #2 AWG (AAAC);#6 STR to #1 Solid AWG (1)
  • #8 to 1/0 AWG (2)
  • (2) 14 AWG, (3) 14 AWG, (2) 12 AWG, (3) 12 AWG (1)
  • (2) 14 AWG/(2) 12 AWG (2)
  • (2) 14 To (3) 10 AWG (3)
  • (3) 2 AWG Service Entrance Utility Cable (1)
  • (3) 6 AWG SERVICE ENTRANCE UTILITY CABLE (1)
  • 0.0625 AWG (2)
  • 0.31 (1)
  • 0.375 To 0.706 In OD (1)
  • 0.38 (1)
  • 0.420 To 0.700 In OD (1)
  • 0.62 (1)
  • 1 AWG (8)
  • 1 in (1)
  • 1 In Conduit/Cable (1)
  • 1/0 AWG (11)
  • 1/0 AWG (STR) (6)
  • 1/0 AWG-250 MCM (2)
  • 1/0 to 4 AWG (ASCR);1/0 to 4 AWG (AAAC);2/0 STR to 2 Solid AWG (1)
  • 1/2 in (1)
  • 1/4 in (2)
  • 1/8 in (3)
  • 1-1/2 INCH (1)
  • 12 - 10 (1)
  • 12 AWG, 14 AWG (3)
  • 14 to 2, 12 to 2 (4)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 14/2 AWG And 14/3 AWG Armored Cable, 14/2 AWG And 14/3 AWG Metal Clad Cable, 14/2 AWG Through 10/3 AWG Non-Metallic Sheathed Cable, 14/2 AWG And 12/2 AWG Underground Feeder Cable (1)
  • 14/2 AWG Through 10/3 AWG Armored Cable, 14/2 AWG Through 10/3 AWG Metal Clad Cable, 12/3 AWG Through 10/3 AWG Non-Metallic Sheathed Cable, 14/3 AWG And 12/3 AWG Underground Feeder Cable (1)
  • 14/2 AWG;10/3 AWG;12/2 AWG;14/3 AWG (1)
  • 14/2 to 8/3 With Ground (1)
  • 14/3 To 8/3 (1)
  • 14-10 AWG (1)
  • 14-2 AWG (1)
  • 14-2/0 AWG (1)
  • 14-3, 12-3, 10-3 (1)
  • 2 AWG (15)
  • 2 AWG SER Cable And 3/4 IN EMT Conduit (1)
  • 2 Conductor (#12 and #14) (1)
  • 2/0 AWG (11)
  • 2/0 AWG (STR) (5)
  • 2/3 BX, 1" EMT, 1" Greenfield, 2/3 SER (1)
  • 2-4/0 AWG (1)
  • 250 kcmil (7)
  • 250 MCM (STR) (5)
  • 250 to 750 kcmil (1)
  • 250-500 MCM (1)
  • 3/0 AWG (9)
  • 3/0 AWG (STR) (6)
  • 3/0-4 AWG (1)
  • 3/16 in (2)
  • 3/4 in (1)
  • 3/8 in (2)
  • 300 kcmil (1)
  • 300 MCM (STR) (2)
  • 35 (1)
  • 350 kcmil (6)
  • 350 MCM (STR) (5)
  • 4 AWG (9)
  • 4/0 AWG (10)
  • 4/0 AWG (STR) (5)
  • 4/0 AWG SER Cable And 4/0 AWG SEU Cable (1)
  • 4/0 S.E. Greenfield, Large BX, NM Cable, Tubing (1)
  • 4/0 to 2/0 AWG (ASCR);4/0 to 2/0 AWG (AAAC);4/0 to 2/0 STR AWG (1)
  • 4/0-14 AWG (2)
  • 400 AWG (1)
  • 400 kcmil (2)
  • 400 MCM (STR) (2)
  • 500 kcmil (4)
  • 500 MCM (STR) (6)
  • 6 AWG (11)
  • 6 AWG And 8 AWG SEU Cable (1)
  • 600 kcmil (6)
  • 600 MCM (STR) (2)
  • 6-1/0 AWG (1)
  • 700 kcmil (2)
  • 750 kcmil (2)
  • 750 MCM (STR) (3)
  • 8 - 2 (1)
  • 8 AWG (7)
  • 8/3 AWG;6/3 AWG;14/2 AWG;8/2 AWG (1)
  • 8-1/0 AWG (1)
  • 8-2 AWG (1)
  • 8-2/0 AWG (1)
  • NA (14)
  • Show More...

• Weight

  

  • 0.0001 lb (1)
  • 0.0003 lb (2)
  • 0.0004 lb (1)
  • 0.0006 lb (4)
  • 0.001 lb (2)
  • 0.0018 lb (1)
  • 0.002 lb (2)
  • 0.0025 lb (3)
  • 0.003 lb (8)
  • 0.0033 lb (1)
  • 0.0034 lb (1)
  • 0.0037 lb (3)
  • 0.004 lb (8)
  • 0.005 lb (12)
  • 0.0056 lb (2)
  • 0.006 lb (8)
  • 0.0062 lb (2)
  • 0.008 lb (1)
  • 0.01 (2)
  • 0.01 lb (102)
  • 0.01 LB (Each) (2)
  • 0.01 lb/EA (14)
  • 0.011 lb (2)
  • 0.02 lb (36)
  • 0.02 lb/EA (22)
  • 0.022 lb/EA (1)
  • 0.03 (1)
  • 0.03 lb (22)
  • 0.03 LB (Each) (1)
  • 0.03 lb/EA (17)
  • 0.033 lb/EA (1)
  • 0.0344 lb/EA (1)
  • 0.04 lb (11)
  • 0.04 lb/EA (14)
  • 0.05 lb (12)
  • 0.05 lb/EA (11)
  • 0.052 lb/EA (1)
  • 0.055 lb/EA (1)
  • 0.06 lb (7)
  • 0.06 lb/EA (14)
  • 0.07 lb (13)
  • 0.07 lb/EA (6)
  • 0.073 lb/EA (1)
  • 0.08 lb (7)
  • 0.08 lb/EA (16)
  • 0.085 lb/EA (1)
  • 0.09 lb (10)
  • 0.09 lb/EA (12)
  • 0.1 lb (6)
  • 0.1 lb/EA (8)
  • 0.10 lb/EA (2)
  • 0.11 lb (9)
  • 0.11 lb/EA (2)
  • 0.116 lb/EA (1)
  • 0.12 lb (4)
  • 0.12 lb/EA (7)
  • 0.123 lb (1)
  • 0.13 lb (6)
  • 0.13 lb/EA (16)
  • 0.14 lb (1)
  • 0.14 lb/EA (6)
  • 0.15 lb (7)
  • 0.15 lb/EA (4)
  • 0.16 lb (4)
  • 0.16 lb/EA (4)
  • 0.17 lb (3)
  • 0.17 lb/EA (5)
  • 0.18 lb (4)
  • 0.19 lb (5)
  • 0.19 lb/EA (9)
  • 0.2 lb (7)
  • 0.2 lb/EA (1)
  • 0.21 lb (4)
  • 0.21 lb/EA (2)
  • 0.22 lb (12)
  • 0.22 lb/EA (2)
  • 0.23 lb (2)
  • 0.24 lb (3)
  • 0.2400 lb/EA (1)
  • 0.25 lb (7)
  • 0.25 lb/EA (4)
  • 0.26 lb (5)
  • 0.26 lb/EA (4)
  • 0.27 lb (3)
  • 0.28 lb (2)
  • 0.28 lb/EA (4)
  • 0.29 lb (1)
  • 0.3 lb (3)
  • 0.3 lb/EA (3)
  • 0.30 lb/EA (1)
  • 0.31 lb (1)
  • 0.31 lb/EA (3)
  • 0.32 lb (3)
  • 0.325 lb/EA (1)
  • 0.34 lb (4)
  • 0.35 lb (3)
  • 0.35 lb/EA (3)
  • 0.36 lb (4)
  • 0.37 lb (4)
  • 0.37 lb/EA (2)
  • 0.38 lb (5)
  • 0.38 lb/EA (2)
  • 0.4 lb (3)
  • 0.41 lb (3)
  • 0.41 lb/EA (2)
  • 0.44 lb (4)
  • 0.45 lb (3)
  • 0.45 lb/EA (3)
  • 0.46 lb (4)
  • 0.46 lb/EA (1)
  • 0.47 lb (1)
  • 0.48 lb (2)
  • 0.49 lb (3)
  • 0.5 lb (5)
  • 0.50 lb;0.23 kg (1)
  • 0.51 lb (1)
  • 0.53 lb/EA (2)
  • 0.54 lb (1)
  • 0.55 lb (2)
  • 0.55 lb/EA (2)
  • 0.56 lb (3)
  • 0.58 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.6 lb (3)
  • 0.61 lb (2)
  • 0.62 lb (2)
  • 0.62 lb/EA (2)
  • 0.63 lb (2)
  • 0.64 lb (2)
  • 0.65 lb (3)
  • 0.66 lb (2)
  • 0.67 lb (4)
  • 0.7 lb (2)
  • 0.7 lb/EA (2)
  • 0.71 lb (1)
  • 0.72 lb (2)
  • 0.74 lb (1)
  • 0.7460 lb/EA (1)
  • 0.75 lb (2)
  • 0.75 lb/EA (1)
  • 0.77 lb/EA (1)
  • 0.78 lb (1)
  • 0.79 lb (1)
  • 0.79 lb/EA (2)
  • 0.81 lb (1)
  • 0.81 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.84 lb (2)
  • 0.86 lb (1)
  • 0.87 lb (1)
  • 0.87 lb/EA (1)
  • 0.89 lb (1)
  • 0.93 lb (2)
  • 0.93 lb/EA (1)
  • 0.94 lb (2)
  • 0.94 lb/EA (1)
  • 0.97 lb (2)
  • 0.99 lb (2)
  • 1 lb (9)
  • 1 lb/EA (29)
  • 1.01 lb (3)
  • 1.03 lb (4)
  • 1.04 lb (3)
  • 1.05 lb (2)
  • 1.08 lb (1)
  • 1.1 lb;0.5 kg (2)
  • 1.16 lb (1)
  • 1.17 lb (1)
  • 1.2 lb (2)
  • 1.21 lb (2)
  • 1.23 lb (1)
  • 1.26 lb (2)
  • 1.27 lb (3)
  • 1.3099 lb/EA (1)
  • 1.33 lb (3)
  • 1.34 lb (1)
  • 1.35 lb (1)
  • 1.36 lb (1)
  • 1.37 lb (1)
  • 1.39 lb (2)
  • 1.4 lb (2)
  • 1.42 lb (1)
  • 1.48 lb (2)
  • 1.49 lb (3)
  • 1.5 lb (2)
  • 1.51 lb (1)
  • 1.56 lb (1)
  • 1.57 lb (1)
  • 1.57 lb/EA (1)
  • 1.6 lb (1)
  • 1.67 lb (3)
  • 1.67 lb/EA (1)
  • 1.75 lb (3)
  • 1.80 lb (1)
  • 1.83 lb (1)
  • 1.86 lb (2)
  • 1.87 lb/EA (2)
  • 1.9 lb (1)
  • 1.93 lb (3)
  • 1.95 lb (1)
  • 1.97 lb/EA (1)
  • 10 lb (7)
  • 11.59 g (1)
  • 11.66 g (1)
  • 11.88 g (1)
  • 12.75 g (Net Weight);12 g (1)
  • 14.26 g (1)
  • 19 lb/EA (1)
  • 19.47 g (Net Weight);21.38 g (1)
  • 2 lb (2)
  • 2 lb/EA (2)
  • 2.02 lb (2)
  • 2.1 lb (1)
  • 2.1 oz (59 g) (3)
  • 2.1 oz (60 g) (1)
  • 2.11 lb (2)
  • 2.15 lb (1)
  • 2.15 lb/EA (1)
  • 2.2 lb (1)
  • 2.25 lb (1)
  • 2.5 lb (2)
  • 2.54 lb (1)
  • 2.59 lb (1)
  • 2.62 g (1)
  • 2.75 lb (1)
  • 2.76 lb/EA (1)
  • 2.7999 lb/EA (1)
  • 3.053 g (1)
  • 3.5 lb (4)
  • 3.52 (1)
  • 3.7 g (1)
  • 3.84 lb (1)
  • 312.5 g (1)
  • 35 lb (1)
  • 4 lb (1)
  • 4.05 lb (1)
  • 4.25 lb/EA (1)
  • 4.283 g (1)
  • 4.35 lb/EA (1)
  • 4.4 lb (1)
  • 4.5 lb (2)
  • 4.75 lb (2)
  • 5.54 lb (1)
  • 6.15 lb (1)
  • 6.681 g (1)
  • 6.724 g (1)
  • 7 lb (1)
  • 7.51 g (Net Weight);7 g (1)
  • 9.57 g (Net Weight);9 g (1)
  • Show More...

• Size

  

  • #10 (24)
  • #10 – #12 (1)
  • #10 X 1 IN (11)
  • #10 X 1/2 IN (4)
  • #10 x 1-1/2 IN (5)
  • #10 x 1-1/4 IN (3)
  • #10 x 2 IN (4)
  • #10 x 2-1/2 IN (1)
  • #10 x 3 IN (1)
  • #10 x 3/4 IN (5)
  • #10-24 x 1 IN (1)
  • #10-32 x 1/2 IN (1)
  • #10-32 x 1-1/2 IN (1)
  • #10-32 x 2 IN (1)
  • #12 (2)
  • #12 x 1 IN (3)
  • #12 x 1-1/2 IN (5)
  • #12 x 1-1/4 IN (2)
  • #12 x 2 IN (2)
  • #12 x 3/4 IN (2)
  • #12;#14 (3)
  • #14 — #10 AWG Code STR, #12 — #10 AWG Code SOL (4)
  • #2 AWG Class B, C, G, H, I, K, M and DLO (3)
  • #2 AWG Class K and M and DLO (2)
  • #2 AWG Code (13)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (7)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (3)
  • #6 (16)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (9)
  • #6 AWG Code (10)
  • #6 x 1 IN (6)
  • #6 x 1-1/2 IN (2)
  • #6 x 1-1/4 IN (4)
  • #6 x 1-1/8 IN (3)
  • #6 x 1-5/8 IN (3)
  • #6 X 2 IN (4)
  • #6 x 7/16 IN (1)
  • #6-32 x 1 IN (3)
  • #6-32 x 1/2 IN (4)
  • #6-32 x 1-1/2 IN (3)
  • #6-32 x 1-1/4 IN (3)
  • #6-32 x 2 IN (4)
  • #6-32 x 2-1/2 IN (2)
  • #6-32 x 3 IN (2)
  • #6-32 x 3/4 IN (3)
  • #8 (15)
  • #8 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #8 AWG Code (5)
  • #8 x 1 IN (6)
  • #8 X 1/2 IN (7)
  • #8 x 1-1/2 IN (4)
  • #8 x 1-1/4 IN (10)
  • #8 x 2 IN (2)
  • #8 x 2-1/2 IN (2)
  • #8 x 3 IN (1)
  • #8 X 3/4 IN (7)
  • #8-32 X 1 IN (2)
  • #8-32 x 1/2 IN (1)
  • #8-32 x 1-1/2 IN (1)
  • #8-32 x 1-1/4 IN (1)
  • #8-32 x 2 IN (2)
  • #8-32 x 3 IN (1)
  • #8-32 x 3/4 IN (1)
  • 0.22 x 1.56 es (3)
  • 0.235 in H x 2 in W (1)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.335 in H x 2 in W (1)
  • 0.439 in H x 2 in W (1)
  • 0.645 in H x 1 in W (1)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 in (3)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1 In Conduit (6)
  • 1.00 x 0.34 (2)
  • 1.00 x 0.44 (2)
  • 1.56 in H x 0.22 in W (2)
  • 1/0 AWG Class B, C, G, H, I, K, M and DLO (2)
  • 1/0 AWG Code (3)
  • 1/2 (10)
  • 1/2 in (15)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (3)
  • 1/2 In, 3/4 In Conduit (8)
  • 1/2 x 1 (2)
  • 1/2 x 1 in (4)
  • 1/2 x 1-1/2 (2)
  • 1/2 x 1-1/4 (3)
  • 1/2 x 2 (3)
  • 1/2 x 2-3/4 (1)
  • 1/2 x 3-3/4 (1)
  • 1/2 x 4 (2)
  • 1/2 X 4-1/2 (3)
  • 1/2 x 5 (1)
  • 1/2 x 5-1/2 (1)
  • 1/2-13 x 2 (2)
  • 1/2X3-3/4 (2)
  • 1/2x5 (2)
  • 1/4 (22)
  • 1/4 In-20 TPI (2)
  • 1/4 x 1 (7)
  • 1/4 x 1/2 (5)
  • 1/4 X 1-1/2 (8)
  • 1/4 X 1-1/2 IN Marker (11)
  • 1/4 x 1-1/4 (9)
  • 1/4 x 1-3/4 (2)
  • 1/4 x 1-3/8 (1)
  • 1/4 X 2 (10)
  • 1/4 x 2-1/2 (3)
  • 1/4 x 2-1/4 (3)
  • 1/4 x 2-3/4 (1)
  • 1/4 x 3 (5)
  • 1/4 x 3/4 (5)
  • 1/4 x 3-1/4 (3)
  • 1/4 x 4 (3)
  • 1/4 x 7/8 (2)
  • 1/4" (10)
  • 1/4-20 (1)
  • 1/4-20 x 1 (2)
  • 1/4-20 x 1-1/2 (2)
  • 1/4X2 (3)
  • 1/4x3 (2)
  • 1/8 x 3 (1)
  • 10 (14)
  • 10.2 mm (1)
  • 10x1 (6)
  • 1-1/2 In Conduit (2)
  • 1-1/4 in (2)
  • 1-1/4 In Conduit (2)
  • 12 (5)
  • 12 - 10 (2)
  • 16 - 14 (2)
  • 2 In Conduit (2)
  • 2 IN x 100 FT (2)
  • 2 INCH (16)
  • 2.00 x 0.44 (2)
  • 2.01 in x 1.12 in x 1.43 in (2)
  • 2.25 in H x 4.5 in W (1)
  • 2/0 AWG Code (6)
  • 22 - 18 (3)
  • 2-25/32 inch (13)
  • 250 kcmil Code (2)
  • 3 in H x 1 in W (1)
  • 3/0 AWG Code (3)
  • 3/16 x 1-1/4 (4)
  • 3/16 x 3 (3)
  • 3/32 In Thickness Purlin (2)
  • 3/4 in (4)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (6)
  • 3/4 IN x 10 FT (2)
  • 3/8 (15)
  • 3/8 in (3)
  • 3/8 In Conduit (4)
  • 3/8 x 1 (4)
  • 3/8 x 1/2 (2)
  • 3/8 x 1-1/2 (5)
  • 3/8 x 1-1/4 (4)
  • 3/8 x 1-1/8 (1)
  • 3/8 x 1-7/8 (1)
  • 3/8 x 2 (4)
  • 3/8 x 2-1/4 (1)
  • 3/8 x 2-3/4 (2)
  • 3/8 x 3 (4)
  • 3/8 x 3/4 (4)
  • 3/8 x 3-3/4 (1)
  • 3/8 x 4 (3)
  • 3/8 x 5 (2)
  • 3/8" (5)
  • 3/8-16 x 1-9/16 (2)
  • 3/8x2 (2)
  • 3/8X3 (4)
  • 3-1/2 Inch (15)
  • 350 kcmil Code (2)
  • 4.33 in W x 200 ft L (5)
  • 4/0 AWG Class B, C, G, H, I, K, M and DLO (3)
  • 4/0 AWG Class K and M and DLO (2)
  • 4/0 AWG Code (6)
  • 5/16 (2)
  • 5/16 x 1 (2)
  • 5/16" (3)
  • 500 kcmil Code (2)
  • 6 (21)
  • 6 In (2)
  • 6-32 (3)
  • 7/16 In Diameter (2)
  • 8 (20)
  • 9/16 in (6)
  • 9/16 In Diameter (2)
  • 9/16 x 1-1/4 in (3)
  • Fine Point (2)
  • H=1.01 - W=.717 - ID=.252 (2)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=6.00 - W=3.25 (2)
  • L(2.220) x W(2.520) x H(0.750) (1)
  • L(3.000) x W(3.023) x H(0.870) (1)
  • L(6.250) x W(6.250) x H(4.250) (1)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.120 - W=1.250 - H=1.348 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.620 - W=1.750 - H=1.750 (2)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • Length 1-13/16 inch (3)
  • Length 4-13/16 inches (1)
  • NA (8)
  • Premium (2)
  • Splice 4 inch, Sleeve 5-1/2 inch (6)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (20)
  • Thickness - 7mil - Length-66' - Width 3/4" (10)
  • Thickness=.030 - Width=.75 - Length=22 feet (3)
  • VARIOUS SIZ (2)
  • Show More...

• Product Type

  

  • "Z" Purl" Hanger, 1/4" Threaded Rod (2)
  • #6 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (3)
  • 2 Position Bridge (3)
  • 3/4" Staples Plastic Insulated 2 Conductor Romex 12-3 (2)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (5)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (4)
  • 3M™ Cold Shrink End Caps Ec Series (4)
  • 3M™ Cold Shrink Inline Splice Kits 5730 Series (3)
  • 3M™ Cold Shrink Inline Splice Kits 5740 Series (2)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (3)
  • 3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 551 (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (3)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (6)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-S, 7680-S & 7690 (11)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-T & 7690-T Serie (9)
  • 3M™ Heat Shrink Cable Breakout Boot (3)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (9)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (22)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (4)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (7)
  • 3M™ Highland™ Wire Connectors (2)
  • 3M™ Motor Lead Pigtail Splice Kits 5316-5319 (3)
  • 3M™ Motor Lead Pigtail Splice Kits 5321-5324 (3)
  • 3M™ Motor Lead Pigtail Splice Kits, 1-Hole Lug Connections 5 (4)
  • 3M™ Multi-Purpose Duct Tape 3900 (2)
  • 3M™ Rejacketing Sleeves RJS Series (6)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchcast™ Inline Splice Kits 72-N Series (2)
  • 3M™ Scotchcast™ Multi-Mold Resin Splice Kits 85 Series (2)
  • 3M™ Scotchcode™ Wire Marker Tape Dispenser STD (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (11)
  • 3M™ Scotchcode™ Wire Marker Write-On Dispensers (2)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Standard Nylon Cable Ties (4)
  • 3M™ Thin-Wall Heat Shrink Tubing Eps-300 (5)
  • 6 X 1-1/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • 6 X 1-5/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • AMT Connector (2)
  • Anchor Kit (10)
  • Automatic Tension Splice Connector (2)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Barricade Tape (6)
  • Barrier Strip (3)
  • Beam Clamp (9)
  • Black Fine Point Marker (2)
  • Black Medium Point Marker (2)
  • Butt Splice (7)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Hook (2)
  • Cable Staple (12)
  • Cable Tie (59)
  • Cable Tie Mount (4)
  • Cable Tie Mounting Base (9)
  • Ceiling Wire (2)
  • Channel Nut (2)
  • Clip, Conduit, (4)
  • Compression (34)
  • Compression Connector (7)
  • Compression Lug (23)
  • Compression Splice (3)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Concrete Anchor System (3)
  • Conductor Lug (11)
  • Conduit to Beam Fastener (7)
  • Conduit to BM FS, 1 1/2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1/2", 3/4" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to Conduit Fastener (2)
  • Conduit to Rod FS, Guide-Rite, 1/2", 3/4" Conduit Size (2)
  • Copper Comp. Lug, 2 Hole, #2 Awg Flex, 1 (2)
  • Copper Compression Lug (5)
  • Copper Connector (3)
  • Coupling Nut (3)
  • Crimp On Wire Connector (2)
  • C-Type Copper Compression Tap (8)
  • Cu TP 2HL Lug Longbrl 4/0 3/8B Pur (2)
  • Disconnect Terminal (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drop in Anchor (2)
  • Drop-In Anchor (2)
  • Drywall Screw (18)
  • Duct Tape (4)
  • Easy-Splice Roll On (2)
  • Electrical Tape (20)
  • End Bracket (2)
  • End Cover (6)
  • End Plate (2)
  • Eye Bolt (3)
  • Feed Through Terminal (6)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Female Disconnector (5)
  • Fender Washer (14)
  • Filament Tape (2)
  • Fish Tape (2)
  • Flat Washer (15)
  • Flex Lug (2)
  • Fork Terminal (13)
  • Friction Tape (2)
  • Ground Connector (3)
  • Ground Screw (3)
  • Hammer Drive Anchor (3)
  • Hanger, Fixture, Florescentlight (2)
  • Heat Shrink Tube (6)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Bolt (15)
  • Hex Head Masonry Screw (3)
  • Hex Nut (12)
  • H-Type Compression Connector (9)
  • Inline Resin Splicing Kits (2)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Ferrule (4)
  • Insulated Staples (2)
  • Insulating Sleeve (12)
  • Insulation Displacement Connector (4)
  • Insulation-Tap Connector (9)
  • Jack Chain (3)
  • K-Lath Screw (5)
  • Kwikwire Accessory, Toggle Style Y Type (2)
  • Label Polyester 0.75IN X 21FT BK/WT (2)
  • Lag Screw (6)
  • Lay-In Connector (2)
  • Line Measuring Tape (5)
  • Linemeasuring Tape (5)
  • Linerless Rubber Tape (4)
  • Lock Washer (9)
  • Locking Fork (4)
  • Long Barrel Lug (11)
  • Lug (2)
  • Machine Screw (32)
  • Machine Screw Anchor (4)
  • Machine Screw Kit (2)
  • Mechanical (99)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (3)
  • Metal Piercing Screw (3)
  • Multi-Cable Staple (2)
  • Multi-Conductor Terminal Block (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Non Detectable Warning Tape (2)
  • Non-Metallic Cable Connector (2)
  • Nylon Label (2)
  • P1™ Heat Shrink Label (4)
  • Panelboard Lug (3)
  • Partition Plate (2)
  • Pin Terminal (2)
  • Pipe Wrap (2)
  • Plastic Insulated Staple (4)
  • Plug-In Bridge (2)
  • Power Cable Splice Cover (4)
  • Power Cable Termination (4)
  • Power Distribution Block (15)
  • Power Terminal Block (2)
  • Pre-Printed Wire Marker Book (2)
  • Purlin Clip (3)
  • Push-In Connector (3)
  • Push-in Wire Connector (7)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (5)
  • Rod & Wire FS (2)
  • Roof Flashing (2)
  • Roof Jack (2)
  • Round Head Machine Screw (6)
  • RUN/TAP (8)
  • Scotch® Multi-Colored Vinyl Electrical Tape 35 (11)
  • Scotch® Varnished Cambric Tape 2510 (3)
  • Scotch® Varnished Cambric Tape 2520 (2)
  • Screw Connection Single Level-Through-Feed (7)
  • Screw Gun Bracket (2)
  • Self Drill Screw (4)
  • Self Drilling Screw (23)
  • Service Entrance Compression Splice (5)
  • Service Entrance Strap (2)
  • Service Post Connector (14)
  • Sharp Frame Screw (2)
  • Sheet Metal Screw (10)
  • S-Hook (2)
  • Single Barrel Lug (6)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Sleeve Anchor (7)
  • Spiral Wrap (2)
  • Splice (34)
  • Splice Cap (2)
  • Splice Connector (2)
  • Splice Kit (5)
  • SPLICE REDUCER (6)
  • Splicer Reducer (3)
  • Splicing Connector (2)
  • Split Bolt Connector (36)
  • Split Lock Washer (3)
  • Spring Nut (3)
  • SPST Support Box (2)
  • Square Washer (3)
  • Stable (2)
  • Standard Barrel Lug (17)
  • Standard Barrel Single Hole Compression Lug (18)
  • Staple (24)
  • Submersible Connector (2)
  • Tap Bolt (15)
  • Tek Screw (13)
  • Terminal (138)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Terminal, Ring, Vinyl Insulated, Blue, Butted Seam, 16-14 Aw (4)
  • Terminal, Spade, Vinyl Insulated, Blue, Butted Seam, 16-14 A (3)
  • Thin Wall Heat Shrink Tube (16)
  • Thin Wall Shrink Tube (16)
  • Tie Wire (4)
  • Toggle Bolt (10)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (12)
  • Twist-On Wire Nut (5)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Universal End Stop (2)
  • Vinyl Electrical Tape (3)
  • Vinyl Mastic Tape (2)
  • Wall Dog Kit (2)
  • Wall Driller Anchor Kit (3)
  • Wedge Anchor (13)
  • Wedge Clamp (3)
  • Wing Twist Connector (2)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wire Clip (4)
  • Wire Connector (16)
  • Wire Marker Book (10)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (5)
  • Wire Marker Kit (2)
  • Wire Twist Connector (6)
  • Zamac Anchor (4)
  • Show More...

• Overall Length

  

  • 0.201 in;5.1 mm (1)
  • 0.205 in (2)
  • 0.24 in (1)
  • 0.244 in (4)
  • 0.43 in (1)
  • 0.571 in;14.5 mm (3)
  • 0.60 in;15.2 mm (1)
  • 0.65 in (1)
  • 0.650 in;16.5 mm (1)
  • 0.69 in (1)
  • 0.75 in (1)
  • 0.780 in (5)
  • 0.787 in (1)
  • 0.80 in;20.3 mm (2)
  • 0.82 in (1)
  • 0.83 in (1)
  • 0.85 in;22 mm (1)
  • 0.854 in (1)
  • 0.86 in;21.8 mm (1)
  • 0.866 in (1)
  • 0.866 in;22 mm (1)
  • 0.87 in;22.098 mm (2)
  • 0.88 in (1)
  • 0.899 in (2)
  • 0.94 in;23.9 mm (1)
  • 0.95 in (1)
  • 0.95 in;24.1 mm (1)
  • 0.95 in;24.13 mm (1)
  • 0.96 in (1)
  • 0.965 in;24.5 mm (1)
  • 0.97 in (6)
  • 0.971 in (1)
  • 0.98 in;24.9 mm (1)
  • 0.984 in;25 mm (1)
  • 0.986 in (2)
  • 1 (1)
  • 1 in (4)
  • 1 in;25.4 mm (4)
  • 1.00 in (1)
  • 1.004 in;25.5 mm (1)
  • 1.02 in;25.908 mm (1)
  • 1.03 in (2)
  • 1.03 in;26.16 mm (1)
  • 1.03 in;26.162 mm (1)
  • 1.06 in (3)
  • 1.06 in;27 mm (2)
  • 1.07 in (1)
  • 1.087 in;27.6 mm (1)
  • 1.088 in (1)
  • 1.09 in (3)
  • 1.11 in;28 mm (1)
  • 1.12 in (2)
  • 1.13 in (4)
  • 1.14 in;29 mm (1)
  • 1.153 in (2)
  • 1.16 in (5)
  • 1.16 in;29.5 mm (2)
  • 1.161 in (1)
  • 1.201 in (1)
  • 1.23 in;31.2 mm (1)
  • 1.25 in (1)
  • 1.25 in;31.8 mm (1)
  • 1.252 in (1)
  • 1.26 in;32 mm (1)
  • 1.29 in (1)
  • 1.31 in (3)
  • 1.319 in;33.5 mm (1)
  • 1.350 in (1)
  • 1.37 in (1)
  • 1.378 in;35 mm (1)
  • 1.38 in (1)
  • 1.38 in;35.1 mm (2)
  • 1.45 in;36.8 mm (1)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.496 in (1)
  • 1.5 in (2)
  • 1.5 in;38 mm (1)
  • 1.50 in (4)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (2)
  • 1.55 in (1)
  • 1.55 in;39.4 mm (2)
  • 1.574 in (1)
  • 1.575 in;40 mm (1)
  • 1.6 in (1)
  • 1.62 in (2)
  • 1.65 in (3)
  • 1.70 in (1)
  • 1.72 in;43.7 mm (1)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.772 in (1)
  • 1.78 in (1)
  • 1.81 in (2)
  • 1.82 in;46.2 mm (1)
  • 1.831 in;46.5 mm (4)
  • 1.84 in (2)
  • 1.85 in (1)
  • 1.875 in (1)
  • 1.88 in (2)
  • 1.88 in;47.8 mm (1)
  • 1.91 in (1)
  • 1.913 in (2)
  • 1.93 in (3)
  • 1.95 in (1)
  • 1.9688 in (1)
  • 1.97 in (1)
  • 100 ft (1)
  • 1000' (305 m) (1)
  • 1-1/16 in (2)
  • 1-1/2 (1)
  • 1-1/2 in (2)
  • 1-1/2 in (Stud) (1)
  • 1-1/4 in (1)
  • 1-1/4 in (Stud) (1)
  • 1-1/8 in (1)
  • 1-1/8 in (Stud) (1)
  • 1-11/15 in (1)
  • 1-11/32 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 1-19/32 in (1)
  • 13/16 in (1)
  • 1-3/64 in (1)
  • 1-5/32 in (1)
  • 1-61/64 in (1)
  • 17 in (1)
  • 1-7/18 in (1)
  • 1-7/8 in (1)
  • 1-9/32 in (1)
  • 2 in (8)
  • 2 in;51 mm (1)
  • 2.01 in;51.0 mm (1)
  • 2.03 in (3)
  • 2.06 in;52 mm (1)
  • 2.069 in;53.1 mm (1)
  • 2.071 in (1)
  • 2.08 in (1)
  • 2.10 in (2)
  • 2.106 in (1)
  • 2.12 in (1)
  • 2.18 in (2)
  • 2.209 in (1)
  • 2.23 in (1)
  • 2.25 in (4)
  • 2.252 in (1)
  • 2.26 in;57.4 mm (1)
  • 2.27 in (1)
  • 2.28 in (1)
  • 2.31 in;59 mm (1)
  • 2.32 in (1)
  • 2.362 in;60 mm (1)
  • 2.39 in (1)
  • 2.40 in (1)
  • 2.47 in (1)
  • 2.50 in (1)
  • 2.56 in (1)
  • 2.56 in;65 mm (1)
  • 2.58 in (1)
  • 2.60 in (2)
  • 2.61 in (1)
  • 2.63 in (2)
  • 2.677 in (2)
  • 2.68 in (2)
  • 2.70 in (1)
  • 2.75 in (1)
  • 2.77 in (1)
  • 2.795 in (1)
  • 2.81 in (1)
  • 2.81 in;71 mm (1)
  • 2.85 in;72.4 mm (1)
  • 2.88 in (1)
  • 2.88 in;73 mm (1)
  • 2.9 in (4)
  • 2.93 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (1)
  • 2-13/16 in (1)
  • 2-25/32 in (5)
  • 2-3/16 in (1)
  • 2-3/8 in (1)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (2)
  • 3.02 in (1)
  • 3.03 in (1)
  • 3.06 in (1)
  • 3.09 in (1)
  • 3.14 in (1)
  • 3.15 in (1)
  • 3.17 in (1)
  • 3.18 in (2)
  • 3.2 in;81 mm (1)
  • 3.24 in (1)
  • 3.25 in (3)
  • 3.41 in (1)
  • 3.46 in (1)
  • 3.5 in (3)
  • 3.52 in (1)
  • 3.66 in (1)
  • 3.787 in;96.2 mm (1)
  • 3.8 in (1)
  • 3.880 in (1)
  • 3/4 in (1)
  • 31/32 in (1)
  • 3-1/32 in (1)
  • 3-3/16 in (2)
  • 4 in (7)
  • 4.01 in (1)
  • 4.20 in (1)
  • 4.37 in (1)
  • 4.48 in (1)
  • 4.5 in (1)
  • 4.57 in (1)
  • 4.626 in;117.0 mm (1)
  • 4.65 in (1)
  • 4.66 in (1)
  • 4.70 in (1)
  • 4-1/4 in (2)
  • 4-3/16 in (2)
  • 48 in (3)
  • 5.24 in (1)
  • 5.40 in (1)
  • 5.5 in (7)
  • 5.5" (14 cm) (3)
  • 5.50 in (1)
  • 5.52 in (1)
  • 5.540 in;140.7 mm (1)
  • 5.75 in (1)
  • 5.79 in (1)
  • 5.83 in (2)
  • 6.36 in (1)
  • 6.375" (16.2 cm) (1)
  • 6.38 in (2)
  • 6.5 in (1)
  • 6.5" (16.5 cm) (1)
  • 6.62 in (1)
  • 7.25" (18.4 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.52 in (1)
  • 7.75 in (1)
  • 8 in (2)
  • 9.23 in (1)
  • 9/16 in (1)
  • Show More...